Build Daily

Floors

August 12, 2017 18:07

How to tie a laminate or anticipate the whims cover

click fraud protection

Relationship coated or where to begin laying the laminate?

As laminate flooring has long won a strong position in the construction market of the world.Is no exception, and Russia, where he confidently pressed once so popular in our linoleum.Compared with the last laminate has several significant advantages: ease of styling and ease of care him, ecological and attractive appearance.

Quality coating is not afraid of scratches and loads, does not form indentations from furniture and heels.Truly endless options decor: marble, wood, stone and tile.And it is quite amazing variety of colors.

laminate consists of several layers.Stabilizing the lower layer is designed to increase rigidity and protection against deformation.The carrier layer is made of HDF - high density fiberboard.In it cut the lock to fasten the boards to each other, and that it affects the water resistance.

next layer - a paper with the corresponding pattern, and he plays the role of decoration.Finally, the top coat of melamine or acrylic resin boards intended for protection against abrasion and impact loads.From it depends on wear resistance, four classes that are marked as follows: class 21 and class 23 - for home use, and classes 31 and 34 - for the commercial.

Preparation for laying laminate flooring - study object for

When choosing laminate should pay attention to a few basic parameters, which subsequently will be decisive.The first is water resistant.If moisture gets into the seams around the covering irreparable damage - board deformed and can not be repaired.

To avoid this, buy a waterproof version of the process or carefully glue joints are water-repellent.

The second thing you should notice is the noise isolation.On sale there were some kinds of laminate with a sound-insulating substrate glued.If not, before laying the screed need to pave a special material.

also need to be defined and boards fastening - it can be either a locking adhesive.Click connection reusable and allows replacement of boards in case of deformation.And one thing to remember when choosing a laminate - for underfloor heating are suitable only labeled appropriately grade material.

How to tie a laminate - proceed to the preparation of the base

Laminate is extremely sensitive to the quality of the base, which it covers.All sorts of projections and distortions create conditions for corruption interlocks.Hence it is clear where to begin laying a laminate - with careful preparation of the concrete surface.Self-leveling -

level should be recognized for its mass-leveling screed is under laminate , and its most reliable option.Before starting work, carried out general cleaning as dust and dirt hinder better connection with concrete mortar.Very desirable prepares the surface of the vacuum.

After that you can start small repairs - adhesive for tiles repaired small chips and cracks.And although the screed under the laminate itself to cope with this problem, it is better to perform this repair separately.After the floor surface is repaired, it must be primed deep penetration.

Further preparations for laying laminate is reduced to pouring the floor self-leveling screed, for which the cooked mixture is poured, in order to accelerate the spreading staple smeared on the floor.For final alignment has a special roller with spikes, which is rolled out and lying on the floor-leveling mass to form a perfectly flat and smooth surface.

instagram viewer