Build Daily

August 12, 2017 18:07

Pavilions for pools : variety , shape , design

owners of public pools are facing a number of challenges, among which are the fast contamination disposition of the water and short swimming season. it possible to exploit the long-term water body, while reducing cleaning costs and heating water?Yes, you can, and help in the pavilions for pools.Today, the site of "Dream House", you will learn what materials are made protective covers for swimming pools, what are they and why do we need.

Pavilion to the roof of the house to the pool

Pavilion to the roof of the house to the pool

What pavilion

Basin As mentioned above, a pavilion for the pool - this is a protective coating, something like a dome that sits above the water.They can be of different shapes and heights, even structural features of different models are different.On the forms of the pavilions will be discussed later, but for now, let's define the benefits of having such a construction on the site.We counted eight advantages, but in fact there may be more.

  • Firstly, pavilion protects the pool from various debris, such as leaves, gras
    s, dust, insects.
  • Secondly, protects the pool from precipitation at each loss which increases the pH level of the water.
  • Third, keeps the water warm for a long time, extending the swimming season by several months.
  • Fourth, due to the low thermal conductivity of the material from which made a protective pavilion, reduced water heating costs.
  • Fifth, the coexistence of deep pools and small children is harmless, as the pavilion can fully close the pool and the baby will not fall into it.
  • Sixth, reduces the cost of cleaning debris from the pool.
  • Seventh, makes it possible to use the pool all year round.
  • Eighth, rain or hail - not a hindrance to bathing in the pool.
Pavilions for pools photo

Pavilions for pools photo

As you can see, the dignity of the protective coating to justify its existence, and if you previously only thought about this acquisition, it now just need to make it.Almost all the advantages required to design the pavilion and the material from which it is made.As skeleton using lightweight and durable aluminum, and use any organic glass or polycarbonate (second material is used more often), wall and ceiling.Due to the fact that it has low thermal conductivity, the water in the pool cools down more slowly, so it is possible to swim in all year round, though, of course, pre-organized inside the pavilion polycarbonate heating.

Types pavilions for pools

All protective coatings can be divided into two large groups, is:

  • telescopic (sliding);
  • stationary.
Pavilion stationary pool

Pavilion stationary pool

Sliding pavilion for the pool

Sliding pavilion

pool Judging from the name already, you can guess that the sliding pavilion for the pool is a structure having a section that can be moved, freeing up to sunlight the whole poolor some portion thereof.Most of these sections have a semi-circular (arcuate) shape.Their height may be from 0.7 to 3.5 m, and is controlled by a shift toward individual sections.If we talk about the pavilion for round pool, the sliding system will look like a dome and allow sunlight to open more than 1/3 of the roof.

Stationary pavilions also have the ability to open several panels for ventilation, these pavilions can be compared with an indoor pool.As you can imagine, they are not only fulfill a protective function, but also serve as a great place for the whole family.If this winter pavilion conduct heating, then you can swim all winter pool.And if you make a design for the basin limits and move up close to the house, you get something like a winter garden.

As for the height of the frame, it may be small, while carrying out only a protective function - in functionality can be compared to a tent for the pool.But it may also be up to 3.5 meters, turning into a full-fledged resort.mobile pavilion for the pool allows high frame resting on it to move in all growth without much discomfort, in an open section to watch the world go by, as well as sunbathing.

forms and pavilions design

Pavilion telescopic pool

Pavilion telescopic pool

Pavilion for round pool

Pavilion for round pool

Beautiful photos Pavilions for pools

Beautiful pavlony pool photo

Finally, we reached the most interesting in the description of these canopies - NowWe talk about the shape and design of pavilions.They can be installed on any type and shape of the pool.Most often, buy a pavilion for frame pools, because this type of body of water is the most common.

What kind of a fancy curved shapes of frame structures do not have to wait, but the variety is still there:

  • The simplest and most accessible form - in the form of an arch.The maximum construction height is 3.5 m, so that it can be used not only to protect the water of debris, but also as a recreational area.
  • next version more interesting - he has one side straight wall, and a second curved arc and passes the roof.Along the straight and high walls can be arranged seating area, put a table and a chaise longue.The maximum height of this part of the 3.5 m, and the width of all of the pavilion can range from 5 to 9 m.
  • And the third option is a semi-vertical walls and an arched roof.This is the most spacious hall, which allows access to the water on all four sides.This design belongs to the pavilions of the premium.

How to make a pavilion for the polycarbonate

pool with their hands in principle, make the pavilion a little harder than usual shed or greenhouse polycarbonate, but the handyman, this work will be on the shoulder.In order to build a pavilion for the pool with your own hands, you will need:

  • profiled tube of square or rectangular cross-section;
  • polycarbonate sheets;
  • welding machine;
  • fasteners.

first going to the support frame of the pavilion.The main support posts are concreted into the ground to a depth of 0.5m.These welding using roof-mounted structure, which is a series of guides for polycarbonate interconnected ribs.Polycarbonate is mounted just - it is placed on the roof and fastened with special screws to press the puck.To cap screws did not stand out, they can paint paint.

uses a special profile, which allows you to connect the junction invisible polycarbonate sheets.Along the perimeter of the roof made of polycarbonate is enclosed in a special profile, which is called "starter strip."More on carcass construction stage should be to lay the opening, which later set up the doors, made of shaped tube and polycarbonate.

for ventilation can be provided a sliding roof or folding sidewalls.The sliding roof will require the creation of a double frame, which is connected to each other by means of rollers and guides.When it comes to folding sidewalls, they are working on the principle of the door and attached to the roof using awnings.For their opening will need additional support or special mechanism composed of pulleys and ropes.

As you can see, pavilions can not only buy ready-made for swimming pools, but also to make their own.But if you are not confident in their abilities, then for greater reliability it is better to entrust the installation of the professionals in this field.Still, this design is not for one year, so that it should not only be reliable and durable, but also safe.


Toilet in the country with their own hands: the stages of construction, materials for house and finish toilets
Holiday gazebos with their hands: how to build a gazebo, stone
Suburban washbasin: species, form, functionality
garden mazes on the site: a fairy tale involving adults
scarecrow: crop protector and garden decoration