Build Daily

Latest

October 09, 2016 23:18

Wicker fence with his hands

Wicker fence - this is the original decoration of the infield that can make a kind of landscape design rustic flavor.Make a braid or a fence with their hands is not difficult, you can use a flexible rod, birch twigs, peeled veneer, boards, bulrush.Also, for the erection of the fence, you can use modern synthetic materials characterized by high strength and wear resistance.

Wicker fence with his hands

Wicker fence with their hands

Video - Weave a web of vines

Article Contents

    • 0.1 Video - Weave a web of vines
  • 1 Wicker fence flexible willow twigs hishands
    • 1.1 workpiece material
    • 1.2 Materials and tools for the construction of the fence
    • 1.3 Step by Step
    • 1.4 Video - Erection of woven fence around the flower beds
  • 2 fence of birch twigs verticalweaving
    • 2.1 materials and tools
    • 2.2 Step by Step
  • 3 Wicker fence with their hands from the boards
    • 3.1 Tools and materials
    • 3.2 Step by Step
    • 3.3 Video- The construction of the fence plank horizontal strapping

For the construction of the fence of the village you can use a variety of materials, durability, longevity and resistance to environmental effects.

Types of trees to weave the fence of the vine

Types of trees to weave the fence of twigs

Table.The material for the manufacture of woven fence

material for the manufacture of woven fence Description
Willow properly harvested and dried material is flexible and durable.From a wide variety of species of this plant almost everything can be used for the construction of wicker fence.From the willow can build two types of fencing - animate and inanimate.Live fencing - is planting the young shoots to the soil, which are formed during the growth in the fence.Cut shoots of plants are used for inanimate fencing.
Reed and cattail These natural materials are fragile and short-lived.Use them for the construction of high-grade fencing of the area - is inappropriate.A few years later the fence will become worthless, and it will have to change completely.Use a cane can be to create a low fence for flowerbeds or zonal demarcation gardening area.
Vine Long and flexible rods are easy to bend, can withstand temperature extremes, high humidity.
Hazel to manufacture fences require flexible shoots.Procurement of raw materials is carried out in early spring before the buds.

Wicker fence flexible willow twigs with their hands

Wicker fence flexible willow twigs with their hands

Wicker fence flexible willow twigs with their hands

Traditional Ukrainian wattle

Traditional Ukrainian wattle

workpiece material

used to make fence is recommended that fresh cutwillow shoots, having excellent flexibility.The optimal time - from September to March.If the bars were procured ahead of time and have become too brittle, you can give them the flexibility of using hot water.It is recommended to soak the raw materials in warm water for a few hours to runners scored moisture and become more pliable.

Materials and tools for the construction of the fence

Vine plaiting

vine plaiting

  1. willow branches with a diameter of 1 to 3 cm.
  2. supporting pillars.It can be used as metal pipes and wooden beams.In the process of forming the fence of the shoots, the support will disappear under the netting.
  3. Hand drill or benzobur.
  4. Garden pruner for pruning the shoots.
  5. wire that will be used for the installation of the ribs stiffening webs.
  6. Self.
  7. screwdriver or screwdriver.
  8. knife.
  9. Shiloh.
  10. Hammer.

Step by Step

Fence of vines

Fence of vines

Step 1. Installing supporting pillars.After applying the markup you want to set the supporting pillars.If the fence is high, it is recommended to have support at a distance of 1 meter from each other.Also high fence requires a lot of support recesses in the ground.Optimally - one third of the total length.

Installation support fence posts

Installing the supporting pillars of the fence

Installation of wooden pillars for the future of the fence

Installation of wooden pillars for the future of the fence

For example, the planned height of the woven fence will be 1.5 meters.Thus, the supports must be equal to the height of 2.2 meters.If metal pipes are used, it is recommended to concrete foundation pillars.Pit digging for supports conveniently using a hand drill.

Installation support fence posts

Installing the supporting pillars of the fence

Supports for fences

supports for fences

Pegs for small enclosures

Pegs for small fences

Step 2. Thick willow twigs with a diameter greater than 3 cm, it is required to dig into the ground 20 -30 cm by 40 cm between the supporting pillars.With these rods will be weaving cloth fence.The length of thick rods must be half a meter higher than the height of the fence.From the protruding ends of the long rods in the end formed a smooth upper edge of the fence.

Wicker fence of twigs

Weaving fence of twigs

Step 3. to during the operation of the fence bottom does not rot, it is recommended the lower strap placed over the ground by 10-15 cm. As the lower strap can be used thick willow vine.To strengthen the fabric of the fence can be together with the first pass through the vine dug into the ground wire rods.The wire is recommended to be attached to the supporting pillars.The first cross-bar of the vine, it is desirable to attach via screws to the supports.

Wicker fence of twigs

Weaving fence of twigs

Step 4. Weave.To create the web barriers used checkerboard weave.The branches of the vines passed through the vertical bars of the full length.The tips of the branches, it is desirable to pull on the inner side of the fence.If the fence is very long, the vines spliced ​​together.After the vertical supports between 3-4 missing a number of vines requires a little knock on the upper shoots hammer, compacting rows.To have turned out strong fabric, it is possible in 7-8 rows of vines to pass the wire.

How to weave the fence of the vine

How to weave the fence of twigs

When netting fence can be used for each number one by one, and a few vine shoots.When the unit turns hurdle fences easier, openwork.If the bundles of plants used, the fence is more monumental, strong.

