Build Daily

Latest

August 31, 2016 23:00

How to remove grease stains on the door

How to wash stains from the door: the painted surface

How to remove stains on the door : the metal surface

Spot fat with colored doors is easy to clean.We must act, depending on what kind of prescription pollution.Fresh stains rubbed with hot water and dishwashing detergent.And if we are talking about is an old spot, you need vinegar.To remove stains, wipe it with cotton wool soaked in vinegar and allow it to fully absorb.Then wash the surface of the detergent and a soft cloth.

How to remove stains on the door: the metal surface

How to remove stains on the door : the metal surface

To remove greasy dirt from metal surfaces they should be wiped with acetone or white spirit, which can be found at home or at the nearest supermarket building.Good results showing contamination cleaning agent containing abrasive particles used in the household, such as cleaning powder for the kitchen.

How to remove grease stains on the doors: unpainted surface

stains unpainted wooden door removed with a mixture of clay and vinegar, which is stirred until smooth and applied to the pollution.After the mixture w

as completely dry, it is washed off with warm water.

How to remove grease stains from the interior doors with polished surface

How to remove grease stains from the interior doors with polished surface

To remove dirt from the polished door it must be treated with talc.If such was not available, suitable raw potatoes, cut in half.Door treated talc or potatoes, leave for 15-20 minutes, then wipe with a damp cloth.

If, after such a treatment on the surface formed divorces, the door can be polished using flour and soft cloth, pre-moistened with a small amount of vegetable oil.

How to remove stains from the lacquered doors

How to remove stains from the lacquered doors

If interior door, varnished, a large number of greasy stains and scuffs, then to return to her original appearance, the door must be re-lacquering.Make it is not difficult.

first step is to remove the door from its hinges and put on a prepared flat surface.Once the door is already, you need to remove all the handles, hinges and bolts.

Follow the previous steps, you can safely proceed to the removal of the old varnish.You can do this in several ways:

  1. special equipment for removing varnish from wood (remover);
  2. mechanical method;
  3. Heat.

The easiest way to be the first using a special wash.To work recommended in 4 stages:

  1. brush we put a wash on the surface.This should be done carefully, holding a brush in one direction.
  2. Creating compress.To enhance the effect of washing, the surface should be wrapped in foil.And leave in such a state until the remover will not get brown or dark brown in color, usually the process takes from 40 minutes to 4 hours.
  3. Removers.This should be done depending on the thickness of the lacquer or spatula, or sandpaper.
  4. neutralization washes.Once work on the removal of varnish is completed, it is necessary to wash away the remnants of water and vinegar.

When the door is cleaned of old paint, and, consequently, of all grease, it must be sanded with sandpaper.And a brush to remove all dust and debris.

How to remove stains from the lacquered doors

At the door to the preparation of the coating lacquer is completed.It is possible with the help of a broad brush to apply paint to the door.This must be done uniformly and in one direction.And depending on the desired tone, the layers can be applied from 1 to 3.