Build Daily

Equipment And Tools

August 12, 2017 18:07

Forced concrete mixer

click fraud protection

Why a cement mixer

In all types of work tools used for mechanical labor or their automatic counterparts.Choice of instruments on a manual or motor-powered repelled from the amount of work that must be done.The same situation is with kneading cement mortar for building works.If enough of them will be 100 liters of solution, it may be implicated in the trough with the help of a shovel.But if you want to build a house, then the batch solution manually prolong this event for a very long time.Therefore, where necessary large volumes of solution used concrete mixer.It is enough to throw back the required number of building components and after 15 minutes ready concrete.

Image №1

Differences between forced and gravity mixers

mixers are gravitational and forced type.Gravity devices operate by rotating the drum, which moves and agitates the solution inside it with blades.This machine operates using a mechanical traction, and forces of nature.

operating principle of a compulsory mixer is different.In this case the bowl remains stationary, but rather takes the role of a reservoir in which the work occurs.Mixing is carried out using materials of the blades that are located inside the container and connected to the engine.This type of mixer is designed for the production of a large amount of solution for the maintenance of large-scale works such as construction of homes in several floors.Also in this type of equipment, in contrast to the gravity mixer, kneading can produce sticky hard mixes and concrete.

However, this unit has a large size (covers an area of ​​several square meters), a tangible weight (200 kg), and requires a high voltage of 380 watts.

Image №2

Most instances of forced concrete mixers concrete mixers

Among the forced type emit different types.

most powerful system of forced type concrete mixer apparatus is a two-shaft kneading design.This drum unit has a rectangular shape and is made of solid steel.Inside the tank there are two shaft to which are attached blades arranged as close to each other and to the walls of the drum.This significantly reduces the adhesion of the solution during the machine operation and increases the overall performance.

Loading unit before work takes place from above, through a special cone-shaped device.water is supplied through a special system consisting of various pipes and pumps.There is also a revision openings through which you can monitor the ongoing work and the window for repair.Drain the finished product takes place through the hatch, which is connected to the feed pipe.

Olympus DIGITAL CAMERA

Forced mixer with their hands

The variant of construction forced mixer with their hands, but this work will require a lot of effort and materials.First of all, you need to prepare the drum is made of thick metal, shafts, blades and a powerful motor.Also in need bearings.For the construction of the assembly will be required Bulgarian, welder, drill.

Image №4

work must be done in several steps:

Step 1 Preparation of drum

To do this takes a barrel or another tank of similar design.Then he removed the bottom and top, then cut the boot screen, the edges of which are finished with rubber.

Step 2 Create

support of a metal support bracket is welded, which then is placed prepared chamber for mixing.It is necessary to check the stability of the structure by mechanical action on it.

Step 3 Assembling kneading mechanism

Once assembled drum and base, you can proceed to the installation of kneading mechanism.To this end, the shafts are welded to the blade and set into the barrel through the pre-prepared holes.Then shafts attached to the motor.Now the whole system can work.Before you start, do not be amiss to run it at idle to check the functioning of the system.

instagram viewer