Build Daily

Latest

August 12, 2017 18:08

How to make a pool table with your hands ( figures )

Content

  • 1 Where to start?
  • 2 Materials
    • 2.1 list of materials:
  • 3 Started
    • 3.1 dealt with the theory proceed to practice.
    • 3.2 Cover part
  • 4 Checking the strength or the moment of truth

Billiards is one of the most popular games in the world.And to this day a great pleasure for the game in the company of friends.But, unfortunately, the cost per hour is large enough, and at home to play much more interesting than a ride somewhere.And often it happens that in a small town and does not have a billiard room.But what do the inveterate player who more than once visited this wonderful atmosphere and feel the passion of the process, scoring another ball in the hole.There is a way out.Billiard table with their hands, you can do so just as a cabinet or bedside table.

billiard balls

have to make here only a little more effort and perseverance, because it is essentially a luxury item and should look the part.But do not expect 100% results-the first time.After the creation of billiard tables was

not just a profession for many, and art that can be mastered only by spending a lot of time to practice, and created more than one such table.And it will get better and more beautiful each time.

Where to start?

In order to make a good billiard table with his hands the drawings are not necessarily be their own.They are quite a lot can be found on the Internet, with friends or masters, in the end, to seek help from an experienced carpenter.He certainly will tell and show you how to start, how to calculate the stiffener.

After billiard table should be as strong and heavy, so that when the game it does not vibrate and Skewing by relying on him.Therefore, many immediately raises the first question, how to make a billiard table with his hands, so he was a strong, durable, correct geometry and maximum functionality.drawing table

gambling table - it is also an element of the interior, so it must be done in the style of the room design.It is also the case that the room is very small, and it has to fit not only the pool table, and auxiliary furniture, you should design it collapsible.

In general, according to the location and spatial abilities.Likewise, its overall dimensions.The optimal vysota80 cm, length of 2 m and width1. And if 0,83h190h90 happen, then I am sure you will feel the difference and not the original.

Materials

To make a billiard table with his hands, respectively, and require high-quality materials.Previously, as they used only high-quality solid wood noble breeds, such as oak or beech.The cheaper models are used more accessible and easier to handle the breed, such as pine.While the table was completely taken out of it, starting from the feet and finishing top.Today, as the countertops are cheaper and much easier to use chipboard not menee18 mm thick.It can be thicker and will be even more reliable, but the table will be much harder.

list of materials:

  • solid wood (lath and trims from it) to the sides;
  • chipboard (tabletop, supporting structure and legs);
  • metal braces-lining for pockets;
  • fabric lining and decorative;
  • hardware;
  • mesh pockets for;
  • rubber for shock edge;
  • adjustable feet.

The list may not include all the materials, so be ready, something to purchase.

Started

How to make a pool table with his hands drawings where to find the most suitable.Once again, that the sizes may differ, so wise to develop them independently.But also all the technical documentation on the gambling table can be found in large numbers on the Internet, including on this site.

dealt with the theory proceed to practice.

The first phase is cut chipboard, it can be produced in the same organization, where he bought.This service is not expensive, so it is quite possible to take advantage of.The more that the professional equipment you are guaranteed 100% compliance with the geometry.

Further, manufacturing of a billiard table with his hands turns into a stage of assembly of the assembly.Typically, one standard sheet of particle board is just enough to cover and support structure with sidewalls.This table-top can be sized 2,18h1,18 m and the reference design elements from the rest of the just obtained po13,5 see.

Many at this stage ask themselves "how to make a support structure to get strong pool table, how to doproperly mount all the elements that design did not play? "And the answer is in fact quite simple.

Instruments
Widget from SocialMart

main thing is that the support structure had at least 3 ribs t. E. It can be done in the form of a lattice, and all the elements to be fastened together with ties sizing ends.Then necessarily need to strengthen the construction of small wooden cubes metal corners.The bottom is not visible.pocket

as legs must use reliable and thick items made of solid wood.It can be thick bars at least 100x100 cm in my opinion.They can perform a carved or sheathe the same chipboard with further trim the edges.

Cover part

to repair the pool table with his hands did not catch you by surprise during the game, all the action necessary to make the maximum quality and in good faith, because itself is doing.

board game table is a decorative part and usually consists of many elements:

  • side;
  • outdoor decorative strips;
  • visible decorative slats with glued rubber bump stop and covered with a green cloth;
  • bottom has nakladochnye strips of the same chipboard, to increase the stiffness of the whole structure upon impact.

If you make a billiard table with their hands photo shown on the website, will help you in difficult times.Because they depict all the most important moments with the necessary details.The size of billiard tables

Prior to installation, the boards must be made in the table top slots for the pockets using the jigsaw.As a rule, their width sostavlyaet90 mmpri size sharov60,3 m. Corner pocket made with a small extension to the edges.This will allow the ball to get 100% in it in a collision of the inner wall.Then you must glue backing fabric on the playing field, the decorative fabric should be stretched and fastened with staples to the table top.

When actions are completed with a lid, it should proceed to the treatment of skin-tight board and decorative strips.Board are known from an article composed of rubber baffle, decorative rail profile rail and to which is adhered, this is the rubber.One of the most expensive materials is just exactly this tire.drawing
In order to achieve 100% compliance with professional pool table, it is necessary to acquire the original.But since it is very expensive, you can use the belt from the tractor.If you cut it in half lengthwise, then it will be enough for the entire perimeter.Naturally it is glued to the adhesive quality, for example, time.Before wrapped with the resulting structure must be treated with sandpaper.The fabric on the table is constantly exposed to mechanical stress.Therefore, fixing the boards are carried out on screws or through bolts.Then hauling billiard independent not be easy, if necessary.table leg

After fixing the boards can install metal clips and pockets.Staples beautiful, supposedly will look like in a leather sheath.Plus, it will soften the blows of the balls themselves bracket.At the same stage, and is attached to mesh pockets, which can be woven as yourself, but you can buy in the store, something like that.Here, in particular the strength does not make sense, as long as the ground balls do not fall.

If you make a billiard table with his own hands, will become an indispensable assistant to video, because that article sets out only general principles.And in the media file, you can specify all the nuances and details.

Checking the strength or the moment of truth

properly designed and assembled a pool table in good faith should not sag under load, to vibrate and resonate in the fall to the surface of the heavy balls.


table should be set at the level, for that leg should be given this opportunity.They can also make your own, for this in the shop are purchased durable wheels on the bracket.Typically, they have a stud, which is to be screwed into the nut or clip.It can be made from a piece of metal bent into a profile and a welded nut.

Choosing the right tires does not allow the ball to bounce away from the board while the board does not deteriorate.