cement Wash : master the different techniques

problem washing cement

During construction work, some compounds may fall on the clean surface and spoil the result.Operative treatment of materials makes it easy to correct misunderstanding and get a magnificent view of the surface.Working with cement, it is necessary to monitor the accuracy of the procedures, otherwise the frozen droplets of solution will be very difficult to remove.

Special formulations are sold in DIY stores, allows you to remove mineral deposits and cement drops from any surfaces.Typically, such solutions is based on phosphoric acid.Responding to a question, than to wash cement, it is also important to take into account his physical condition.Soft material can be scraped off the special spatula and remove the remnants of the solution with the hardened cement to work much longer.

Approaches to remove dirt

Many resort to the help of a hammer and iron nails, destroying part of the frozen cement, they want to remove it from the surface.This option is suitable only if the risk to put the material damage does not play an important role.In other cases it is better to use an acidic cleaner cement, proper application of which will help to keep the surface in good condition.

To clean tile, experts recommend to put it in the water, closing completely the cement particles.Once the material is soft, it must be scraped off with a chisel, it is very important to keep the tiles horizontally, fixing on a flat surface.

cleaner quality cement may be used instead of water, its softening actives accelerate the reaction, whereby the contamination can be removed within 20-30 minutes.Clean off dirt using a grinder can be only when the minimum speed of the tool speed, pre-material on which there are the remains of the solution should be a good fix.

Try to remove the cement with his hands

There are many options for how to remove the cement, but they all boil down to mechanical or chemical attack on the frozen mass.Getting directly to the question, it is necessary to analyze whether the surface on which the remains of cement, solid and strong, or strong mechanical action can cause chipping and cracks.

If we talk about how to clear the bricks of cement, in this case it is best to use chemical solutions, in order not to damage the integrity of the brick and not to spoil the overall appearance of the structure view.If the risk of damage to the bricks is minimal, and the amount of cement solidified parts is quite large, it is always possible to work with a spatula, a hammer and a large nail.

Practice shows that the solvent cement a real time saver, it allows you to change the structure of the building structure, thereby making it difficult to remove. order to remove contamination from the surface with the help of improvised means, first of all, you need to clear space, reliably secure the surface, if it is a separate element, for example, glass or ceramic tile.

To understand than to dissolve the cement, enough to go to a specialty store and find the means for a particular surface.You need to be alert to the possibility that some compounds may have a negative effect on the picture surface, leaving a whitish stains and marks.

However, there is no 100% secure solutions to the problem, how to remove cement from tiles.Enclosing a piece of cement nail, and starting to slowly destroy the mass, there is the risk of making too strong impact and leave scratches.

chemical solution may come into contact with the coating material, so that the question of how to scrub the cement will be resolved quickly, but the person may have to remove the effects of a chemical reaction.Only careful selection of equipment and extremely careful work will avoid trouble.