Cork wallpapers for walls in rolls - like glue right?

Types cork wallpaper

cork wallpaper Available in two types - baseless and paper-based .Background baseless known for their adhesive mixture no.They are created from oak bark, which is crushed into crumbs and finely pressed.At high temperatures, this composition is able to allocate its own resins and adhesives, and all the particles are welded on cooling.This type is rarely seen in DIY stores.

most popular is considered the material on paper.They do quite simple: the paper web is attached cork veneer.At the same shades of wallpaper can be quite varied - from light beige to ocher.All this thanks to the natural structure.But in addition to natural colors, are also found in painted cork wallpaper.

advantages of cork wallpaper

Because they are made from 100% natural materials, have a number of advantages compared to conventional wallpaper.

• has excellent antistatic properties and does not attract dirt and dust.
• allows you to create a comfortable interior in the house or in a public building.
• For rooms with high humidity levels, produced a special cork wallpaper with lacquer or wax coating.
• resistant to mechanical damage.
• not absorb odors and easy to clean.
• provides good sound insulation.
• pasting is carried out in two ways - by gluing cork paper-based method and cork "self-adhesive".

How cork wallpaper paste on paper?

Many portals is a video as wallpaper glue the cork, but we will tell about the process below.First of all it is important to prepare the base to calculate the number of rolls needed to pick up glue cork wallpaper and tools.

• fit and nesting material it is important to dry.
• best glue for wallpaper - specially made for cork.It is poured into a wide container for uniform distribution on the surface of the roller.
• On the back side of the wallpaper glue is applied to the composition.
• Wallpapering on the wall will be made well, if you do it with someone else, as soaked cloth can easily be broken.
• glue cloth method "butt" from top to bottom.The remaining edges around the ceiling and skirting boards are cut with scissors (not with a knife).
• If poorly attached edges, they must be lubricated with a brush and then smoothed with a roller.
• In the process it is important to ensure that no air bubbles are formed.If this should happen, you need to gently pierce them with a syringe and add glue.

Cork "self-adhesive»

Tell me more about the data and cork wallpaper, and how to apply them?They have been applied simply due to the fact that they have a base with adhesive back.It is only necessary to pull out the tape.Only it is important that the surface is perfectly smooth and clean.After the material has been applied on the substrate, it is necessary to smooth the material, squeezing the bubbles.

they are issued in rolls in length of 3 meters and a width of 480mm.their thickness is about 0,2-0,4mm.They have a wide palette of colors and textures.Enjoys great popularity due to the fact that simple to operate and maintenance (easy to clean).With proper care, this coverage may serve you more than 20 years.