Build Daily

Types Of Jobs

August 12, 2017 18:08

Cheap and cheerful - plastic linings for exterior

click fraud protection

Material characteristics

Initially linings used in the plating of railway wagons, hence its name.Externally, it is a simple board with a smooth surface and fixing slots on the sides.However, this material - it's not just a message board, and the element with individual cells inside.Due to this it has good sound and heat insulation.The starting material for the production of PVC is used, because of which the lining has a number of distinguishing characteristics:

  • Durability - the material does not rot and retains the appearance of many years;
  • resistant to temperatures from - 50 to + 50 degrees;
  • not damaged by UV radiation and atmospheric influences;
  • Fire protection;
  • Resistance to moisture;
  • Large selection of colors and shades.

Lining for outdoor work also has its drawbacks.Its main problem is the low strength.The surface, which it is sheathed, is not able to keep to yourself decorative elements heavier than one and a half kilograms.Also on the bounce on the surface will remain dents and holes.However, the price of this stuff is very affordable, so replace the damaged item will not be difficult.

Note!Molded PVC for outdoor use is not recommended for use in areas of intense human flow, as increasing the chances of damage to the surface.

Molded plastic for outdoor use - why is it?

many positive qualities of this material may influence the decision to sheathe clapboard outside the building.

Firstly, it is made of PVC, whereby a glossy surface, it requires no further treatment and impregnation as for wooden panels.It is also an important factor - it's reasonable price.Presented panel in a wide choice of colors, including imitation wood, which allows to implement any design ideas.Secondly, due to the special grooves there is a qualitative and quick installation.

Important!For installation requires a perfectly flat surface and organization of channels for routing communications.

addition, the material is resistant to moisture, rot or corrode.Note that buying bunk, you must check whether it can be used for the exterior.This is due to the fact that the material is composed of a special ingredients that improve its resistance to frost.

Mounting panels

lining Installation is carried out in the pre-assembled crate.Mounting should begin with angle and lead it along the wall.The first panel is fastened with nails, hats which you can then close the decorative area.If decorative slats not, to bite off the cap side cutters.

Note!If installed will be wooden slats, you should think about what process the battens on the outside to protect it from moisture.

Then all the panels are inserted into the slots, and fasten.Last strap, like the first, is attached with nails.For completeness appearance at the end of the decorative elements are mounted, and which cover the corners of the junction with the walls of the foundation.After that, if you wish, you can decide what to paint outside the bunk.No additional protective properties of the coating does not add material, but it is possible to perform the original coloring, or even make a drawing on the facade of the building.To do this, be sure to use a moisture-resistant and sturdy paint, for example, acrylic or lacquer.

instagram viewer