Bench in the hall : a photo , on manufacturing instruction

planning interior hallway room, do not forget about such an important element as a stool.It will not only give comfort and completeness of the room.It is possible to store things - umbrellas, bags, products for shoe care.And, of course, the stool will serve as a comfortable seat, which is convenient to put on or take off your shoes.

Types banquettes

Bancettes first appeared in France during the Middle Ages.The French high society used them as padded stools to the dressing table, and in the palaces of this piece of furniture has served the waiting place for the court before taking the royal family.Bancettes performed for the nobility of the most expensive wood, decorated with rich fabrics and fittings of gilt, silver.Later, beginning in the late 19th century, the stools have ceased to be so pompous.

Bancettes in the hallway can be very different species depending on the destination:

• stool with a shelf in the hallway to the drawers, which are located under the seat itself;
• benches in the hallway with storage compartment, that closes the door on its hinges;
• stool for shoes in the entrance hall with an open shelf, which is also located under the seat and close the door;
• stools sofas in the entrance hall, which serve only comfortable seat;
• stool with mirror, shelves and shelving;
• ottomans and benches for the hallway in the form of ottoman.

material for the manufacture of banquettes

Bancettes can be made of very different materials.Elegant look forged benches, but not in the hall, they fit any interior.

Most often this piece of furniture used the following materials:

• tree - the best material because of its environmental cleanliness, safety and reliability, but it is not the cheapest;
• chipboard and fiberboard - one of the most inexpensive and popular materials;
• forged metal - suitable only to a specific interior;
• plywood - often used as a back wall for furniture made of wood.

Selection Criteria

choosing a banquette in the hallway, consider the following nuances:

1. style and interior hallway itself.All furniture must be properly combined with each other and with the finish of the walls, ceiling and floor.In the hallway, made in classic style, will look stool made of wood, the modern style suitable metal, plastic.
2. Color finish also gets to the shades of the walls.Prefer darker colors, they are less easily soiled than light, and easy to clean.
3. in the hallway with a small area, choose a small banquette, so it does not clutter the room.
4. advance decide for what purpose you will use the banquette.If you want to save area, contemplate the shelves and drawers in which to store things.

What could be the banquettes hallway, you can see in the photo.

Bancettes in the hallway with his hands

today in shops and showrooms of furniture just a huge choice on any even the most refined taste.But some like to decorate your apartment or house custom-made furniture, unique.And here the question arises - how to make a banquette hallway with his hands?In fact, this is a snap.Consider a few options.

Bench shoe from furniture board

The easiest way would be to make a banquette of furniture board.Furniture shield - is glued together Planed bars.Most often they are made of wood such as birch, oak, beech, pine, spruce.

So, for the production of stools you will need these materials and tools:

• furniture board thickness not less than 18 cm;
• furniture fasteners - pins, screws for wood;
• Furniture mounting tape;
• screws;
• foam;
• material for decoration;
• piece of fabric;
• glue joiner;
• electric drill;
• jigsaw;
• screwdriver;
• hammer;
• screwdriver;
• roulette;
• sandpaper;
• varnish or paint for wood;
• roller;
• marker or pencil;
• Stapler furniture;
• hinges for furniture;
• accessories.

Bench shoe will look settee with lockers.Dimensions you have to determine on the basis of the area your hallway.

Manufacturing banquettes shoe from furniture board consists of the following stages:

1. Please make a preform.To do this, mark the wood panels and the jigsaw, cut the dates of your details.If you do banquette 3 separation, then you should have 18 pieces: 6 for the side walls to the bottom of the workpiece 3, 3 blanks for lids, 3 back panel and 3 doors.
2. All Templates sure to sand the sandpaper to remove any burrs and roughness.
3. Now you need to connect the workpiece into cubes.To do this using an electric drill a hole in the ends of the pin, and paired elements hole needs to be done on the planes.
4. important that the diameter and depth of the holes coincide with the diameter and length of pins.
5. You can then assemble the blank and make sure everything is done correctly, nothing stands for edge parts.And after that, you need to disassemble the structure, pre-marking the workpiece, so you do not mix them up.
6. Promazhte joiner's glue the ends of the pieces and glue them.To be confident in the strength of the structure and secure it with screws at critical points.
7. Now screw the hinges to the cubes and to the doors, and then connect them.So, you will have 3 boxes with doors.If desired, banquette for shoes can be done without doors.
8. makes a soft seat.To do this, take the foam and cut it to the required size.Then obsheyte resulting piece of fabric using needle and thread.You can decorate the finished mattress fringe, decorative ribbon or buttons.
9. Next you need to connect the box into a single structure.To this end, using screws fasten them to the furniture canvas or piece of plywood that size should correspond to the width and height of the cubes.
10. Cover product varnish or paint for the wood and allow it to dry for a day.
11. Inside the boxes can be installed 1-2 shelves to put more furniture in them.To do this, attach to the sidewalls of the special bracket and install it on their shelves, which are pre-cut from furniture board.
12. When the product is dry, you can put it on a soft seat and fasten the handle to the doors.Decorate banquette cushions for footwear that can sew yourself.

