Build Daily

August 12, 2017 18:07

Building a garage with his hands from the foam block - the possibility of using advanced technology

How to design an object and calculate the concrete blocks on the garage at the beginning of

Construction should always start with the design process.Explore the terrain, which are going to build a building, to vote its relief and the level of groundwater.Alone or with the help of experts, develop and draw a design of the future building.Also, find out how to calculate the concrete blocks on the garage to avoid unnecessary investment funds.And remember that the amount of material needed will depend directly on what size you need garage, and what features it has, in your opinion, to perform.

How to design an object and calculate the concrete blocks on the garage at the beginning of

Building a garage of foam blocks with their hands: marking territory and installation of foundation

Further speaking about how to build a garage of foam concrete blocks, it is important to highlight such things as marking territory and installation of the foundation.After all, the strength of the basic design will largely depend on the future performance of the facilities.

Building a garage of foam blocks with their hands : marking territory and installation of foundation

The layout is performed by sm

all pegs between which stretched monofilament thread.Moreover, it is important that the yarn formed an angle of 90 degrees.And when everything is ready, you can proceed directly to the installation of the foundation, the type and characteristics of the installation is dependent on the type of soil (because of aerated concrete blocks are light enough and can be installed on any foundation).

installation of garage doors, as one of the most important stages of the construction process

Often people who are interested in how to build a garage of foam blocks, do not know that immediately after the arrangement of the foundation should move to install the gate.The door must be here even before the walls, because then will be build into them.

Installing the garage door , as one of the most important stages of the construction process

waterproofing the foundation around the perimeter using roofing, install gates and weld them to the frame reinforcement bars with diameter 10 - 12 mm.The bars must be placed precisely in the joints of the individual foam blocks, and just before you install them you need to paint.

build garage with his hands from the foam block: laying material

begin the erection of walls with angles necessary.And you have to take care that the thickness of each wall is about 200 mm.It is necessary to think, even deciding on which foam block to the garage to pick a niche market - guided by its width.

Building a garage with his hands from the foam block : laying material

using for bonding special glue foam blocks or, in extreme cases, the cement-sand mortar, carefully set the design angle.Pull the cord between them - this measure will help every person, not knowing very well how to build a garage of foam blocks, and to doubt their abilities to act correctly and clearly.And then just alternate masonry walls and corners, not forgetting every two rows of material to lay a layer of reinforcing mesh.

Installation of the roof and the floor arrangement as the final stages of construction

roof of your garage can be a pent or gabled.And the first option is more simple and involves the following actions:

  • install I-beams across the walls of buildings;
  • mounting beams wooden planks;
  • laying of roofing material;
  • blow dry insulation material;
  • perform screed of concrete mix;
  • treatment of dry screed primer;
  • waterproofing roofing material;
  • installation canopy over the gate.

Installation of the roof and the floor arrangement , as the final stages of construction

Well, the last thing a person needs to know who is interested in how to make a garage out of foam blocks, it is the specificity of the floor design.It should be very strong, and therefore is made of concrete.And immediately before concrete pouring it is important to lay layers of crushed stone, sand and gravel.And in a pedestrian area it is advisable to make the floor of the wood.And when construction will be completely ready, they are already allowed to use.

Installation of the roof and the floor arrangement , as the final stages of construction