Build Daily

Latest

August 12, 2017 18:06

Air oven with his own hands

For the full arrangement doubles the owner should choose high-quality and efficient bannuyu oven.Fortunately, in today's market a huge selection of such units.However, not every owner of the bath there is a possibility or willingness to pay is not known to whom the money for what you can do yourself.

Air oven with his own hands

Air oven with his own hands

We are offering instructions for making several different metal furnaces.Some of them are going to literally from scrap materials to build the other you need to make a more substantial effort.Explore the options available, you select the appropriate furnace design and get to work.

Air oven with his own hands

Air oven with his own hands

to the bathhouse furnace requirements

Article Contents

  • 1 to the bathhouse furnace requirements
  • 2 compact stove for sauna
    • 2.1 first option
    • 2.2 second option
  • 3 furnace of the old wheel rims
  • 4 furnace of a metal pipe
    • 4.1 Video - Air oven with his own hands

With the right approach to the homemade bathoven anything will not

concede its analog factory production.

Stoves for baths Wood

Ovens for bathhouse Wood

When choosing the type of oven you need to take into account the key features of most baths.However, regardless of the selected type of the embodiment bath furnace must meet several basic requirements for any actual units of this type.

Air oven with his own hands

Air oven with his own hands

Among the most important requirements is necessary to note the following points:

  • availability of the required thermal power and possibilities for its regulation;
  • presence of steam and heat to the battery design.These devices allow to change the humidity and temperature regimes that make a visit to the steam room as comfortable as possible;
  • absence (in practice - the almost complete absence) surface is heated to a temperature above 150 degrees;
  • presence of possible regulation of convection.

In addition to these points, each of bath furnace put forward specific requirements in relation to the furnace dimensions, indicators of fire safety, etc..

Air oven made ​​of cast iron

Air furnace iron

Stoves for baths

Ovens for bathhouse

The furnace in the bath

furnace in the bath

The furnace in the bath

furnace in the bath

compact stove for sauna

Compact furnace for a bath

compact stove for sauna

The design of the furnace

design furnace

first option

The main advantage of this option - no need to purchase expensivematerials and ultimate ease of assembly.

basic structural elements of such furnaces are:

  • body of metal;
  • wall of brick;
  • fume collection tube;
  • water tank;
  • firebox;
  • grate made of cast iron;
  • stones.

At the bottom of the unit is equipped with a furnace at the top - mounted water tank.

Compact furnace for a bath

compact stove for sauna

first step. Cook furnace body sheet metal.Recommended material thickness - 0.5 cm

optimum dimensions of such a furnace -. 700h700h1600 mm.If necessary, change the size, count them proportionally.

second step. Put furnace furnace refractory bricks.masonry elements set on edge.

third step. overlaid brick stove.

How to impose a metal stove

As impose metal furnace

fourth step. Place the heater on the wall of the base of the stone.As the base, use angles, channels and other Rolling products.

Lay the base elements so that the gaps between them would normally leave the resulting gases.

fifth step.Make side door.Through it you will pour water on the rocks to create steam.

Driving iron furnace lining brick

Driving iron furnace lining brick

sixth step.Make tank required volume of water.The most common volume - 30 l.Equip the tank removable cover and fix it on the stove.

seventh step. Install fume collection tube, passing it through a water tank.The water in the tank will be heated with heat of the chimney.

To improve the efficiency of the furnace, it can impose a brick.

second option

The design of the furnace

furnace design

This oven is heated in the shortest possible time with minimum fuel consumption.

The structure of the furnace consists of the following elements:

  • metal body;
  • chimney;
  • firebox;
  • ash pit;
  • door for a couple.

Assembly Procedure does not differ from that considered earlier.You weld the housing of a metal sheet, set the side door, mount the chimney lining and perform basic structural elements of brick.obkladyvayut furnace walls in a half-brick.

Water and steam coming into this furnace through the side door.

furnace of the old wheel rims

The oven of the old wheel rims

furnace of the old wheel rims

hoops are used for the manufacture of such a furnace.The size is ideal rim from the vehicle ZIL-130 and similar vehicles.

you need to prepare two of the rim to the bottom, and the same amount of product without a bottom.Additionally prepare pipes, valves, the required number of bricks and so forth.

