How to make a built-in wardrobe compartment with your hands - drawings, diagrams , photos

Built-in wardrobe with sliding doors type today can be considered the most relevant and practical solution for storing clothes and other things in any modern apartment.Such built-in wardrobe can be installed in almost any room of the house, because it can make the best use due to its construction all the free storage space, starting from the floor and ceiling finishing.

Today, many companies offer to buy them ready-made closets or order individually.Of course, it is much more convenient, but the cost of these cabinets, it should be noted, is not small.It is therefore much more practical and economical to make the built-in closet on their own, as they say, with their own hands, so assembly is easy, and below is a diagram and drawings for clarity.Moreover, that conduct such a process is not so difficult if you act naturally, in certain strictly defined in advance algorithm.All that is needed in order to create high-quality wardrobe - a correct instruction, recommendation, drawings and visual circuits and a little inspiration, because the construction of something with their hands - it's always an art.Site repair of the apartment with his hands, it's tried to bring to life.

Make and collect sliding wardrobe with his hands on the drawings and diagrams

Thus, the desire to make a simple built-in wardrobe there - now you need to pick a place for the installation of built-in furniture element.As a rule, in modern apartments for installation of wardrobe discharged all sorts of niches and other depressions, the area which can not be effectively used for the arrangement of other designs.In the event that the available depth design something does not suit, you can additionally use the tools to cut through the gap.

Once a niche where the closet will be installed in the future is ready, and all the necessary precise measurements made, you can begin to plan drawings.In fact, the appearance and wardrobe accessories depends on the personal preferences of its owners, but there is a certain standard, "classical" variation of this piece of furniture.Drawings precisely this closet and placed in the photo below.

It should be noted, that special attention in the course of drawing up wardrobe drawings should be paid to such steps as determining the distance between the shelves, as well as the calculation of their number.It is necessary to mention the fact that since this model has a closet door is not up to the ceiling, the top shelf had to do a little less in depth, in order to ensure to things more convenient access.

Construction and assembly wardrobe: Getting Started

Once the drawings (or simply sketches) are ready, you can safely proceed to the implementation of the task - the epitome of what was drawn on paper.Starting with the best arrangement of the "inner" cabinet, namely, the installation of various shelves.For shelves is best to use the most common laminate light color (or dark, depending on the wishes of the household and the total room design style).

as fasteners for securing the shelves on the wall, it is recommended to use metal brackets and screws.Due to the fact that all the necessary measurements have been carried out in advance all the dimensions under the shelves are already available.The depth of the lower shelves, in our case, was 60 cm, well, the upper (as previously stated) 30 cm Material and sawing can be carried out independently, but it is best to book both on ordinary construction base -. So, will be able to save considerably, because there is no need to buy an expensive tool.

assembly wardrobe inner frame starts with shelves, which is mounted on the floor (it-and serves as a floor), after which the fixed wall cupboard (side boards) to the bottom of the board and the wall with dowels.Then, it is going to structure consisting of two horizontal, one vertical and three crossbars crossbars installed vertically.The main fastening element, which holds the entire structure built-in closet, are metal brackets and self-tapping screws, pre-purchased at the hardware store.

Widget from SocialMart

frame is assembled, it remains immersed inside the niche and fasten the upper shelves on the walls.As a result, we have two department specially adapted for storing outdoor clothing (sweaters, dresses, shirts and other things).In addition, on one of the shelves you can store underwear, and the other three shelves can be adapted to the most varied of clothing (for example, they can pay for his wife's things).Wide shelf, which is located in the enclosure depth, specifically divided into three parts, with a slightly lower depth.At the top of the assembled and made their own hands wardrobe, set long and narrow shelf, where it is very convenient can accommodate all sorts of boxes of shoes, Christmas toys, blankets and other trifles and little-used items.

Installing sliding door cabinet compartment with their hands

After the frame built-in closet is fully assembled and installed in the previously prepared niche, it's time to start the assembly of sliding doors.It should be noted that the fittings for these doors is different both in value and quality, and therefore the best option is a strong "srednyachok", ie hardware, which has a high cost.Of fittings for doors need sets of upper and lower rollers and special rails, handles and other elements.To fill the wardrobe door opening, you can use any decorative mirror.

door itself collected, but because you need to install guides.The first thing you need to pay special attention - it diagonally, which can deliver a lot of trouble.Best of all, as they say, 7 times to measure and cut only once - carefully double-check the location of the guide and only then install them.It should be noted that in addition to the appearance of the hated diagonals during the installation of the lower and upper guide also very important not to disturb the level of installation of the structural elements.In order to facilitate the installation of the sliding door in the guide, you can initially set the upper profile and then simply remove it and install it already with the door - it will make it much easier than if it was put stasis door leaf and guide.

Further, no harm will be re disassembly and assembly design.Such a way, you can determine which system needs improvement, and to identify problems and strains.In addition, a thorough cross-checking assembly process will make it possible to eliminate possible bias door, which is also important for the normal functioning of the cabinet.If

formed an ugly gap between the door and the wall after the installation of doors and a full cabinet assembly, it needs to be fixed.Make it pretty simple - the reason for this problem could be improper mounting bolts securing the bottom rollers on the door leaf.Such a bolt not only performs the function of mounting, but using it can also be carried out this kind of adjustment slots.

In order to eliminate the defect simply using a standard hex, which is used for wrapping konformatov make this adjustment of the bolt so that the crack has disappeared completely.Such a tool can be purchased at any hardware store or market.That completed the installation.

Make a built-in closet with his hands, as you can see, it is a fairly simple process, for which you want to have some too special skills and talents.Just have a savvy, "straight arms" and a set of simple tools that are available at each host, as well as drawings and diagrams of the planned products.Also, do not forget the inspiration, in fact it is the engine of all kinds of new ideas and processes.We hope to produce and build is not difficult, and the assembly will be successful!