Build Daily

August 12, 2017 18:08

How to glue the ceiling moldings , cut the fillet corners correctly

Content

  • 1 How to glue the ceiling moldings
  • 2 How else do the installation ceiling moldings
  • 3 How to cut the corner ceiling fillets inside and outside with photos

How to glue the ceiling moldings correctly you want to cutand sticking to the ceiling moldings properly, but do not know how to do it?At first glance it does not seem difficult, but if we consider more detail, it's not so easy.The picture below shows how to cut and paste the inner and outer angle for ceiling moldings (fillets).All instruction is painted in stages in an understandable form, with examples.

Ceiling skirting usually do when you need to close the gaps between the ceiling and the wall decoration materials.For example, you decide to pokleit wallpaper, and the farther along the wall, the greater the wider the gap between the ceiling and wallpaper.I know one person with whom there was such a situation, he did not listen to experienced people and in the end result was what he least wanted.And he had to run to the nearest store and buy a fillet.

How to glue the ceiling moldings

So let's start.To begin, measure the perimeter of the room footage and determine how much you need to fillet.The length is usually standard 2 meters.But it's best to buy a stock, just in case.It will also determine the width of which is right for you.They can be glued to the wall in various ways.First method: on a special plaster or acrylic (before wallpapering).And the second: once at the wallpaper on the sealant.

Most prefer to attach directly to the wallpaper.We recommend as an alternative to the adhesive silicone sealant it is perfect for this raboty.Proizvoditel serves no particular significance.Everything will be fine hold.But this method, even for those who have curves of the walls, as between a wall and fillets can be formed cracks, they will need to gloss over the same sealant.He is white, so will be more or less normal.

It is desirable to align the wall.Master advises to glue on plaster ceiling moldings, ie before pasting wallpaper.Thus cracks are sealed by putty.And accordingly to customize the wallpaper by the fillet.This option will suit more experienced.

Basically masters prefer to glue the foam moldings on white acrylic sealant can be easily applied, it keeps well and dries quickly. Its main feature they can plug the gaps, angles, and it is well painted .acrylic sealant cost within 100 rubles.and there is not much point in buying expensive.

In general, each decides for himself which method he used.

How else do the installation ceiling moldings

begin with the room.And this is where the problems can start.At first glance, it seems that make the angle ceiling moldings simply believe it is not.You can buy ready-made corners in the store, they are sold with the fillets.If you can not find, then you will have to cut corners.

Cut need with the help of such tools: miter box, a hacksaw, a sharp knife .Insert a piece of material in a miter box 45-degree angle and press tightly.It now remains at the right angle and with the right hand cut ceiling moldings.Now let's look in more detail how to do it with photo examples.

How to cut the corner ceiling fillets inside and outside with photos

thus cut the plinth, if you want to get outside corner.

How to cut the outer corner of the ceiling moldings photo How to cut the outer corner of the ceiling moldings photo

The result obtained here are the fillet edge.

Instruments
Widget from SocialMart

How to cut corners ceiling moldings external photo How to cut corners ceiling moldings external photo

then the inner corner.Pay attention, but then, what angle and what side you need to miter box to cut the ceiling moldings.

How to cut inside corners ceiling moldings How to cut inside corners ceiling moldings

That's what happened in the end, after cutting and pasting on the wall ...

How to cut inside corners photo How to cut inside corners photo fillets

Website renovated apartment with his hands advises to start to practice on pieces if everything will turn out, then forward the cause, cutinternal and external angles.

If you do everything right, then cut the first corner turned.Two corner can be glued to the wall skirting.If you have chosen a way to glue on the wallpaper, then promazhte fillet glue and attach tightly to the wall.Residues of glue can be removed with a soft cloth.Also seal the gap between the wall with glue.

If you have chosen to mount the ceiling skirting to wallpapering, they must be fastened by means of putty.Fillers apply a fillet with a spatula.And attach tightly to the wall.Remove the remains of a spatula or a wet cloth.The slots can also be drying gloss over shpaklevkoy.Posle plinth painted twice and you can start wallpapering.

Well, ready internal and external angle?So installation of fillets you're doing right.Now take the next bar, and in the same way to mount on the wall and baseboard glued nezabudte lubricate the joint angle.When proceed to the next corner, then carefully measure out the distance that is left, and cut the missing part, everything has to be very accurate.Will remain unchanged side that is joint to joint with a skirting board.So cut out every corner.When everything is glued, then they can be to paint the ceiling color.Good luck gentlemen, and remember that you need to cut after determining the exact size.

Video tips to help you stick ceiling moldings