Build Daily

Technological Solutions

August 12, 2017 18:07

The house is made ​​of reinforced arbolita own hands: video and photo

click fraud protection

advantages of monolithic construction of houses in arbolita

If you have not yet decided on the material for the construction of its future home, pay attention to the modern material of excellent quality - solid arbolit.Arbolita use in the construction of the building with their hands provide ease of work done.Firstly, due to the small weight when delivered arbolita no problems.Second, a set of characteristics of the material will contribute to the conservation of heat in the building is already finished, frost resistance under severe climate conditions as well as protection against fire.

In addition, monolithic arbolita homes are the most durable and environmentally friendly.

wood-concrete house with his hands

Construction of wood-concrete building blocks in a way similar to building a house from the gas block.However, there is a caveat, which is to use the solution.If foam or aerated concrete masonry can be applied tile adhesive, for the construction of arbolita - the same solution as in the construction of houses of brick.

Ready house of monolithic arbolita

widely used method of constructing buildings monolithic arbolita.To build their own hands a building need to follow certain steps in the work.

Phased construction of wood-concrete house

In the first stage of construction determine how the house will look like and on the basis of preparing its draft.If the future structure will contain the ground floor, then immediately make a monolithic foundation.Otherwise the cost of the foundation tape view.Due to its low weight can be laid easy arbolita foundation on screw piles.Monolithic foundation can not deepen.

If the house project provides for a cap, that at this stage it is more expedient to use brick as the main material.Cap build 50 cm above the blind area location.This will avoid contact with the surface arbolita moisture, which is able to destroy its structure.

After pouring the foundation necessary to expose the formwork plywood boards or metal sheets.After being installed inside the casing reinforcement cages, providing more design strength.Then stacked layers of wood-concrete mass of no more than 30 centimeters, then tamped.For three or four days waiting for a monolithic belt curing solution is carried out the dismantling of formwork, moving it above.

Strengthening the walls of the reinforcement cage arbolita

take the board thickness is 50 mm for the formwork and foundation.The optimum thickness of the walls to create coziness and comfort in the room should not be less than 0.6 meters.The walls are plastered after construction to create the most attractive and aesthetic appearance.

We must bear in mind that everything for door and window openings should be used armored jumper.With these elements you can achieve a high degree of structural strength.The last phase of construction involves the use of solid slabs of arbolita.

Window openings in the building of reinforced arbolita

As you can see, building a house of reinforced arbolita - an easy task, if you do the work in stages.

instagram viewer