Shower tray with your hands - how to install without professional help ?

Variety of pallets and features of their operation

As is known, in addition to saving space, the wide range of functions, such as carrying out procedures whirlpool, steam generation, aromatherapy accompanied by music, and others, made booths and corners extremely popular with consumers.Also offered in the retail network samples are designed for a variety of possible purchaser purse.Mounting and installation of booths may be made by invited forces, knowing how to properly install the shower tray and the rest of the equipment.

designs are different.Perhaps the most expensive and durable, after the marble, are made of cast iron pans, followed by steel.They, too, are durable, have high strength reserve.Differ high decorative ceramic trays, they are expensive and are afraid of mechanical influences.The most common pallet made of acrylic materials.Under the weight they sag, so have a special frame mounting brackets, adjustable legs, other valves, through which ensured proper installation of the shower tray.

Common acrylic pallets without the support for the base and the central portion, and not only the perimeter, can not withstand the stress and crack.Especially if in a rush to try to take a shower or bathe are not alone.

Therefore, regardless of whether the installation fulfills the shower tray acrylic friendly team completely sober zhekovskih plumbers, or the actions he carries out the happy owner of a shower cubicle (corner), strengthening the foundation set by the pallet should be given due attention.If the complete base frame legs have only the extreme, you can try to make such a support independently.Fortunately, their design is not complicated.Suitable length of steel pipe, box-shaped tube of appropriate length with the obligatory rubber gasket.

Features installation of acrylic tray

If you are installing the shower tray with your hands, you need to pay special attention to alignment and adjustment of his legs.They must be set in accordance with the features of the floor.Equipment assembly work is described in detail in the attached to the cabin and corners instructions.But in the most general case, it includes the installation of the pallet (plastic or metal trough), connection to drain it and display it in the sewer.

Depending on the design and installation of assembly kabinochnyh doors and walls (if any) may include mounting plumbing and electrical connections.At the end of mandatory screening starts and adjustment modes for multi-functional units.To determine the correct installation, you just need to stand in the pan gently.Cracking and sagging show shortcomings.A simpler way is to install the shower tray will be supporting the use of bricks at its base.

In this case, the level of pre-exposed pallet, you can even put the bricks on the solution, thus providing additional strength of the pallet.

It should be remembered that the neglect of the installation described measures may require to make repairs of acrylic shower trays.It is likely in the event of cracks or dents.Of course, cause a defect acrylic trays possible, even hanging a shelf in the bathroom and accidentally dropped it in the hammer (as an example).

On the other hand, the repair of the shower tray, if necessary, can easily be performed using pre-alignment and enamel bath, glass fabrics and epoxy filler or mastic, etc.But the look will lose appeal.And the additional cost would be the real amount.

Installing other types of pallets with their hands

The use of marble, ceramic and iron pallets are not so common.However, the installation of the steel shower tray is also quite popular.Very often such installation is carried out without the use of walls and doors, limited protective shutter.This is definitely a very economical option, but in this case need to wall cladding sides use seal and the seal section.

Thus, as acrylic, steel placed on a metal frame (in this case, pay attention to the strengthening of the base of the trough) to the plastic support elements, just on the bricks.There are other options as to fix the shower tray.For additional insulation and sealing base in the space under the tray trough can be blown foam.Keep in mind that it will add the complexity of the repair or removal.

for installation and mounting lockers, pallet corner, or simply do not need a special tool, it is fairly standard installation (screwdriver, hammer, pliers, etc.) and sanitary tools. as sealants should be fine silicone compositions.

In this article you can also find detailed instructions on how to install the shower pan, video format, representing the stages of the whole process works.Moreover, if you wish, you can learn how to make the shower very high quality pallet of bricks, cement mortar, tile and other materials, and try to implement it.