Build Daily

Latest

August 12, 2017 18:08

Making corner apartment

Content

  • 1 When you want to finish the corners?
    • 1.1 What material is better suited to protect the corners
    • 1.2 How to strengthen the plastic corners on the corners of the walls?
  • 2 Conclusion:

For finishing angles in the apartment should be used in cases where the family grow small children or animals are kept.Since the finishing plaster mixture does not have great strength, they disintegrate when exposed to light.

Especially often are destroyed outer corners.On wallpapered corners often appear dents in the painted corners appear notch.

To protect the corners require the use of special tools and techniques that protect the corners from breaking down.

Immediately observe the process of finishing the corners of the apartment is a complex and important stage.Flat surface to get much easier than to align corners.

When you want to finish the corners?

corners Finishing the apartment is suitable in cases of installation in the corners of the rectangular furniture.Alignment eliminate

s misalignment angles, allows harmoniously placed rectangular furniture.

Do not forget!For large imbalances is not necessary to resort to the alignment angles, since the alignment decreases useful floor area, but possibly beat rock.

What material is better suited to protect the corners

in any room corners are divided into internal and external.And if
to inner corners to get difficult, the outer corners are affected more often, and not only on careless rackets heavy household appliances or furniture.
angles scratch animals, and children, they often stand in the way.
For finishing angles most commonly used plastic, metal, polystyrene, wood corners, special galvanized steel profiles, decorative stone.
have plastic parts of a vast range of colors.They have high softness, different degrees of roughness.

the question: "How to decorate the corners of the walls in the apartment," the best answer given below article.
wood and stone in the design of 001
Consider all materials and accessories used to protect the corners of the walls.Under
materials means the use of drywall, as well as the use of devices of metal, wood, polystyrene parts, PVC corners.

alignment angles is one of the most difficult stages of finishing the interior, requires theoretical knowledge, extensive practical experience.

protection wall corners by installing special devices.In the corners of the different materials are most often used as a protection wall corners.

The most common protection angles are set corners of PVC.

Plastic corners should be installed after all the finishing work.

Plastic corners are mounted on the wall using the mounting glue for plastic products.

plastic corners are available in lengths of 2.5 m. The width of the corners is different, from narrow to wide.

To choose the right corner of the width, you need to measure the angle of curvature.

With greater curvature is preferable to select angles of greater width.

narrow corners used on virtually flat corners

For starters, we recommend you opt for the average width of the corners.

How to strengthen the plastic corners on the corners of the walls?

Option 1

    1. When it is necessary to help the building corner to measure the angle of deflection.
    2.Zamesit desired consistency solution of dry putty mixtures.
    3.Rastvor apply the usual spatula, flatten the corner, giving the corner a rectangular appearance.
    4. After complete drying of the angle, attach the plastic perforated angle and close the finishing putty.
    5. When the layer is completely dry, make an abrasive grinding surface of the mesh.

outer plastic corner
Option 2

    1.Plastikovye corners are mounted on pre-prepared surface.If necessary, remove the old wallpaper with a knife Drywall, smooth out the surface of the old paint.
    2. On the inner surface of the corner, apply the adhesive with a pitch of 30 ... 50 mm.The adhesive is applied dashed.
    3. When the adhesive reaches the desired viscosity (indicated in the instructions on the glue), attach the plastic corner to corner of the protected and secure top masking tape.
    4. In place of liquid nails is possible to use a colorless silicone.

plastic corner
These options protect the corners of the walls are also suitable when using a metal profile parts.

If you want to not only protect the corners, but also perform a decoration in the flat corners, use a wooden or polystyrene corners.
polystyrene Area
Foam polystyrene corners
Styrofoam is a non-combustible material.

Corners of polystyrene foam do not absorb moisture, it does not stick to the dirt.Polystyrene can be used in the corners of the premises with any temperature regime.

surface polystyrene corners lends itself to staining.Profile parts created by molding and is available in various forms.

finishing outside corners of the apartment using polystyrene corners justified in those areas where small cross-tenants.

