Build Daily

Rooms

August 12, 2017 18:07

How to choose a refrigerator

click fraud protection

refrigerator design and its dimensions

best option for a small kitchen is the refrigerator for about 150-200 cm in height, with standard sizes of 60x60.Specific height of the device should be selected based on the number of users - for one or two people will be enough small refrigerator, and for a large family better to choose a model of about 2m high.Width or depth usually varies sizes, which allows you to put in kitchen.

required the useful volume of the freezing and refrigerating compartment as determined based on the number of people who will use it.Too big refrigerator will consume more energy, which will make its use impractical and small will be uncomfortable when placing more products than that for which it was designed.

How to choose a refrigerator 1

Inside the refrigerator

To understand how to select the refrigerator, you need to know how many cameras you need users for its ease of use.On the market are devices with one, two or three chambers.If you do not need long to keep products, you can safely choose a single-chamber version.But if there is a need for storage of frozen food, it is necessary to consider a model with a freezer.

at low temperature compartment is usually present the marking of the temperature conditions in which the camera works:

  • Without icons - shelf life of 2-3 days
  • * - the temperature of -6 degrees can save freshness up to 14 days
  • ** - minus 12 degrees - Shelf life up to 3 months
  • *** - minus 18 - the products are stored in the camera up to a year.

Preferably choose two-door model in the presence of the freezer, since their use more convenient than analogs with one door.Fridge with top freezer compartment under the same are more comfortable to use.If there are a large number of products that require long-term storage, it is necessary to look for a model with the function of fast freezing.

How to choose a refrigerator 2

defrost fridge Type

Household refrigerators come in two defrosting systems:

  1. Drip - condensation builds up on the rear of the device, draining into a special chute, and then falls into the tray located on the compressor evaporateswater.Such models need to be thawed at least once every six months.
  2. system freeze-dried No Frost - cooling products is due to the circulation of cold air, in consequence of which the ice is frozen on the surface of products and equipment parts, cooling is more evenly, refrigerator does not require defrosting.

How to choose a refrigerator 3

Functionality and design modern

range assumes the appearance of features such as electronic control panel, an antibacterial coating of internal surfaces, the presence of ice generator and so on.Of course, there are additional opportunities to influence the value of the goods.

As a rule, domestic refrigeration appliances installed one or two compressors.When using a compressor load on the motor increases, and as it is impossible to set a different temperature conditions in the cells.The two-compressor models there is a possibility of temperature control and independent work of different departments.

How to choose a refrigerator 4

It should also pay attention to the energy class of technology - the most cost-effective option is the one which is labeled A ++, the least advisable to purchase a model class C - the least favorable in terms of energy consumption.

Before you choose a refrigerator, it is necessary to articulate their demands to the device, and then familiarize yourself with the guidelines given above, and then to carry out the purchase.

instagram viewer