Build Daily

Construction Works

August 12, 2017 18:06

How to nail battens .Step-by-step instruction

click fraud protection

Molded - versatile material that is often used in interior decoration.In the process, there is a choice in what way and how to nail battens.There are several methods of lining installation, which we consider below.

Content

  • Features and benefits of installing linings
  • Species lining
  • Recommendations for choosing a method of lining attachment
  • Tips for calculating the plastic lining
  • recommendations on how to beat a plastic battens
  • How to beatwooden battens
  • Horizontal installation of wooden bunks
  • Vertical mounting wooden lining
  • How to nail battens nailed

Features and benefits of installing linings

Molded - finishing material, which is made from edging boards or plastic.

depending on the lining material is wood, plastic or MDF.

10

Wall paneling used for decoration of internal and external surfaces of buildings.

Wooden wall paneling different characteristics of use.Wall paneling made from pine or spruce is used for decoration with stable temperature conditions.Molded from a linden or alder is used for interior surfaces of the room where there are sudden changes in temperature, for example, bath or sauna.For exterior trim battens used larch, which is not affected by humidity, sunlight and temperature changes.

benefits of installing linings:

1. Batten - a versatile material, which helps to quickly and easily cope with the alignment of the walls.

2. Wooden wall paneling different environmental friendliness, safety and naturalness.

3. Molded plastic is moisture resistant to ultraviolet light and has a wide range of colors.

4. Installing lining - simple and not time-consuming process.

5. Lining, made of wood fills the room with warmth, comfort and natural smell of wood.

6. The plastic lining has good protection from noise and high thermal insulation.

7. Lifetime lining, with proper processing of wood, is about 10 years.

I

Disadvantages coating lining:

1. Wood, from which calls are made bunk applying special coatings that protect from moisture battens.

2. A plastic lining is made up of substances which under heat released into the air.

3. Wooden wall paneling that is not treated with special solutions, eventually losing a presentable appearance and needs to be replaced.

Species lining

Depending on the material from which the battens are isolated:

  • wooden battens,
  • plastic battens.

Wooden battens used for installing both the internal and external walls, structures such as:

  • houses,
  • country cottages,
  • cottages,
  • gazebo,
  • sauna,
  • baths and

etc. The main advantage of installing the wooden lining - no need for preparatory walls:. leveling putty or cement mortar.

8

room in which the wooden wall paneling is the optimum moisture content, as a tree has the properties of absorbing moisture at high humidity and moisture at a reduced impact.

For manufacturing wooden linings use edged boards:

  • ash,
  • beech,
  • wasp,
  • Spruce,
  • alder,
  • cedar.

Wooden wall paneling is divided into four types:

1. Molded "first-class" or "zero class" - from a perfect appearance and lack of roughness on wood.

2. Molded "A-class" - for every 150 cm bunks there is one such bitches, there is also a resin pocket and a few cracks.

3. Lining "in-class" features four knots per every 150 cm, a few cracks and resin pocket.

4. Lining "C-class" is characterized by the presence of resin bags, blue spots, stripes, mechanical damage.This lining has a lower cost compared to other classes.

7

plastic siding used for finishing:

  • interior,
  • facades of buildings,
  • roof overhangs,
  • ceilings.

plastic lining Advantages:

  • excellent quality characteristics,
  • high level of strength,
  • easy installation,
  • original design and appearance,
  • good acoustic and thermal insulation properties,
  • resistance to ultraviolet light,
  • long service lines, which is more than 10 years,
  • ease of maintenance.

plastic siding divided into:

  • laminated type panel that displays a tree structure, metal, granite or marble;
  • monochromatic panels of different colors and shades;
  • panel with or without sutures.

plastic lining - universal finishing material, which is easy to install, has a wide variety of textures and colors and looks good in any type of room.

Depending on the shape of the profile battens are divided into:

  • battens panel type, which is characterized by simplicity and imitation wood beams;
  • Lining - pazogrebnevyh has a deep connection stud size is increased, this lining design provides additional ventilation and vlagoisparenie, Lining is used for facades of buildings;
  • calm-fagonka - used in interior decoration, has a perfectly smooth surface;
  • vagonka- American - different grooves on the inner side and overlapping set, because such connection seams between the clapboard are practically no such lining is only wood and used for outdoor decoration;
  • lining block house is in the form of convex bars and mimics the wooden structure.

6

Recommendations for choosing a method of lining attachment

1. If unsure durable use, or with the possible dismantling of lining should be fixing with capping.

2. When installing the lining in the sauna or a bath, secure the battens with screws.

3. The nails will help to quickly and reliably install the battens in the room, followed by a repair.

4. To install the lining of domestic production, use screws.

5. The best way to install lining, which will help establish quality linings and save time and energy - fixing boards using stapler.

