How to apply structural paint

Before working

In order to begin work on drawing structural paint on internal or external surfaces of the need to prepare a number of tools:

• structural paint.
• Primer.
• Brushes.
• spatulas.
• Building roller.
• Tray for pre-loading dye.
• clothing.

Step by Step performance

work on the application of structural paint on the surface of the apartment is composed of several turn-based events:

• Surface preparation for painting.
• priming.
• Preparation of paint to get started.
• process of applying paint on the wall.
• process of applying paint with a pistol.

to work

Step 1. Prepare the surface for painting.Before applying the paint necessary to make structural manipulation for the preparation of the surface to work.It is necessary that the wall was free from extraneous elements and does not peel off.It is also necessary to give the work surface to dry.Old solid paint that can not be deleted, must be sanded, than to give it the greatest possible smoothness.If there are traces of the wall surface of the fungus, it is necessary to remove them with a spatula, and then treated with anti-fungal agent.

Step 2. Priming the surface.After preparing the surface it is possible to start priming.Priming is performed by mounting the roller.In places where the roller treatment is not possible, use a brush.It is best to use a primer of deep penetration.

Step 3. Preparation of paint to get started.Paint that has too dense structure can be diluted with water or solvent.After bringing the material to the desired consistency is necessary to add to it a dye and mix thoroughly.

Step 4: The process of applying paint on the wall.When painting is necessary to apply a certain amount of paint on the spatula, then transfer it to the work surface and smudge.Then it is necessary to perform leveling by roller, pre-moistened with water.The process of alignment of paint on the wall is necessary to make longitudinal, then transverse movements.The structure of the pattern will depend on how the process was carried out applying the paint on the wall.

Step 5. The process of applying paint with a pistol.Work on drawing structural paint with a pistol made in several layers.At work is also used at first vertical, then longitudinal movement.When working with surfaces located outside the premises, you must see to it that during the work there was a lack of a strong wind, rain or direct sunlight.

Thus, the article has been described and characterized, the process of applying the paint on the structural external or internal surface of the premises.