Frame houses from SIP panels - worth venturing a building ?

Prefabricated houses from SIP panels - fiction or reality?

most popular SIP panels are at carrying out rapid construction.All of these materials are selected depending on the wall or roof panels are used in which direction.With their help it is possible to carry out installation and create a finished house from SIP panels in a matter of time.

This possibility became a real revolution in the construction industry.In the panel several times reduced the time of delivery of the building.In various cities, you can now see a pre-fabricated buildings, which show the financial benefit and the rational use of this type of construction.

All prefabricated houses from SIP panels have advantages and disadvantages.Among advantages can be identified as follows:

• good indicator of thermal insulation and soundproofing;
• construction is carried out in any weather and does not depend on the temperature;
• terms of repair or construction of minimal design;
• additional finishing is not necessary;
• easy to transport;
• price is low compared to peers.

Cons :

• in case of damage to restore the integrity of such a plate is almost impossible;
• additional load can withstand bad;
• places panel connections can freeze (used sealing tape).

Frame houses from SIP panels - especially the construction

Today, more than a simple manufacturing process became sandwich panels and thanks to all the imported and high quality equipment used in the production.Production takes place by gluing steel sheeting using a special adhesive.

Recently, the country appeared cassette panels piecemeal assembly, which can be installed at the site, and do not need to use glue.Especially popular they become, when the frame houses are built of of SIP-panels.By the way, they are in no way inferior to traditional buildings in question finishes.

On this wall you can mount any decoration material, regardless of whether it will be facade cassettes, trapezoidal sheet or other options.

Given the relatively small weight of the panels, the foundation under the house, you can do and not very deep.The very construction of the wall is on the pre-assembled frame, consisting of two mirrored parts - external and internal.To the outside, and will be fixed panel, so use more massive lumber - 50h150 mm.

houses Exterior cladding is varied.To sheathe the walls, apply all sorts of materials, including siding, fiber cement boards, cement-sand tile, magnesite stove, exterior plaster and more.Such construction is also called the American House of SIP panels, because the technology just came from that part of the world.

Canadian House of SIP-panels - the fastest way to create a single-storey dwelling

Not paying attention to the fact that using SIP panels can be built high-rise buildings, the population most popular single-storey house from SIP panels.This building contains the basis of the carcass structure is made from coniferous trees.To provide the best insulation, floor beams are used, which are designed to accept a large load.Such

Canadian House of SIP-panels (the idea of ​​such buildings appeared in this country) can boast a good thermal insulation parameters.Often based on them are built energy efficient homes that are properly carry out their duties even in the most demanding climates.There are kinds of single-storey houses without an attic with her.

Using sandwich panels in the regeneration of the attic, you can avoid heat loss without the use of special materials.The exception may be only construction in severe climatic conditions, where the need to use additional insulation.This will help prevent freezing surfaces, and keep warm.