Production IG on video easy and simple

Advantages of glass

Production IG in the video shows how the action takes place after the fact, in the sequence, and technology, but first it needs to make some decisions.

1. Determination of raw materials for float glass.There are two types: standard - quartz sand and original - cullet.
2. furnace for raw materials.It varies depending on the temperature setting.Of course, there are domestic and import manufacturers.Where is the first such company - JSC "Steklomash" (Orel) and ZAO "Nakal" (Solnechnogorsk), and the second - Cklopenliberic SA (Czech Republic) or Cieffeforniindustriali (Italy).Also, needless to say, have imported produce greater costs and maintenance costs.So that salaries for the purchase of such devices must be 1 or even 5 million. Rubles.

production differs such advantages:

Plate glass is not as valuable as the finished product out of it.As already mentioned, there are large enterprises that manufacture a large amount of glass.Price entry manufacturers the "club" of 150 million. Or $ 114 million. Euro.

Often these manufacturers prepare windows for individual enterprises for the production of windows.

Forms Production IG

Divide:

1. small company - no more than 50 of glass per day.
2. medium-sized enterprises - not more than 500 per day of glass.
3. Automated company - no more than 1,000 One unit.

workers ingredients:

• Glass material
• Frame
• absorbent
• sealant

technique to create windows and the relevant conditions

Stages:

1. Preparation of materials thatIt includes glass cutting and cleaning the cut parts.Cleaning takes place by hand or automatically using washing devices.Kit consists of a sink of glasses:
   • Section produce glass.
   • glass innings in the sink.
   • Semi-automatic assembly of glass.
   • finished products acceptance service.
   • insulating glass tilter.
2. Direct mounting.It implies carved spacer, the sealant is applied to the frame, and its connection with glass.Sealing is achieved by half-board application of the sealant.The second layer is applied to the end of the glass.This sealant may also act silicone.Apply using thiokol-extruder and hands.Do not use this adhesive tape because it is proved that they retain moisture in the pane, which is extremely detrimental to the operation window.
3. Fixation.There is a special two-component one or sealant, which must be sealed and connected to the frame glazing.It is also important to dry the entire product, so is made a thorough inspection of glass for dust, the excess amount of sealant and the continuity of the sealant layer.For drying, glazing often placed in a special box, where air circulates freely, allowing drying of.

And here is the video of how to set up production of glass video.

calculations technique

Cutting can be performed on a semi-automatic table Mastercut-3.2, which is an example of 25-30 thousand. Euro.There is also a table attached to this worker.In order to clean the glass, you need special equipment for cleaning water filter, which is estimated at 20-30 thousand euros, and the filter -. 2-4 thousand euros..Also, the employee is required for product washing process.

Good luck in your new installation of plastic windows!