Build Daily

August 12, 2017 18:07

What cable to choose to connect the outlets ?

Before attempting to install wiring in the house, you need to properly calculate the cable cross-section at the outlet, and light switches.In addition, you need to get serious about the choice of the brand of cable products, asin a wooden house insulation must be non-combustible and can be used a normal conductor in the apartment.Then we'll show you how to use the cable for outlets, relying on the rules of the SAE and other important factors.

Let's start with the fact that according to modern requirements for socket cable must be copper, be sure to ground (ie, three-wire or five-wire) and a section of not less than 1.5 mm2 in accordance with the SAE Table 7.1.1:

Table 7.1.1

Here it should be clarified that under the group network means the line of boards to sockets, lighting and other electric receivers.

It is now a little clearer what cable to use for mounting the female line power at 220 volts.Here it should be noted that the blaze from the junction box to the cable outlet section of 1.5 mm2 is not advisab

le, becauseIn this case, connect the appliance to the powerful it will not work, if required.It is better to take a single-phase section with a margin - 2.5 mm2.

Three copper wires

With regard to the three-phase wiring, there is already the case may be different, becausewith section of 1.5 mm2 five-wire cable can withstand a load of 10.5 kW, according to the table:

Maximum power for 1.5 mm.kv.network 380 volts

This is enough to connect to powerful electrical outlet used in the home.However, experience shows that even in a network with a voltage of 380 volt conductor take with a reserve, namely, 2.5 mm2.

Maximum power for 2.5 mm.kv.network 380 volts

Five lived

C of conductors sorted thick, now let's talk about the other, not less important question - what type and brand of wire pick.The fact is that today there are many fakes, the use of which may cause ignition wiring.The same wire SPAP dangerous power tools.We recommend to use the outlets of the brand VVG cable VVGng or NYM.

If you want to spend the wiring for the female group in the apartment or private home, choose the brand VVG enough.In fire-hazardous areas, for example, in a wooden house, be sure to recommend the use of sockets VVGng cable or a more expensive import analogue - NYM.

That's all that I wanted to tell you on this issue.To consolidate the material provided, we have decided to summarize and again specify which cable brand and cross-section is better used for outlets in different cases:

  • to connect the washing machine, TV and others are not very powerful electrical household appliances - VVG 3 * 2.5 mm2.
  • to connect powerful devices in the three-phase network (for example, if the garage is necessary to connect the pump to the powerful 380 volt or three-phase plate in the kitchen) - VVG 5 * 2.5 mm2.
  • socket group in a wooden house - VVGng 3 * 2.5 mm2.
  • If you are 100% sure that the socket will be used solely for the lamp power supply or other low power devices can draw a conductor cross section of 3 * 1.5 mm2.

Finally recommend useful view related videos:
YouTube Preview

Now you know what kind of cable outlets to choose the cross section and the title.If you liked the article, please share useful information with your friends on social networks!