Build Daily

Latest

August 12, 2017 18:06

The ceiling in the kitchen with his hands

kitchen facilities are constantly subjected to high humidity and temperature changes.Most of all it affects the ceiling, since vapors and smoke and hot air rises.In order not to have to deal with every year renovation, do the ceiling in the kitchen with his hands should be taking into account these factors when choosing appropriate materials.

The ceiling in the kitchen with his hands

The ceiling in the kitchen with his hands

What ceilings are suitable for kitchen

Article Contents

  • 1 What ceilings are suitable for kitchen
  • 2 How to plaster and paint the ceiling
    • 2.1 Application of the plaster
    • 2.2 Fine finishing
    • 2.3 ceiling painting
  • 3 Mounting plastic ceiling
    • 3.1 preparatory stage
    • 3.2 frame Mounting
    • 3.3 Installing panels
    • 3.4 Video - The ceiling in the kitchen with his hands

The ceiling in the kitchen must withstand high and low temperature, water repellent, well laundered.Do not use flammable materials as well as materials with a porous surface.In addition, should take into account the pos

sibility of flooding from above and choose the design that could hold a large volume of water.Or on the contrary, to choose this type of ceiling, which is the easiest to recover.

Stretch ceilings in the kitchen

Stretch ceilings in the kitchen

easiest way - plastering and painting.Proshpaklevat and painted ceiling for a long time does not lose the original look, does not warp when exposed to moisture, is not afraid to fluctuations in temperature and can be easily cleaned.If there was a water leak from the top, the damaged area can be restored in a few hours.And paint and putty are quite affordable, and all the trimmings can be performed independently.

The ceiling is painted with dark pink paint

ceiling painted dark pink paint

Plastic panels are considered to be a viable option for the kitchen ceiling.They do not burn, have a very low hygroscopicity, easy to wash.To avoid distortion from high temperatures to fix the panels to be movable fasteners - klyaymerami.Preference is better to give a seamless panels with a glossy finish, which accumulates less soot and dust.In addition, the plastic ceiling is not afraid of flooding: the water hardly penetrates tight joints, and follows on the design corners.

Rack suspended ceilings in the kitchen

Rack suspended ceilings in the kitchen

Stretch ceilings made of PVC film is also an excellent choice for kitchens.They look great, moisture and heat are not afraid, easily laundered, and most importantly, keep the water in case of flooding.You have this coverage and minuses: the film can be easily damaged by any sharp object, the value of the web is high enough to perform the installation will fail.

PVC stretch ceiling in the kitchen

PVC stretch ceiling in the kitchen

Construction of plasterboard are only suitable for spacious kitchens with high-quality exhaust system.Water-resistant drywall after spackling and painting can be cleaned with water, it does not burn and does not emit harmful fumes.But in case of flooding the entire structure would have completely changed, and the presence of ridges and angles in the ceiling contributes to the accumulation of soot and dust.

Ceilings of plasterboard in the kitchen will allow you to install absolutely any lighting

Ceilings of plasterboard in the kitchen will allow you to install any lighting absolutely

How to plaster and paint the ceiling

to yourself to finish the ceiling with the help of plaster, you must first prepare the surface well.To do this, completely remove the old paint, clean corners and joints between slabs.All visible cracks overwritten putty, cement mortar used for deep gaps.

Preparing the ceiling

Preparation ceiling

seams between the plates is filled with filler and cover the reinforcing tape.After this rough ceiling and wiped dust cover primer mixture.

Preparing the ceiling

Preparation ceiling

plaster Application

In the process of finishing required:

  • dry plaster;

    Dry plaster

    Dry plaster

  • mixing well;
  • water;
  • aluminum profiles for beacons;
  • water level;
  • rule;
  • spatula width of 15-20 cm;
  • finishing coat;
  • synthetic mesh reinforcement;
  • sander.

This method is suitable for ceilings with differences in height no more than 5 cm. Beacons used if the surface is too rough, and similar work experience minimal.The thickness of the plaster layer should not exceed 5 cm, and the applied solution is the best of 2-3 thin layers.Thus, if large irregularities on the ceiling, with a water level determined by the lowest point, and back down to 10 mm dishes at discourage line marking the perimeter.Focusing on the line, the ceiling fixed beacons profiles spaced 20 cm less than the length of the rule.

