Battens under the bunk - a step , which depends on the quality of skin

How to prepare materials for the crates?

spite of etymology, lining or sheathing board in today's construction is very popular material.The nobility of wood, its warmth and properties (pleasant smell, humidity regulation, durability, sound insulation) allow bunk occupy a leading place among the finishing materials.

wooden boards used to create crates.bars are used most often the size of 60x27 mm or 50x25 mm.Also need other materials, for example, screws with dowels measuring 10x130 mm (if it is a house brick, if the wood - only wood screws or screws), nails to connect the frame to the battens, saw, hammer, level, fishing line, drill, screws, used tocompound angles in the casing.

also need paint, mastic bystrozastyvayuschaya and several bars for a frame size of 75x75 mm, which can be used as a control in order to achieve a flat surface or base frame.Of course, the need itself linings.Its size will depend on where it will be used: for upholstery inside or outside the house.It is desirable, in addition to natural drying lining passed forced drying.Because of this moisture content will be reduced bunk, and does not appear subsequently slit.

Frame crates - sets the style trim still in the early stages

How to crate under the bunk?The work begins with the fact that with the level of fishing line and create a guide, a kind of frame.The guide is better to do at the top of the ceiling or roof.Now, when we have a perfectly accurate benchmark to fasten wall boards to the frame.

their lodge in what direction?Much may depend on the size of the room or house.There are three ways of filing: horizontally, vertically and diagonally.Each of these methods is used with success, although the latter has a lot of costs, and have to buy more material than necessary.

If battens horizontally positioned externally created the large width of the house, if the vertical - the house seems to the eye above.Clearly, if the lining is horizontal battens nailed vertically, and vice versa.

device directly crates

Once frame is stuffed with, it is fixed to crate lining.For this purpose, the size of the boards, for example, 60x27 mm.They stuffed the house or the frame along the entire length.Before starting to mount the upholstery on the frame, it is desirable to process, to maintain a workable long.After processing framework for lining ready.

As battens nailed to the frame?The best options when the nails are hammered into the grooves or special clamps are used.We should not clog with thick nails, such as nails may split the wood.Especially for such works have nails with a small diameter of the cap.

Once work on upholstery clapboard completed, it is necessary to cover a layer of lacquer or other material to protect it from external impacts.If the lining treatment is done correctly, it can retain its color for 10 years without changes.In some cases, additional rail serving as a base for the battens may not be necessary.It is possible that the wall in a house quite smooth, and the boards are mounted directly to the wall of the house.

Whatever it was, the use level just need to guide for lining were exactly "planted" and did not spoil the view of "belly" or recesses.In the case where the work is being done on the outside and you plan to use a heater, better to first nail down frame.The distance between the bars is equal to the width of the insulation.On top of this framework is nailed crate.