Calculator paint consumption per 1m2

line ink consumption calculator will allow rationally determine the required number of paint.The consumption rate depends on the type of surface to be coated, its size, abundance of coats applied.So rough, porous and moist wood will require increasing the rate of application of antiseptic.This also applies to rounded surfaces, achieving a uniform color which is possible if the application of several layers of paint.

Technical specifications provide an indicative calculation of ink per 1m2 single coat by determining the area of ​​the painted surface.Calculator paint consumption per 1m2 involves determining the actual antiseptic rules for painting the ceiling, walls and facades.

To calculate the consumption of paint on the wall using a calculator, you must specify the following parameters:

• height of the room from floor to ceiling;
• length of the walls around the perimeter.

paint consumption per 1m2 at the ceiling is calculated by specifying a measurement in the calculator:

• the length of the ceiling;
• width of the ceiling.

To calculate the necessary amount of paint for the facade, measure the height of the building from the foundation to the roof, and the length of all the walls around the perimeter.

calculation of the required rate of latex paint

with water-based paint used as a finishing interior and exterior surfaces.Thanks to technological additives vodoemulsionku ideally placed on almost any surface with the exception of the gloss.To determine the rate of its consumption should be guided by the calculation of the manufacturer, which recommends that the necessary amount of material per 1 sq.M. Usually, the average value varies in the range: 1 liter of paint at 8.10 sq.m.It is important to take into account these parameters are approximate, as they depend on the number of layers applied and the absorbency of the surface to be coated.

Flow Calculator latex paint will most accurately determine the right amount of dyestuff.This will efficiently and cost-effectively solve the issue of procurement of material for painting works.Counting the desired ink volume involves determining the length and width of the room, wall height, area of ​​window and door openings, as well as an indication of the amount of the alleged layers.Experts recommend to be limited to 2-3 layers, between the application of which comply with an interval of 1.5-2 hours.

calculation of the required standards acrylic

Practice shows that consumption of acrylic paint 1 liter is 5-7 sq.m.calculating the norms specified by the manufacturer includes painting on a previously prepared perfectly flat surface in a thin layer.Therefore, during the independent calculation must take into account the degree of surface roughness and application method.Using the roller increases the consumption of the coloring agents by 10-15%.Calculator acrylic flow rationally calculate the necessary amount of material for the walls or the ceiling, allowing the resort to substantial financial savings and time.