Mixing plaster mixture

Mixing plaster mixture

Mixing Mixing plaster plaster mixture

Mixing plaster mixture

According to the instructions and mix the plaster is applied to it on the ceiling between the beacons.Surplus remove the rule, making zig-zag movement along the profile.If the substrate is smooth enough one layer of plaster, and if defects are still visible, a second coat is required.To do this, between the lighthouses in wet plaster pressed reinforcing mesh, overlapping joints of 10-15 cm. Further plastering is performed after drying of the first layer.

Installation beacon

Installation Beacon

Plaster ceiling beacons

Plaster ceiling beacons

Align the ceiling rule

Alignment ceiling rule

The grid for the second layer

grid for the second layer

Finishing plaster and putty

Finishing plaster and putty

Fine finishing

When the ceiling is dry, mix the plaster finish and distribute it across the surface of a wide spatula.Filler layer should be as thin as possible to put it again, if necessary.At the end of the kitchen ceiling is processed sander or special mesh.The resulting dust and wipe clean with a slightly damp cloth.

ceiling painting

Paint preparation

ceiling Painting

ceiling painting

Kitchen best latex or silicone gloss paint.You can take and matte, which perfectly conceals flaws, but soot and grease from the surface of the mat wash more difficult.For coloring take paint brush or roller, as someone comfortable.White or bright paint applied in a single layer, but paint a darker shade better apply two layers, so as not shone plaster.At the finish of the kitchen ceiling shall be deemed terminated.

ceiling Painting

ceiling painting

Mounting plastic ceiling

Plastic ceiling in the kitchen

plastic ceiling in the kitchen

To manually mount the ceiling will need:

Ceiling Panel

Panel Ceiling

  • glossy plastic panels 250 mm wide;
  • wooden slats 20x40 mm;
  • aluminum U-shaped fasteners;
  • plastic dowels and screws;
  • staple gun;
  • screwdriver;
  • hammer;
  • hacksaw;
  • water level;
  • pencil;
  • sharp knife.

preparatory stage

When installing a suspended ceiling leveling base is not necessary, but remove the old paint and treat the surface of the mold is still necessary.If the ceiling was painted, and the paint is holding up well, simply primed base.

Priming the ceiling with his hands

Priming the ceiling with his hands

All existing cracks necessarily embedded putty, foam or grout, and carefully check the joints between the ceiling and the walls.The primer used antiseptic to prevent mold from the ceiling design.

frame Mounting

Performing markup

Performing markup

Mounting frame

frame Mounting

Determine the lowest point of the ceiling and using the water level is performed by marking the perimeter of the kitchen.From the line of retreat down 2.5 cm and secure the rack is strictly horizontal.Now on the ceiling to fix aluminum fasteners.According kitchen width between fasteners shall be at least 60 cm, 40-50 cm in length. If the distance is increased, the panel will sag.U-shaped elements are fixed on a concrete ceiling using dowels, screws screwed on wood.

Next comes the turn of rails: they are applied to fasteners, put on a level and fix the short screws.All the frame rail should be placed in parallel rows.In places where the sewer pipes stuffed additional rail bypass pipeline.If the plastic is touching hot pipes, it oplavitsya, so between the edges of the panels and the metal needs air gap.

Installing panels

Installation of plastic panels on the ceiling

installation of plastic panels on the ceiling

panel length must be less than the distance between 5 mm walls.If the ceiling has ridges in the panels pre-made cutouts for them the appropriate configuration.In the kitchen, a ceiling is most often installed without the plastic profiles and joints in the closed perimeter of the usual baguette.In this case, the first panel is attached directly to the rail on the wall with screws.All other assembled using locking system: lining edge is inserted into the side slot of the previous and snapped abruptly.

Mounting panels

Mounting panels

To install the last panel, you must first measure the distance between the penultimate board and the wall, as it often does not match the width of the lining.Measurements do 6-7 points along the wall, because not every wall is perfectly flat.Thereafter, measurements and transferred to the panel with a sharp knife cut the excess.Fastening screws operate short, as in the beginning of installation.Finally, on the perimeter of the ceiling is glued decorative moldings.If some seams on the ceiling fitting is loose, they gently obscure the putty.If necessary, any panel can be easily replaced by new;if you need a complete replacement of the ceiling, leave the same frame, which significantly simplifies and reduces the cost of repairs.

The principle of making holes without a crown

making holes principle without crown

Installing lighting fixtures

lighting fittings

These methods are the most practical and easily implemented.For these ceilings easy to care for, they keep their attractive appearance.Of course, much depends on the intensity of use of the kitchen and drawing quality.The smaller evaporation, the less impact on ceiling cover, and vice versa.

Video - The ceiling in the kitchen with his hands