Build Daily

Latest

August 12, 2017 18:07

How to sheathe skin

For plating furniture

In order to begin work on leather trim upholstered furniture, it is necessary to prepare a number of tools and materials:

  • tools that are needed for disassembly of furniture component parts.
  • material for stuffing.
  • skin.
  • Tools for pattern: pencil, paper pattern, a knife.
  • hammer for joints.For these purposes can use a hammer and gauze.
  • threads and sewing machine.
  • adhesive tape.
  • few pins.
  • Braid.
  • Cotton swab and vegetable oil.
  • Stapler.
  • nails and a hammer.

As they cover the leather furniture:

Action Plan Work on furniture trim skin consists of several turn-based events:

  • Analysis furniture components.
  • Disconnect the old upholstery.
  • Pattern elements upholstery.
  • Staple a cut parts.
  • process of hauling furniture.

cording, furniture leather: step by step instructions.

Step 1: Prepare the furniture to the waist

Using predefined tools necessary to disassemble a piece of furniture into its component parts.Separate headrests and armrests.

Step 1: Prepare the furniture to the waist

Step 2: cleaning the surface of the chair, the bed, the couch of the old upholstery

The following unpick the old upholstery and check the quality of the material, which is packed full of furniture inside.In the data stage, it is possible to replace the loose pieces of upholstery with new ones.Most often used for these purposes dense foam.

Step 2 : cleaning the surface of the chair , the bed , the couch of the old upholstery

Step 3: Making the pattern stitched

Using the resulting analysis, parts of furniture make the process patterns.This is a very important step because it will determine how accurately carved leather items to fit furniture in the skin.The irregular shape or size of the pattern parts can cause damage and increased material costs for the work.

Step 3 : Making the pattern stitched

Step 4: sew the finished leather upholstery for sofas, chairs and other furniture

Next, you need to make the process of stitching a cut elements, adhering to certain rules:

  • impossible to baste a cut thread details.For this purpose, it is best to use masking tape.You can also use the pins, but see to it that they are attached right on the seam line.
  • The area where the foot of the sewing machine will touch the skin, lubricate it with vegetable oil.Thus the material will slide better during crosslinking.
  • allowances worth sticking to the wrong side of the adhesive material to work with leather.
  • seams as possible, you can attach a decorative braid.

Step 5: bring to perfection furniture, leather-bound

overtighten the furniture should be carefully and attentively.It is necessary to eliminate the appearance of wrinkles on the smallest material.Also, you should avoid the situation of free material, so that it does not sag.After the end of the constriction need to put the pieces of furniture together.

Step 5 : bring to perfection furniture, leather-bound

Thus, the article has been described and characterized the process of hauling furniture leather material.