Build Daily

Latest

August 12, 2017 18:08

Produce your own kitchen - it's real

Content

  • 1 What material do
  • 2 Recommendations on independent manufacturing of kitchen furniture
  • 3 How to restore old furniture

rhythm of modern life requires that the home was not onlybeautiful, but also functional.Design washing machine washing, dishwasher soap is good, coffee quickly cooked delicious coffee and so on.We all know that everything beautiful and multifunctional costs a lot of money.This applies to the modern fitted kitchen.The modern and high quality kitchen sets will cost dearly.Although for many the concept of "cheap" has different limits for the average family with average income it is not affordable.Recently, very important to make the kitchen furniture with their hands on the schemes developed their own ideas or found in other sources.

What material do

to the kitchen was strong and lasts a long time is necessary to choose the material of which it is composed.The base frame or any object interior furniture is made of chipboard.It is better to look for the mater

ial manufactured in Europe, its density is several times higher than the domestic producers of goods, is composed of greater wax and glue.The standard plate width chipboard - 16 mm, has a thick specimens - up to 18 millimeters.

also in the manufacture of kitchen furniture with their hands, you can use MDF, but it needs to be painted.The material itself slightly more expensive DSP and significantly surpasses it in terms of strength and flexibility.From this material, you can make decorative home furnishings, very useful when molding.MDF density in some cases even superior to natural wood, that is why is considered the most commonly used analog.

Materials for the kitchen with his hands

particleboard, wood-based materials are ideal for creating a makeshift kitchen.

If the owner - a supporter of all natural and good for health, it is possible to make kitchen furniture yourself of wood.But it is worth remembering that it is very sensitive to the frequent changes in temperature and humidity.It will be necessary to cover all the blanks special impregnations, including antiseptics.This material can be replaced by a novelty in the world of building materials - multiplex.It is not deformed so much and not exposed to moisture.

Countertops can be made of particleboard, MDF, natural wood.But it is worth remembering that most of the load is exactly it, so manufacturers are advised to make their kitchens made of natural or artificial stone.The first is quite expensive and very heavy.The second is much easier and more amenable to treatment better.

Recommendations on independent manufacturing of kitchen furniture

The first thing you need to start the assembly of kitchen furniture with their hands - is measurements of the room and the place where will be located the future kitchen.In specialty stores you can find everything you need to build, but it is necessary to be alert to the possibility that some of the details will not be able to make their own, need the help of specialists in sawing on the set sizes.

For furniture needed:

Instruments
Widget from SocialMart
  • hinges for furniture;
  • SCREW;
  • screws;
  • dowels;
  • electric drill;
  • jigsaw;
  • screwdriver;
  • drill;
  • pencil;
  • roulette.

primarily going to the lockers.To do this, drill holes for the metal ties.When the main body is ready to install the rear wall.It is better if it is made of laminated chipboard.It is necessary to check the proper assembly, product geometry and fit feet.

countertop installed in the last instance on the lower cabinets.It is fixed on the screws.But the hole in the countertop for cleaning must be prepared in advance.To do this, put a table top on a flat surface on top - the sink upside down and carefully cut around it with a pencil.Retreat from the resulting line 1.5-2 centimeters and carefully cut out the hole.To keep water from getting under the sink need all internal seams carefully handle silicone sealant.

Before you mount the facades, you need to fix the loop.From the top edge pull back 80 mm, and the center of the hole should be in the 20-25 millimeters from the front edge.

How to restore old furniture

Many would agree that the restoration kitchen furniture with their hands - is an art.In addition to the financial side of the issue, there is still present aesthetic.Not everyone will tinker with the old, step by step, restoring the geometry, color, the overall style.

  • to bring any furniture to order you must possess the following skills: literacy and trim disassembly;
  • cleaning and washing products;
  • struggle with lacquered surface defects;
  • work with wood defects;
  • repair and reinforcement anchorages;
  • veneer;
  • staining and wood primer;
  • painting, decorating the appearance of the product, aging of, varnished with a high protection factor, polishing.

most difficult thing is to restore the table, to be more precise, his legs.You will need to remove the old veneer, restore the shape of legs with the help of liquid wood.

There are some subtleties of work:

  • bathing furniture is best done using a standard detergent.When polishing is also possible to use the car polishes;
  • If caring means are composed of ethyl alcohol, kerosene or liquid ammonia, it is best to check its effect on the surface of the training;
  • most popular wood treatment material is considered to be a green peel walnut;
  • protection of wood from pests and rot, you can cover the entire surface of tannin;
  • If the piece of furniture you need to paint, it is best to take the oil or acrylic enamel;
  • If you need hauling fabric, it is preferable jacquard, velor, kurtizan.

If you have a defect, it would help fix his article how to remove the chipped furniture.