Bench-ottoman in the hallway of an old coffee table

If your house has remained as old furniture, a coffee table, you want to throw away, do not rush to do so.You can breathe new life into it, thereby saving on materials.

So, for you will need the following materials and tools:

• himself a coffee table;
• jigsaw;
• electric drill;
• screwdriver;
• screws;
• pencil;
• sandpaper №200;
• primer for wood;
• paint for wooden surfaces;
• foam;
• sintepon;
• scissors;
• long line or measuring tape;
• thread, needle;
• piece of fabric;
• Stapler furniture with a set of brackets;
• 7 large buttons to match the fabric;
• iron;
• glue;
• decorative elements.

Work on the creation of a coffee table stools consist of the following stages:

1. First we need to remove the countertop.To do this, remove the screws on which it is normally kept.
2. Turn the countertop face down, put upward legs and work out how superfluous, outlining the silhouette of a pencil.
3. then need to be cut from the worktop jigsaw something extra that you measured out.
4. Now grind sandpaper tabletop and legs to remove the old varnish or paint.
5. The impregnated wood primer, and when it dries, apply another layer.
6. Once the primer is dry, you can paint the table top and legs.The paint should be applied in 3 layers and cleaned after each surface with sandpaper.
7. While the paint dries, grasp the production of the soft top.Measure out and cut a piece of foam the size you want.
8. electric drill, drill holes in the tabletop in the amount of 7 pieces, through which you will later make screed.
9. Put foam on the table, and on top of it and a piece of padding polyester fabric that size should be larger countertop 15-20 cm on each side.
10. now mark the place on the fabric where you drill a hole into which need to skip buttons.
11. Sew each button in the place that you have outlined, passing the thread through the hole.Balance thread attach a stapler.
12. Stretch fabric and attach it to the back of the table top by means of staples.
13. to fold on banquette looked beautiful, flatten and straighten them with the help of an iron.
14. Glue decorative element (fringe or braid) to the legs of stools.
15. Now you can fix the upper stools with legs.That's it - stool in the hallway with his hands from the coffee table is ready.

Bench with shelf

banquettes with shelf can be made of the finished shelves or other materials such as hardboard, particle board or plywood.If you are in the presence not have anything suitable, then it will be easier to buy a shelf in any furniture showroom and buy in addition to her other necessary materials.

So, you will need:

• regiment for several departments, depending on the size of future banquettes;
• chipboard or plywood for the base;
• Stapler furniture with a set of brackets;
• jigsaw;
• screwdriver;
• screws;
• foam;
• thread with a needle;
• piece of fabric;
• centimeter sewing;
• scissors;
• plywood crate;
• plywood for soft seats;
• guides for drawers;
• PVA glue;
• sintepon;
• pencil.

Manufacturing banquettes with shelf - step by step instructions:

1. For starters, you can make the head.Its height can be as you like - higher or lower, but you can make it in the form of rounded arches.Cut the chipboard on the shelf width and upholster it with a cloth, using a stapler.Between the fabric and plywood lay a piece of foam to the head was soft.
2. Take a piece of plywood and cut to 2-3 cm shorter than the length and width of the shelf.
3. foam Measure out the width and length trimmed plywood, put it on the plywood and cloth obsheyte this construction is the same as the head.Use a stapler or a needle and thread.
4. now proceed to the manufacture of boxes, which will have to fit into a shelf compartment.Cut the plywood using a jigsaw blank and connect them in boxes with screws and screwdriver.
5. Stud boxes cloth using PVA glue.
6. boxes to freely moved in and out, it is necessary to fix the guide to the offices.Do it with screws and screwdriver.If you have a screwdriver, then take advantage of it, the work will go faster.
7. If you do not plan to move the banquette with a place to another place, it is possible to fix the headboard to the wall.If this is not possible, then secure it to the shelf with screws.
8. shelved soft seat, and in the department shelves slide drawers.
9. can sew a pair of pads, which you decorate a banquette.Use a piece of fabric, thread, needle and padding polyester, which will need to fill your stitched pillowcase.If you know how to sew and you have a sewing machine, use it, it will be much more convenient.
10. remains only to fill the boxes things banquette set into place and decorate it with pillows.

Bench in the hallway that you could do with their hands, certainly will please you more than bought in a furniture store.

Bench own hands.Video