Build Daily

Toilet

August 12, 2017 18:08

Maintenance and repair toilet installation

click fraud protection

Content

  • 1 Features installation repair toilets
  • 2 How to Repair install the system yourself

modern installation system from the Swiss company Ceberit most commonly used.a high-quality fittings, ideal for most types of toilets.She rarely goes down, and if that happens the repair installation geberit easily spend without breaking the finish wall.This is what will be discussed in the article.

Features installation repair toilets

hanging toilet installation system has clear advantages over standard sideburns: it is flush mechanisms of high quality and large variety of keys, buttons, and can be mounted with any room interior.The main advantage - it can hide.

But it does not matter how high-quality equipment, it tends to fail.What contributes to this and how to repair the toilet installation, consider the following.Thus, the types of damage can be very different.Let us dwell only on the most common:

  • Leaking tank (the reason most often in the bottom valve);
  • tank is not filled with (the reason - in the filter is clogged or the water supply hose);
  • Continuous filling tank (the reason - in the failure of the gaskets or improper installation);
  • flush valve malfunctions (the reason - in the wrong choosing a disinfectant)

eliminate these and other possible faults easily by opening the drain button.That is, to dismantle the barrier or break the tiles do not have to.Simple installation, repair toilet suspended specialist conducts through the Audit window, because all parts of the system are easy to remove and are extracted.

How to Repair install the system yourself

As mentioned above, high-quality repairs performed only by the master.But you can independently take up the case by examining the pre-repair of a tank with the installation of video that can be viewed below.It clearly and simply told about how the dismantling of the equipment in the installation and flush inlet valve Ceberit.

Operation when dismantling Ceberit system installation:

Instruments
Widget from SocialMart
  • Step one: Removing the flush button.To do this, click on it at the bottom and, thereby, carefully remove the cordon, and then to remove the wall.
  • Step Two: Removing the frame.First, it can be turned out fixing screws on the sides, then remove the clips-pushers and removed the frame.
  • Step Three: Removing partitions.You must click on the special clamps and remove it.
  • Step Four: Water overlap.Without this repair tank Geberit installation will turn into a flood.
  • Step five: the dismantling of the inlet valve and remove the rocker unit.
  • Step Six: Lock dismantling drain valve.
  • Step Seven: the dismantling of the drain valve, which is located inside the tank.All dismantling and can be made to carry out repairs.

Accordingly, the assembly after installation of all necessary reconstruction is carried out in reverse order.

How do I wash the inlet valve installation Ceberit

installing the installation system, after a while you will notice that the water is poured through the valve and into the tank.This is a signal that due to impurities that are in the water, clogged inlet valve system.no need to rush into a panic, because all this is easy to fix on their own, seeing a short video on the topic.

To begin, remove the valve itself.Basically, to remove it completely, there is no need.It is enough to unscrew the cap and remove the rubber gasket.That's it, and need to be thoroughly washed under a strong jet of water.To be safe, wash and valve cover.

now collect everything in reverse order and see that the fault has been rectified.So easy it is possible to repair the installation of a suspended toilet.

Repair fittings to install Geberit video on the device and installation

Repair cistern mechanism video

repair toilet tank valve video lesson

Video review repair installation cistern Geberit Delta

instagram viewer