Build Daily


August 12, 2017 18:08

Is it possible to apply putty to paint ?


  • 1 latex paint
  • 2 Enamel
  • 3 Conclusion

question applying putty on the painted surface is sufficiently relevant.But do not rush to pluck and paint on the walls and ceilings.First, excess dust and mess anybody else did not bring pleasure, and secondly, this paint can have a positive impact on the duration of the construction operation.This article will answer the question: what kind of paint will fall coat?

latex paint

How to apply the plaster on the painted wall

How to apply putty on the painted wall?

Before you know whether it is possible to apply putty to paint, you need to determine what kind of material you are dealing with.There is a fairly simple and proven method.First, you need to put on the surface layer of warm water, then make sure the reaction.If the paint begins to foam and washed out - it vodoemulsionku.Is it possible to apply the plaster on the water-based paint?- An unambiguous answer, NO!

Why can not leave the water-based paint?The fact that it pulls moisture contained in the prepared material for

putty.As a result, over time, it is simply just disappear.


Leave a colorant can be in the event that it is the enamel, created on the basis of a solvent-free water.As an example, the paint made based varnish.But in this case, there are exceptions.Even enamel based on non-aqueous solvents may not be appropriate under the plaster.The reasons for this may be different: poor quality, violation of manufacturing technology, incorrect application, etc.
In order to find out whether it is possible to apply putty to paint of this type, use a spatula.Spend angle tool on the surface of parallel lines at a distance of the main elements of the spatula.Then, slide it in the direction traced strips.In the case when the material begins to flake or crumble, it is impossible to leave.But if you hardly even managed to draw a guide - this paint is not just possible, but you need to leave.

Widget from SocialMart
How putty colored walls ?

How putty colored walls?

If the question is whether it is possible to apply paint on putty resolved in a positive way, it's time to proceed directly to work.
Very often happens, especially in older homes that remove paint just not realistic!During construction, the finishing facilities have spared no effort or materials.Therefore, the paint layer can be up to very large sizes.Over time, little has changed, the repair work carried out in the flats on the basis of new things, without having to remove the old layer of paint, etc.As a result, the ink layer could reach up to 10 mm!

In order not to suffer, and to accelerate the process of finishing, use a specialized primer "Betonokontaktom".The material is produced on the basis of acrylic, having a high level of fastening capacity.The entire structure of this component:
• Acrylic;
• Cement;
• Specialized fillers;
• Sand.

special fillers, which are mentioned above, gives this material adheres properties, prolonging the maintenance period."Betonkontak 'ideal for surfaces having a low moisture absorbing ability:
• Monolithic wall;
• Concrete blocks;
• Ceilings.

No matter how strong was the paint, use betonkontakta recommended by many experts and specialists in the field of building subjects.In addition, when using betonkontakta, the question whether it is possible to putty the walls without plaster, removed itself.This component works fine with the protection of the foundations of the excess moisture.After all plastering is necessary to not only flatten the surface, but also to protect their internal layers from moisture.


Even with low quality paint, the use of "Betonkontakta" will avoid a lot of rough work.On the other hand, the cost is quite high, so if you have time, do not regret it, and in the case of the presence of low-grade coloring material on the old walls, it is better to get rid of him.