Build Daily

Latest

August 29, 2016 23:00

How to align the wall angle

Content

  • 1 How and what to equate?
    • 1.1 Gypsum method
    • 1.2 Wet plaster
  • 2 directly on the breeding angles
  • 3 plaster corners
  • 4 Conclusion
    • 4.1 Two video on angles vyrovnivaniyu

Plaster angles alignment angle - this is the final stage of finishing the wall surface, before its final, finishing.The process is quite complicated and time-consuming, but it can do and its complexity rukami.Glavnaya launch angle with your hands, is that there is a clear need to achieve compliance in the 90C.On the other hand, the question as to whether the angle needed shirokogranny 90C.It is not always necessary to clear excretion.For example, if you have at this point will hang the carpet, a deviation of a few degrees will completely unnoticed.But the installation of modern, stylized furniture, even half a degree of deviation is evident.But that does not mean you can leave everything as it is and does not deal with this problem.

How and what to equate?

How to align the corner of the wall plaster?- There

are two possible answers to this question: through drywall or wet plaster.Consider options for addressing this issue.

Gypsum method

main advantage of drywall is that its surface is almost perfectly flat.even the most difficult corners can be aligned using this element.In addition, the sheets are mounted on pre-prepared skeleton of aluminum profiles, so you can hide the curvature and roughness of the walls in a fairly wide range, up to 10 cm!On the question of how to align the inner corner of the wall, the best thing you can answer the master working with plasterboard is not the first year.
Speaking of shortcomings, they are in the subsequent coating and alignment of joints.In addition, the corners will have to display manually, but doing it on a flat surface, is much easier.

gypsum method

Gypsum method

Wet plaster

Plastering - how to align the angles of the walls by means of plaster, everyone knows.This method is known to our households for many decades.Among the disadvantages of large quantities of dirt, physical and time costs, plaster has a huge advantage.The fact that it is ideal for alignment angles in the case of small height variations.Also in contrast to drywall, it will help to save valuable space in the room.

Instruments
Widget from SocialMart

directly on the breeding angles

Wet plaster

Wet plaster

most practical and rational way corner alignment in a small apartment, yet is to use the second method.Plaster wall corners with their hands begins with the pre-treatment of the old wall.
main provisions:
• with a plumb and level, fitted as close to the value of 90 ° C;
• In order not to spoil the interior angle derived in plaster, pre-paste over the corners of a special tape that will fix the value obtained, and to strengthen the design itself;
• After work place has been carefully prepared, and the angle displayed, proceed directly to the plaster and putty.

Apply a layer of the mixture must be carefully and evenly, avoiding unevenness.In the treatment of permanent use level, and in case of deviation find - immediately align them until the material is dry and has not lost elasticity.

can use special profile, if you do decide to resort to the method of Plasterboard.Corner profile is attached to the corner of the surface and then trimmed and processed (priming, plastering, plaster).Profile will not only bring a flat angle, but also to strengthen it.After the drywall, the material is very fragile, and in the absence of fortification elements can give a cracked or chipped at the slightest mechanical contact.

corners Stucco

How plaster wall corners with no errors?In fact, how plaster step will be carried out correctly, and will depend on aesthetic component, and the service life of treated structure.In order to hold the plaster properly denote major mistake that many beginners:
Start works without the prior analysis.In this case it is carried out on the assessment base, determining the material.If you picked up the wrong building components that can not be combined with a material base in the future you will have to take care not only about the angles of breeding, but also on the wall, eliminating cracks and bruises.

sure to attach the wall angle that would determine the angle.Then put the rule to the level, it will help identify the rubble wall.

so you determine what kind of materials to use, plaster or stucco shpaklёvku.Nanesenie without primer: in this case, after the drying of the surface layer on the slopes and contours of the corners will appear blocks, panels and bricks.

Conclusion

And so, how to make a smooth corner wall plaster or plasterboard?The first step is to bring them up with the help of levels and plumb lines.Then align by rough finishing, strengthen tape or profiles, and only then can begin to surface treatment with plaster and putty.But, before the grout is required to process the surface of the soil mixture.Now you know how to align the outer and inner corners of the room.

Two video on angles vyrovnivaniyu