Tips for calculating the plastic lining

plastic linings sold in separate panels, the length of which is 600 cm. To calculate the number of panels to be installed on the ceiling lining should check the perimeter of the ceiling.The width of the lining is 20 cm. For example, if the ceiling height of 6 m and a width of 5 m, it will need 25 panels lining.

To make a frame for fixing the lining, use a wooden block with a cross section 2x3 cm. The standard bar length is 200 cm. Bruce nailed along a six-meter wall.The distance between the fastening bars -. 100 cm at 5 m wide ceiling must be 6 bars, but given the length of 6 meters, you need to buy 18 bars for two meters.

To attach one bar must be 5 screws and 5 dowels.

5

recommendations on how to beat a plastic battens

Tools for work:

  • hacksaw for working with wood - used for longitudinal section of lining;
  • jigsaw - helps make the cross-sectional lining;
  • screwdriver;
  • building level;
  • knife assembly;
  • stapler;
  • hammer;
  • electric.

materials for:

  • screws,
  • dowels,
  • staples steplernye,
  • skirting or profile.

Consider the instructions on how to nail the ceiling battens:

1. Remove dust and delicate trim from the ceiling.

2. Using drills prepare the bars drilled holes for mounting screws.

3. Before mounting the bars should cover them with paint or a special solution that prolongs the life bars.

4. With the help of a hammer drill secure design of the bars on the ceiling.Insert the dowel bars and secure with screws.

5. The boards must be on a plane.it is recommended to substitute the wooden supports under the bars for large ceiling drops to the ceiling was flat.

6. After the construction of the timber is ready, proceed to the installation of lining.

7. With the help of a stapler or fix the profile moldings for the construction of the wooden bars.

8. Insert the battens attached to the plinth.Grooves of the lining attach to the bar with a stapler.

9. Insert part of thorns into the groove of the previous lining.Attach the battens to the frame of the timber.

10. Repeat steps for the subsequent panels.

11. If the last panel is not the same as the size of the ceiling, it should be trimmed and inserted into the baseboard.

12. After installing the plastic linings, a ceiling should be washed with a sponge and warm water.

4

As nailing wooden battens

Preparation lining to be installed:

  • wipe linings before installing,
  • treat the boards with the help of an antiseptic, to avoid the appearance of mold and microorganisms,
  • leave bunk for 24 hours to completedrying,
  • battens cover varnish.

There are several ways that tell you how to nail the battens to the wall:

  • nail strip obliquely to the longitudinal side of the tongue;
  • hammer in a nail clip, thereby strengthening the bar on the outside;
  • on the front side planks set shifted profile that should hammer a nail.

Species fastenings wooden lining:

  • horizontal,
  • vertical.

3

Horizontal installation of wooden bunks

Wall paneling to be installed from the ceiling, and then gradually move on to the floor.This installation will not allow the accumulation of water or debris in the grooves of the wooden lining.

Setting lining using klyaymerov occurs by installing boards in sequential order.Lining is fastened to the frame by means of nails or screws.

Tip: To perform a quality installation of lining, should check the evenness of the wall every half meter.

Before fixing the last board should fit it to the size of the hole you want to block.This should be done using a circular saw or a hacksaw.After fixing the skirting boards installed.

Setting lining that mimics the logs, produced by the installation of boards located groove to the top.With the help of a hammer and cutting panel boards egged each other.Thus, it is possible to hide the joint gap and space.

boards such lining is attached to the frame rails, using the screws, at an angle of 45 degrees.Caps screws hidden under successive boards.For decorating a corner of installation of the lining using treated lumber.After work, lining the surface is cleaned of dust, and paint as desired.

2

Vertical mounting wooden lining

1. Vertical installation should start lining from the corner position.On the back of the groove plank fastened klyaymery.

2. The first board shall establish and fix the nails, hats which covers the decorative area.If there are no corners, use side cutters, for getting rid of hats.

3. Molded mounted in such a way, as in the case of horizontal installation.Sequentially one after the other plates are fixed to the frame.

4. The last plank nailed with nails.Then install decorative slats to improve the visual appearance.

5. When the ceiling paneling with a wooden lining, work should start from the window to the opposite wall.This installation allows you to reduce the number of shadows that appear between the boards lining.

6. For longer use wooden bunks should be once in 1.5-2 years to carry out preventive treatment of wood antiseptic, fireproof and watertight solutions.

1

How to nail battens nailed

This method of installing linings is reliable and durable fastening.The disadvantage of mounting lining with nails is the possibility of damage to the lining surface of the hammer.

When installing lining whose width is 10 cm, and a height of 2.5 m must be used at least 6 nails.

for fixing lining should make a nail into the groove of the board and as accurately as possible to score in the fixture.Dobojnika help deepen the nail heads.

This method is relevant in the event that additional room wall decoration will be carried out after the installation of lining.

instagram viewer