Build Daily

Do It Yourself!

August 12, 2017 18:05

How to filter well of plastic pipe with his hands - drawings and video

click fraud protection

There are several types of treatment devices that can be installed in a drilled hole.Most types are quite suitable for the manufacture of plastic pipe, the more so that such well filters are consistent with the requirements relating to such products - compact size combined with high-throughput, compliance with the standards of sanitation, corrosion resistance.

And when you consider the minimum cost (including temporarily) during the manufacture of the filter from the plastic tube with his hands, the advantage of this constructive solution is obvious.As his mount, which take into account - and will be the subject of conversation in the proposed article to the reader.

device filter

filter 1 makes no sense to get to work, not realizing that the result should have.Giving specific recommendations on linear parameters is meaningless if only because all the different sections of the well established in their pipes.

But the design features of the filter you need to know:

  • fastening element to the tube - it is often called "nadfiltrovym site."If used for the manufacture of plastic pipe, the need for such a part is eliminated.Why, it will become clear below.
  • sump.As with any filter, it should be a certain place, which will gradually accumulate suspended solids that have not been inside the pipe.
  • own filters.In this case - mesh.





Note!This filter performs the function of a primary, coarse mechanical cleaning.Its installation does not mean that water treatment is over.

filter complex filter assembly technology feature of this filter (unlike filters for the pool) is that it is not a separate structural part and is made directly to the end of the last knee tube assembly installed in the trunk.The specific model is selected primarily on the basis of soil characteristics and depth of the well.

In some cases, to increase the performance of the filter, you can use a piece of pipe of larger cross section than the main highway that connects with the last bend to him.Or increase the number of perforations, holes dimensions (slots).

Types homemade filters

Slot

From the name is clear type punching - slot in the wall of the pipe.The scheme of arrangement - any (symmetric, asymmetric).The main thing is that they are distributed uniformly over the entire filter area.

How to make

markup. With this clear - it is necessary to designate space for slots.Chalk marker nail (to cause slight scratches) - fit all.The bottom row of slots are usually placed at a distance no closer than 100 mm to the outlet knee.This is due to the fact that during operation of the well will be accumulated at the bottom sludge, which closes the pipe end portion.

What to take into account - because after cutting through the slits of the pipe piece will lose strength, it will be necessary to strengthen the ties.Under them are left untouched radial stripes.The interval is chosen arbitrarily.The main landmark - the size of the holes and the thickness of the walls.

slot slots. «Bulgarian» is better not to use it as the work it requires a lot of experience.The most suitable tool - hacksaw (metal) or a triangular file.It will turn a bit longer, but the precision and accuracy are guaranteed.The length of the slots is chosen according to the pipe section within the recommended range of 20 - 70 mm.

Variant filter structure filter design variant

Installing the filter element. Every foundation is a plastic tube, then it is advisable to put the net of the same material.Fasten it is simple - by gluing, good, compounds that do not dissolve in water is not softened enough.This eliminates the need to deal with the additional statement of collars, different twists, soldering or other technological operations.

What to consider - the size of the cells.How to determine the best?It is necessary to carefully consider the soil that was removed from the barrel in the last instance, with depth.The size of grains of sand can understand what a grid is best suited for high quality filtration.

Installing plugs. water should only flow into the pipe and through the filter element gap.Accordingly, the end of the knee should be tightly closed.What to use, easy to understand - a wooden "chop", for example.

perforated filter

drilled holes in the walls of the plastic in the home is difficult, therefore, as an option for self-production of such a model is used less frequently.The technology is the same, the difference - in the holes.

There are other varieties of filters that can be used in the regeneration of wells with plastic pipes.As such, the individual elements are not mounted.liquid filtration is made through filling - pebbles, gravel (crushed stone).It should only be noted that the quality of water at such purification process will be somewhat lower.But if she did not initially very dirty, then, as an option, you can try.

instagram viewer