Podiums for speakers in the car and podiums in the apartment

Step by step guide: how to make the podium for the speaker in the car.Step 1: cut and adjust the workpiece

must purchase:

• plywood (10 cm thick);
• cardboard;
• hardboard;
• glass fibers (0, 25 mm thickness);
• paraffin;
• glue (epoxy), PVA glue;
• putty;
• sandpaper;
• knife;
• makrofleks;
• nails and screws.

To mark the frame accuracy of the podium on the paper, then cut out the plywood to the desired shape.You must prepare two identical forms for the bottom of the podium, speaker and ring spacers.After all the parts are connected and secured with glue and small nails.

Then you need to fill in a plywood frame a small amount makrofleksa and putty form and wipe cloth or sandpaper.

Step 2: fining and polishing glass

At this stage, should take the form of a skeleton, that is, to sheathe his glass with paraffin.To secure the edge of the fiber, they nailed nails.For the strength of the compounds do not stint on the three layers of fiber.Once the paste over the surface, walk on it putty.Then you need to cut orgalitovye backdrops to frame and glue them using epoxy glue.This is done to fully fit the catwalk to the door.Then you need to re proshpaklevat surface and polish it.fiberglass ends, store in the door pocket.

Step 3: the shape and color of a face mount

For painting podium is best to use black or nitro vinyl warmed termovozduhoduvkoy.For sizing can apply glue BF-88.Attach the device should be using self-tapping screws.Careful need to tie at the bottom.Then prepare the lining and fasten with screws to the surface of the door.

See how to make a podium for speakers in the video.

catwalk design for speakers in the house

active people with a vivid imagination always want to bring something extraordinary in everyday life, so they often experiment with interior design.Suffice unusual solution is to create a podium for speakers or any architectural solutions.

Option 1: brick podium

It is called so because of the need plating two layers of drywall, plywood or boards.It features multi-functionality and ease.You can make the drawers.Its design allows the individual openings for communication (cables and pipes).

To ensure reliability and durability, you will need to think about how to make it more stringent.Boarding on the podium of the wood can often sag, because you need to install the legs at a distance of 20-40 cm depending on the height.Place them on the screed or other floor.If you want to house a high podium, it is better to make the metal more durable and reliable framework.

construct wooden and metal sheathe gypsum and plywood sheets.Stack drywall is in two rows without join the ranks.Page Setup must be 50 * 50 cm. In order to avoid deformation construction should leave small gaps in the skin.

between the reinforcing struts for soundproofing put mineral or polyethylene fiber.It is important to leave a few centimeters between the wall and the wooden structure for possible deformation and expansion of the materials due to temperature changes.

Option 2: a holistic podium

integrity is called the one that is created by using a wet solution and, if necessary, concrete and sand-cement covering the entire surface of the perimeter.The advantages of monolithic include its strength, durability and resistance to moisture, and it is easily decorated.

The disadvantages are its heavy weight.In particular, these designs have a lot of pressure on the load-bearing walls and places where there are a variety of communication electricity or running water.To prevent damage to these connections, you will need to make special openings in the design, which is quite problematic.

between the integrity of the podium and the wall must be left 4 cm, so that if cracks do not damage the walls.

wish you success in your work!