Build Daily

Latest

August 12, 2017 18:08

Repair of the parquet with his own hands

Content

  • 1 Home Restoration floor
  • 2 sanding and polishing of old parquet
  • 3 9 stages of repair

Repair flooring in their own hands Hardwood floors are considered the best floor coverings.New flooring is always well polished and has a lacquer coating, it always looks nice and solid.But while no one is spared.Parquet gradually becomes unusable, it cracks occur.He cracks are beginning to crack plank.Replacing the old flooring to a new - very expensive pleasure.It is much cheaper to carry out the restoration of the old parquet.Usually, parquet have to be restored once in many years.It all depends on the conditions under which operated parquet.Website renovated apartment with his hands prepared a brief guide to self-repair the floor.

Home Restoration floor

To remove tarnish and loss of parquet colors, you need to use the sander.Small scratches on the floor, easily removed filler or grinding.After the performed operations, parquet need to varnish or wax.If parquet began to creak, it must perestelit.Scrape is due to bad p

arquet installation or use of incorrect technology.

parquet Swelling may occur in contact with moisture.Such damage can be corrected in one way only - perestilaniem parquet.To replace the cracked or broken rivet is necessary to replace a broken parketiny.To do this, you need to completely remove the adhesive base.Then you need to make preparations and fit the new riveting size.Spend fill special mastic wherever riveting stacked.

After pouring the need to install riveting.In the riveting is necessary to put a heavy load, first removing all speaking mastic.After finishing all the work is done scraping.It will help hide replaced riveting.After sanding is required floor sanding and varnishing.The varnish should be applied in several layers.The coating is durable, if several layers of lacquer will be applied.

make it a better grip of all layers, polishing should be carried out after each layer is applied, except the last one.Working with varnish requires not forget about safety.We must always remember that the paint is flammable.When working with lacquer necessarily use respiratory protective equipment.We must not forget to ventilate the room.

sanding and polishing of old parquet

The parquet sanding the old days was called the removal of the surface layer of the tree.Nowadays, with the advent of new technology and different grinders, sanding began resurfacing flooring.This operation is carried out in several steps.Sanding parquet flooring gives you the opportunity to save on a much longer time than just the removal of the top layer.For sanding operations use a variety of grinding machines.They can be a drum, tape, surface grinding and others.We have understood how to perform manual scraping the parquet with his own hands, using a loop, check if necessary.

Instruments
Widget from SocialMart

grinding machines for parquet initial grinding is very rough.Here, all strongly depends on the professionalism of the master.This grinding should be done without flaws, so that later were not found holes and inconsistencies.Scratching of sex occurs in the following sequence:

9 stages of repair

1. Parquet subjected to rough grinding.For such grinding use a special machine drum or orbital sanders.Vehicle drum type have a high performance but requires a high skill.Coarse sanding removes all the bumps, remove all the old paint.

2. After rough grinding, fine-grinding of the old parquet.For it used disc surface grinding machine.Fine sanding cleans remaining irregularities and flaws.

3. The third step is grinding the most inaccessible places.

4. After all needed resurfacing zashpatlevat all the cracks.The filler, it is desirable to put on the whole parquet, but can only putty cracks, chips and dents.Applying putty on the entire floor, require large financial costs.With local putty can not see the crack.You may see a discrepancy in color.

5. When will the drying of putty, fine grinding is carried out.It removes an unnecessary layer of putty, leaving her alone in the crevices and pores.

6. Before varnishing the surface, do not forget to remove accumulated dust and debris.

Cover parquet lacquer 7. When cleaning is complete, you can start your own paint old parquet lacquer.

8. Covering parquet lacquer for the first time, you need to wait it dry completely.Then make an intermediate sanding.It will remove any excess lint and debris.This grinding will improve adhesion layers.

9. When will be completed intermediate sanding, you must vacuum the parquet and polakirovat it again.Parquet does not require repair, if it is properly installed.Such parquet will be long and reliably, restoration and repair of the old parquet floor does not need the next 10 -15 years.