Build Daily

Miscellaneous Articles

August 12, 2017 18:08

How to destroy the fungus on the walls


  • 1 How to get rid of mold, mildew in the flat folk remedies
    • 1.1 mold Types
    • 1.2 mold in the apartment.What to do?
How to destroy the fungus on the walls How to destroy the fungus on the walls

The cause of the fungus in the house is increased stagnant humidity.It is necessary to break the ventilation in the repair of apartments, and on the walls there are small spots, which are then fused together.Mold penetrates deep into the layer of plaster, and destroys it.The spores are spread through the air and are the cause of various diseases, especially in children.If you got the raw affected fungus apartment, do not despair.Any problem can be solved.The main thing - to know how.

to destroy the fungus on the walls you will need:
- trowel or stiff brush;
- roll;
- heater;
- plaster;
- putty;
- composition for removing traces of cement and plaster;
- antiseptic solution;
- acrylic primer antiseptic;
- waterproofing solution;
- thermal insulation paint.

1. Hold the fungus removal in summer, warm and dry weather.Be s

ure to further dry the surface.You can use the fan heater or hairdryer.

2. Remove from the walls of wallpaper or decorative coating.Remove the affected places plaster.Try to remove as much as possible, because the mycelium of mold often extends far beyond the visible lesion.Use a putty knife and a stiff brush to thoroughly clean the brickwork.

3 To open the pores of brick, masonry treat the composition to remove traces of plaster and cement.Dry the wall again.

4. Put on the wall roller germicide.Use special antiseptic solutions, unlike folk remedies they can deal with different kinds of fungi, molds and pathogenic bacteria.Familiar housewives agents such as urea or sulfate, killing one kind of fungus and create a favorable environment for others.

5. Prime the wall with acrylic antiseptic ground.It is necessary to remove dust wall and increase its adhesion.

6. roller or wide brush, apply to the entire surface of the wall waterproofing solution to prevent further penetration of moisture into the layer of plaster.After drying again treat waterproofing wall antiseptic ground.

7. Now the wall is ready to spray plaster.When the plaster is dry, treat it with a special insulating paint.After that the wall is necessary to putty and dry well.

8. Only after the final drying on the treated surface can be applied decorative coating: glue wallpaper, ceramic tile or install wall panels.

Useful tips

If you live in a private home, be sure to treat the outside wall of the house hydrophobic materials.Such work in the city are required to hold your employees dispensation.

often cause wet walls of a violation of the rainwater drainage from the roof.In this case it is necessary to unite the owners of several apartments and demand the elimination of the problem.

How to get rid of mold, mildew in the flat folk remedies

People struggle with mold for a long time.The effect is different. and sometimes positive.But if earlier people only worried about the aesthetic aspect of the problem: mold looks ugly and worsens the external perception of the room, but now scientists have proved an absolute damage and mold hazard to human health.A wide variety of diseases wait for a man, if he lives in a room with mold and moldy food uses.Consider how you can get rid of mold, fungus, or at least reduce their numbers around us, improve our quality of life.

mold Types

Mould is a lively, sprawling in a branching mycelium.Mould and sometimes useful.

1. Aspergillus niger used for the production of sweeteners and citric acid as well as vitamin B2 (riboflavin).But in vivo Aspergillus niger is the most dangerous for human and animal health black mold.This is exactly what we see crude corners premises, under the old tile in the bathroom, in the cellar, barn, garage, and so on.In the phase of the fungus fruiting disperses spores that get into our bodies and breath poisons our body.Sometimes black mold grows on bread.

Widget from SocialMart

2. Botrytis cinerea in its imperfect stage is used for the production of wine, in particular sherry.This fungus called noble rot even as it helps to create materials with high sugar content.The people called Botrytis cinerea gray mold.It grows on the walls of buildings, especially wooden, but prefers to live on green plants.If you are on the plot start to rot strawberries or tomatoes, it is likely to hit their gray mold.This mold is not as dangerous as black, however, is not worth it to breathe disputes, as well as to eat foods affected by Botrytis cinerea.

3. Penicillium is also considered a noble mold used for the production of cheese.Cheese is laced with blue-green spores of this fungus or topped with a crust of this mold.From Penicillium also make the antibiotic penicillin.They treat inflammatory processes.But the weakening of the body, this fungus can also live in it, causing a variety of illnesses, including fatal.Penicillium mainly settles on the products, so long-term storage of sterilized boiled and so on.Sometimes it appears on wooden surfaces in the home, especially if they are wet.

4. There is still a white mold.It is also used for the production of cheese.But it can settle in the apartment.It is also necessary to destroy, although it is not as dangerous to health as the above-mentioned types.

5. Ordinary yeast is too moldy.While we actively use them for food, but many scientists believe that it is also harmful to health.

mold in the apartment.What to do?

As we have said, the most dangerous in the apartment is a black mold.So often people ask in forums , how to deal with black mold.This mold is very dangerous.Therefore, it is first gently removed from the walls, protecting the respiratory respirator or gauze bandage to not inhale spores.This is called mechanical removal.The surface to be treated, such as copper sulfate, dilute formalin or a mixture of aluminum potassium sulfate, ferrous sulfate and sodium chloride.Chemical treatment can be carried out and with the help of burning sulfur.sulfur combustion products kill all possible fungi.

mold in the house of the tree can be killed with creosote.But the interior, where people live, they do not handle because of the strong smell.If found on the walls of the mold, and they are made of wood, they may be coated with varnish.But it's not always convenient to do to find mold on the floor or mold on the furniture.Then you can grate the soap, mixed with urine, mix insist day, then rub tree.Then it is necessary to wash out, and it will continue to smell.Mold in the closet can be destroyed as well.People anciently known ways of dealing with mold on wooden surfaces, because the house originally were all wooden.

If found mold on the walls, and they are not wood, you can use salt "Bischofite".

sometimes found mold on the wallpaper.How to fight, it is not always clear.After losing the wallpaper look, if anything processed.It is best to make repairs and replace the wallpaper, pre-moistened walls biocide.

If you have a white mold, how to deal with it, too, will prompt our article.White mold often appear in flower pots, and then affects the whole apartment.Although it is not as dangerous to health as black mold, get rid of the white mold is also necessary.One can use the same tools as for combating mildew black.If the mold in the basement, where vegetables are stored, you can put there quicklime box.Good help kill the fungus.

Sometimes in pots or in the aquarium appears green mold.It is also harmful.How to get rid of green mold, people also know for a long time.All of the above methods can be used.However, remember that the greatest reliability in dealing with any kinds of molds produce chemicals.They can be bought in a special shop.If you want to get a quick and reliable results, consult an expert.Especially if the mold was struck large areas of your home.

good method to prevent mold is room ventilation, drying things, including food.Requires quick repair spoil the plumbing.Dripping water leads to the development of dampness.Mold usually reproduces well in the dark and unventilated, warm, moist places.In dry and well-lit living mold rare.Therefore, this type of prevention of mold growth will save you time, money and nerves.

other ways how to get rid of the stains on the ceiling rzhavcheny