Build Daily

Bearing Structures

August 12, 2017 18:08

Assembling the house of SIPs panels - assimilating the experience of the West

click fraud protection

Assembling the house of SIP-panels - the pros and cons

This panel consists of two oriented strand board or OSB, between which an insulation layer is glued Styrofoam.Panel size 1.25 x 2.5 m is standard.The thickness is from 120 mm to 220 mm.

CIP has high strength and is energy efficient.Expanded polystyrene, which is part of the plate, is durable, resistant to biological and chemical environments.Ease of plates considerably simplifies transport and installation of SIP-panels.Operating costs in the facilities of the CIP is much lower.The walls and corners in such buildings perfectly aligned and are suitable for virtually any type of finish.

The disadvantages of sandwich panels include a fire hazard because polystyrene is a highly flammable material.When burned, it releases toxic substances.

Environmental polystyrene as doubtful, because it emits toxic styrene.According to the manufacturers, styrene is detected in the environment in very small quantities, but this material tends to accumulate in the body.

Build SIP panels - preparation for work

This article - a brief guide for SIP installation.Before working best to make sure all the necessary materials and tools for LV installation are available, namely, screwdriver, drill, termonozh, hammer, screws, sealants, polyurethane foam.Also worth a little and protect yourself - the respiratory organs and hands.

Termonozh for SIP panels used in the burning of grooves in polystyrene foam.He works from the mains.

Mounting house from SIP panels begins with foundation waterproofing and installing strapping boards or bars, which serve as the basis for building a floor device.

floor installation , assembly of SIP-panels for which carried out at any time of the year, made both along the axis of the house and across.Plates must be placed on the perimeter of the structure so that the angle of the first corner plate lies against the strapping bar.The panel is attached to the trim screws 240 mm or 300 mm.All joints carefully zapenivayutsya.

Installation of SIP-panels - the main stages

work is now possible to carry out the installation SIP panels on wall.By overlapping attached bar that serves as a guide for future circuit of walls.Through beam and slab are drilled hole, and the whole structure is fixed to the foundation with anchor bolts.

walls are erected, starting from the corner of the house.At right angles to the already installed first panel is placed second, connecting the slot where pre zapenen.The rest of the plates are interconnected by Shipo-slot system and fastened with screws.

Interior walls are installed simultaneously with the panels that form the perimeter.The technological slots all plates must be carefully zapenit.Construction of the remaining floors is the same technology.

After complete assembly of SIP-panels of walls and ceilings, you can start the installation roof.Because the plates have sufficient stiffness and strength roofing system with their use does not require the rafters.Plate rests on mauerlat and ridge beams, installed between the gables, and secured with screws.If it remains unclear how to Install the NIC, the video will help to deal with technical issues.

instagram viewer