Build Daily

Technological Solutions

August 12, 2017 18:07

Thermal insulation brick walls from the inside - the creation of comfort in the house

click fraud protection

Thermal insulation foam

Thermal insulation foam - this is one of the most popular ways.This material is cheaper and at the same time has good insulation properties.To put it into a brick wall, its first task is to plaster that would make a more effective insulation.Once dry wall, it is necessary to putty, so that it was flat.Only now can produce wall insulation foam brick.

on the prepared wall waterproofing material is applied, which prevents the penetration of condensate in the insulation material.This is important, because when wet foam seriously reduces their performance thermal insulation and can also begin to rot.Further styling foam starts.It is recommended to attach it with glue, which is applied to the wall.The sheets are mounted end to end in rows so that there are no gaps between them.After the laying of the foam on top of the spreading layer vapor barrier material.

Important!Vapour barrier - a mandatory layer when the wall insulation made from the inside of a brick house or apartment.

Warming brick walls from inside with mineral wool

This material is also often used for the purpose of thermal protection at home.Mineral wool - an inexpensive material, has excellent specifications and fits quite simple.For its installation is done plaster as well as for the foam.However, many experts argue that it is done is not necessary.Suffice it directly on the brick wall mount crate of rails.Step slats is such that its width is slightly less than the width of the material roll.

Note!If the plaster is not done, the heat insulation layer must be increased.

After that, the crate fit waterproofing.Mineral wool is mounted in the space between the rails.Then on top of mineral wool fits vapor barrier material.If the composition has a vapor barrier foil layer, then it must be sent out, that is, toward the room.Vapor barrier is mounted directly to the furring battens.The surface can be treated in any manner.

Warming using plaster

Previously insulation brick walls outside satisfy plaster solutions.Today, this method is also used for internal insulation.For this purpose the wall is stretched cloth or mesh of metal to serve as the basis for the plaster.It is applied in three layers:

  • layer №1, the so-called scratch coat, done to that in all the cracks and gaps penetrated solution.For this purpose it is mixed with liquid.The layer thickness is 10-15 mm.
  • The second layer - the soil.Clay is the main insulation in the method.It completely covers the entire surface of 50-60 mm.Apply it in several layers to the soil does not crumble under its own weight.
  • last stage - a finish coat.The solution is made using cement and fine sand in a liquid state.The thickness of this layer should be between 3 to 5 millimeters.Its main task - it is finishing, that is, the final alignment of the walls.

Note!Insulation of walls of brick house with the help of plaster - not the most efficient way, so it is better to stop on the first two.

instagram viewer