Build Daily

What Happened?

August 12, 2017 18:07

After plastering of the walls was all pop - what to do in this situation ?

click fraud protection

Common causes of defects in the putty

In modern apartments more and more people prefer to spend redecorating and leave the walls without wall paper and an additional layer of paint.Caulking is used today not only for the transformation of the ceiling, but also as material to draw the wall.Unfortunately, improper conduct repair operations makes itself felt in a few months.

If the surface begins to "peel off", on the floor are small particles of filler, the reason lies in the fact that the finisher did not keep the temperature conditions at work and causes the composition in multiple layers.If the first layer of putty does not dry, and it was placed second, after some time under the weight of material it will fall off.Wet plaster can leak, clogged in the corners, and crumble when dry.

When applying plaster to a previously plastered wall, not necessarily to carry out time-consuming process of washing and re-repair.It suffices to use bonding adhesive compositions based on resins and they help to "grab" a few layers of finishes and turn them into a single flat surface.

Improper preparation of putty can also cause shedding its fast, do not be too liquid structure - it will leak, but do not turn it into a thick cream - it will be difficult to make a competent alignment and avoid the formation of lumps.To accurately understand, why cracked plaster , you need to remember the time of repair.

How can we avoid the appearance of spots and fraying fillings?

finishers often do not attach special importance of the walls, put new material on top of the old, not caring about strengthening.If you have time and money you can spend to strengthen the surface of the process, for it will need to buy the adhesive composition, for example, Aquastop .

solution elements and save the wall from mold formation on its surface, and other troubles.The unpleasant yellow spots that appear directly on the walls or wallpaper can be a consequence of increased humidity.

As a rule, after the yellow wall putty in the event that a finishing material was diluted without complying with the rules, or the powder turned out to be old.Experts advise to carry out the drying room, and then a layer of wallpaper you need to be removed.

In some instances, yellowness can be washed with plain water, or applying sprays, bleaching surface.Do not paint over paint stains, after all the processes of mold can begin under her bed.

If plaster crack and fall off, you can work with compositions-fixers, they quickly grasp all the details cleaved, collecting plaster cloth into one.If the problem has become very serious, it is wise to begin repairs first, pre-bed on the surface of a special grid construction, it protects against cracking.

How to dilute putty to avoid problems?

Often people ask why plaster bubbles.The answer to this question can be found at the stage of mixing the material.Diluting with water, dry plaster, you can not calculate the proportions and make it too thick.In this case, the material is responsive to temperature changes in the room, and as a result - it will be ugly bubbles.

ironed them is very difficult, so experts advise pay step training materials focus.

also water-based fillers, stains on the protrusion which happens quite often, can not tolerate the addition of impurities.Experts may say that the additional elements make part of a strong and durable, but not always it turns out to predict the behavior of the material on the surface.

Strict adherence to the instructions, work in a visit to the same constant temperature and humidity - is a guarantee of quality repair.So plan repairs during the season even climate regime.

instagram viewer