The oven of the old wheel rims

furnace of the old wheel rims

first step. Put the combustion chamber of the fired ceramic brick.The optimum size of fuel compartment - 620h620 mm.Laying furnaces perform at half brick using the traditional clay solution.

second step. Replace the furnace firebox welded construction of the two rims.Thus one should be a rim bottom and the other - without it.Boil the rims on the outer edge of a continuous suture.

third step. to the center above the rim weld pipe.Brew holes around the perimeter of the rim metal liners.

fourth step. to establish lower rim weld steel disc.He will perform the function of a reflector.For a more convenient fixing disk use metal rods.The disk itself must have a thickness of 0.5 cm, and its diameter is 12 cm inside diameter set to yield the rim.Better to be concave reflector.

The oven of the old wheel rims , door

furnace of the old wheel rims, door

fifth step.Weld bottom perimeter rim of the third metal rod 4.In the assembly of these rods will abut the 2nd rim.Brew third hole rim, except for the central, iron liners.To weld the central hole cover.

sixth step. Fill space with asbestos cord.

The oven of the old wheel rims , with their own hands

furnace of the old wheel rims, with their hands

Natural stones

Natural stones

seventh step. Fabricate steel divider.Divider Set 3-cm gap with respect to the rim.

eighth step. On the basis of the fourth rim fabricate water tank.Optimal tank capacity - 30-40 liters.

In the center of the boiler bottom hole cut and weld it to the pipe.To the top of the tube, attach a metal pad for base fume collection tube.Install the water tank ready for the 3rd rim, previously having equipped pad of asbestos cord and clay.

For convenience, the side mounted valve for hot water

For convenience, side mounted valve for hot water

ninth step. welded to the bottom of the boiler water pipe with a tap.Close the boiler suitable removable cover.

tenth step. Install fume collection tube.

Chimney

Chimney

furnace of a metal pipe

Very good bath furnace can be made of a metal pipe.

The furnace of the metal tube

furnace of a metal pipe

first step. meter Cut a piece of pipe for the manufacture of the heater.

second step. Cut a 70-inch piece of pipe for the water tank.

Homemade furnace of a metal tube

Homemade furnace of a metal pipe

From a piece of pipe making chamber stones

from a piece of pipe making chamber stones

Make oven bath from pipe

Make furnace for a bath out of the pipe

third step. Toward the bottom of the pipe to the stove, cut a hole the size of the ash-pit 6h20 cm.

fourth step. Weld metal plate to the upper edge of the ash-pit holes.

fifth step.Make in welded plate hole to lock the grate bars.

sixth step. Cut out the center of the pipe hole for the firebox.

The furnace for the bath of the pipe

furnace for a bath out of the pipe

seventh step. Weld curtains and locks for the doors.

The furnace for the bath of the pipe

furnace for a bath out of the pipe

eighth step.Above furnace fix by welding a pipe diameter of 300 mm, perpendicular to the wall of the combustion chamber.This will be the stove.

ninth step. Fill stove oven stones.

tenth step. Install pipe for exhaust fumes.

Almost ready from the oven pipe

almost ready from the oven pipe

eleventh step. about 15 cm above the heater, set the water tank with a crane and a removable cover.

twelfth step. Repair welding traces using the peeling range.

To further increase the heat transfer performance and security, can impose a brick oven for metalwork.

In determining the height of the chimney in mind that on the street, he has to rise above the roof not less than 50 cm.

Part fume collection pipe passing through floor, insulate with non-combustible material.

Before installing the bath is recommended to heat the oven several times on the street.This will allow the production of construction material to the desired shrinkage.

Set the oven

Set oven

Set the oven

Set oven

When installing the furnace in the bath to observe the elementary rules of fire safety.The oven must be installed on a non-combustible base.The minimum distance between the stove and walls - 30-50 cm (depending on the material of manufacture of the walls).On the floor in front of the furnace door of the furnace it is recommended to put a metal sheet.

If the wooden bath , then the furnace of the pipe is necessary to impose a brick

If wooden bath, then the furnace of the pipe is necessary to impose a brick

Follow these tips, and you without problems make the perfect stove for your bath.

The stove pipe from horizontal

The stove pipe from horizontal

Successful work!

Video - Air oven with his own hands