Decorative corners of the styrofoam can not only protect the corners, but also perform a decorative design angles.

Mounting is possible on a special adhesive and the ordinary acrylic sealant.

wooden Desk
Corners of wood
main advantages of the wooden parts are:

    attractive appearance;
    environmental friendliness;
    possibility of creating a thread or decoration.
Instruments
Widget from SocialMart

Corners of wood are indispensable material for decorative corners in the apartment.
We need only remember:

    do not use wooden corners in areas with high humidity;
    not recommended corners of wood in areas with large temperature differences.

Stone as a means of decoration
Recently, the use of stone became fashionable in interior decoration.Especially organic decoration stone looks while protecting the outer corners.
Finishing corner stone
use of stone is especially appropriate when the outer corners have large deviations from the geometrical form.There is no need alignment of walls and corners.

Just note!Better to use decorative stone.It is easier and natural.And the presence of a smooth surface facilitates hygienic maintenance.

Mounted stone with a special solution or plitochnog glue.

Step 1

for laying decorative stone surface should be prepared,
cleaned of dirt, dust, old coatings and primed.
If the surface is very dry, or you produce work at a temperature of + 30 ° C and above, it should be sure to moisten.
It is necessary for a better penetration of the adhesive into the depth of the prepared surface.

Step 2
Clay diluted according to the instructions in amounts that you can use while working.adhesive properties are maintained for 2 hours.

Step 3
cooking glue is better in a plastic container using a drill with a mixer-nozzle.After stirring the glue held for a few minutes and carefully mesh.

consumption of glue.At 1 m Square need not less than 6 kg of solution.What tile adhesive you will need to help find a calculator online.

Step 4
on the back of a stone mortar is applied with a spatula, the edge of the tiles coated with the solution.On the surface of the wall is applied to several cakes solution and applied the stone.

Step 5
stone with force pressed against the surface, checked plumb and level correctness of its installation.

Step 6
Stacked stone in three rows, stop working.Glue two hours completely cured.This will continue laying the next 3 series.

Remember!Non-compliance with the requirements of step 6 will lead to the collapse of the construction under its own weight.

Plasterboard with finishing corners
Application of plasterboard sheets plasterboard allows you to align all the most corners curves.
for mounting drywall sheets, there are two ways: frameless, framed.
drywall frameless
Method 1
Frameless installation of gypsum boards used as internal and external corners:

  • performed surface preparation;
  • applied to the surface of the sheet of drywall and is marked;
  • on the other side of the angle and also applied a sheet is marked;
  • knife cut blanks and made a plane desperately mating angles drywall;
  • prepared blank sheets of drywall are attached again to the corner, and adjusted;
  • into sheets applied polyurethane foam;
  • both blanks are applied to the wall and pressed;
  • sheets are removed, leaving traces on the wall of foam;
  • into sheets re-applied polyurethane foam;
  • foam have to give a little dry and attach sheets in place;
  • will adjust the angle, using a wooden rail or building level.

more on the slopes on the windows.

angle of plasterboard
Method 2
Frame method is recommended in cases of large curvature.
This method is more time consuming, but can significantly improve sound and heat insulation:

  • necessary to measure the angle of deviation;
  • set frame using galvanized steel profiles, fixing them with dowels, screws;
  • on the frame set gypsum board and fixed with screws;
  • resulting surface puttied, polished;
  • corner protected by a perforated grid.

If you plan to mount the frame of wood is required to process the blocks of wood preservative that protects wood from mold and parasites.

more details on the type and installation of PVC panels.

Conclusion:

  • proposed ways to trim the outer corners can be combined not only in one apartment, but in the same room;
  • easy finish drywall corners requires additional costs;
  • most expensive material for protection and decoration design corners - an artificial stone;
  • trim angles in the corners of the apartment allows you to make room not only a complete form, but to protect the corners from damage.

https: //