Weaving

Weave

How to fence

How to fence

Step 5. branches in the last canvases along the edge you want to trim so that they do not extend beyond the pillars.You can fix the runners with self-tapping screws, screwing each to the support.You can use wire.

How to fence

How to fence

How to fence

How to fence

Step 6 .The tops of the vertical supports of thick vines can be cut so that they do not protrude over the canvases.If the vine is flexible, you can simply bend to the inside of the track and pass through weaving.

Step 7. to rustic fencing for many years kept its original colorful appearance, it is desirable to treat the natural material is stained or impregnated.Suffice it via a spray process fence web on both sides with protective materials.

wattle

Wattle

Video - Erection of woven fence around the flower beds

Fence of birch twigs vertical weave

A fence made of birch twigs

Fence of birch twigs

Fence of these branches of a birch - is first and foremostunusual decoration area.Also worth noting is that this is very good stockade protects dacha territory from outside intrusion.Not everyone dares to overcome the tall and rather dangerous-looking fence of vertically standing birch twigs.Make the original fence with their hands is not difficult, the main thing to find the right amount of material for construction.

Wattle - fence for flowerbeds

wattle - a fence for flowerbeds

Materials and tools

  1. poles for the fence.The most commonly used wooden beams or logs with a diameter of 10 cm.
  2. crossbar.Straps length depends on the size of the fence.Each flight is required by 3 blanks.It is recommended to use the wide slats, having a size of 25 by 46 mm.
  3. birch branches.For vertical weave is recommended to use quite thick in diameter material -. Not less than 3-5 cm length of the branches depends on the height of the fence.Optimally - 170 cm
  4. Hammer..
  5. Self.
  6. screwdriver.
  7. rope and stakes to mark the fence.

Step by Step

Step 1. Harvesting of branches for the fence.During the construction of the fence, it is desirable to use fresh birch poles, with good flexibility.This will simplify the process of weaving.Immediately when the workpiece is required to clear completely from the poles of the lateral branches.Length of birch blanks should be the same.

Step 2. Installing supporting pillars.Wooden beams or logs to be processed antiseptic and embedded in the ground by 40-50 cm. If the fence is high, it is possible to concrete supports.In-Ground poles need a distance of 3 meters from each other.

Step 3 .Once the poles are fixed firmly in the ground, you can proceed to the installation of transverse slats.If the width between supports equal to 3 meters, the length of the slats should be 3 m, 10 cm Rods screws are screwed to the posts: one at the top, in the middle of the second, the third - at the bottom..

Vertical fence

Vertical fence

Step 4. Installation birch poles between the slats.First pole slips between the cross bars from top to bottom.When weaving birch branches bend between the cross members.The second branch is attached between the mirror strips, relative to the first.The third branch is attached exactly like the first.So fasten all birch branches until the end of the web.With a hammer tamp series branches need to decrease the space between them.

How to fence

How to fence

Over time, raw birch branches in a cloth dry and no longer deformed.This fence will last for many years, decorating private plot and protecting it from intruders.

Wicker fence with their hands from the boards

Fence braided from boards

fence woven from boards

Fence braided from boards

fence woven from boards

Wicker fence boards look much more interesting and original than conventional fence.That's why many owners choose to build gardens on its territory beautiful and durable wicker fences made of wood.It can also be used for woven fence peeled veneer, MDF panels, plastic panels, but the tree is considered to be the most affordable price for the material.

Tools and materials

  1. supporting bar.Since the fence from boards - heavy construction, it is recommended to use a timber with a section of 100 to 100 mm.The length of the bar depends on the height of the fence.You also need to take into account the depth of the dive support in the ground during the concreting.
  2. planed boards for weaving.Optimally use workpiece with dimensions 150 mm by 20 mm.Length - 2100 mm.
  3. Vertical rails for binding.blanks length should equal the length of the reference beam.In each painting requires one vertical bar.
  4. tape or circular saw for cutting wood.
  5. Screws and screwdriver.
  6. bitumen for processing supports.
  7. antiseptic and paint for wood.
  8. drill for drilling holes.

Step by Step

Wicker fence with their hands from the boards

Wicker fence with their hands from the boards

Step 1. Layout and installation of the supporting timber.Distance between supports should not be more than 2 meters.To guard has served for many years, it is recommended to concrete beams, carefully observing their upright position.Those ends of the timber, which will be shipped to the land requires a well to soak the bitumen mastic.

Step 2. Cutting boards.Timber for horizontal piping should be the same size.

Step 3. Installation vertical bars of smaller section beams for weaving.Between the towers, strictly in the middle, you need to dig into the ground, vertical beams.They will perform the function of binding framework.

Fence braided

Fence braided

Step 4. Weave need to start from the bottom.The first board is passed through the timber, skirting it.The ends of the boards must overlap to lie on the supporting pillars.With current levels of fixed horizontal position of the first board, then it is fastened with screws to the posts.It is also recommended to fasten the board to the vertical beam.The second board is superimposed on the first, only bends in the opposite direction.Also fixed with screws.So going to the whole body.

wicker fence

Wicker fence

Step 5. When assembling the second web need to strictly ensure that the location of the boards completely coincided with the location of parts on the first web.

Step 6. Once the fence is ready, you need to process all of the elements or impregnating a covering paint.

Wicker fence with their hands from the boards

Wicker fence with their hands from the boards

Video - Erection of fence plank horizontal strapping