Septic own hands

Autonomous sewer system can process waste drain easily.Installation of a septic tank for sewage treatment can be performed on any part of the house or near the private dachas.Install the septic tank with your hands is not difficult, but you need to take into account the conditions of preparation and selection of the best elements of the system.For example, many owners of private areas prefer Tapas septic tanks.Products are easy to install and in many ways superior to standard concrete septic tanks.

The principle of septic Tapas

Arriving at the stationwastes are first rough cleaning.By means of the air lift (pump) for transfer of the prepared liquid in the compartment with active bacteria.They allow you to completely recycle waste water and make it safe for the environment.After treatment, the water flows to the next compartment, where the squat mud (it is necessary to periodically clean up).After several repetitions of the procedure the water enters the 4-th block, which contains the fully purified water.When it rises to the level of dumping (a special tube) it happens to flow into the drain well.

Benefits

Before considering conventional septic tank for questioning without pumping, consisting of concrete rings, you need to consider the quality of the water networks.Purification in septic tanks of concrete rings produced by aerobic processes and by the fluid flowing from one well to another.Septic Tapas working effectively, according to the principle described above, and therefore will decide the problem of cleaning the waste drain.Conventional septic tanks may not work in subzero temperatures.But the main disadvantage of the design will be its lack of tightness: in violation of the connection between the elements of the waste will fall to the ground, thereby severely polluting the soil.Besides installing concrete rings is costly to prepare correct cleaning pads, and bonding structure collection of individual elements.

Septic Tapas completely eliminates the problem of tightness single design eliminates the possibility of falling into the waste land.A septic tank installation takes a minimum of time.The product works correctly in all weather conditions, and thanks to a special scheme of internal components ensures quality drain cleaning to sanitary and acceptable standards.The purified water can be easily used for watering the infield.Therefore, before you learn how to do a septic tank with your hands, you need to purchase a product that is suitable for the quality of the conditions of reliability and ease of use.

Step by step instructions for installation of a septic tank

or install a septic tank need to begin only after careful preparation.This will require earthworks: excavation pit at the station well and digging trenches, which will be installed drainage pipes.To speed performance is recommended to use the services of a small excavator.After completion of the need to solve the following problems:

1. I Create a sandy base in all trenches, taking into account the degree of slope of the discharge sewage to the purification plant.

2. Perform the installation of sewer pipes (UPVC pipe flare is used, additional insulation material is carried their Energoflex, resistant to low temperatures, moisture).

3. On-site concrete rings, a special pillow.It consists of a geotextile and the gravel layer.The use of such materials will allow to prepare a drain pit through which will be distributed in the soil purified water.On a pillow placed concrete rings (sealing them in this case is not needed, because the well is not for the accumulation of water and its diversion for).

4. Under the very station Tapas harvested pillow of crushed stone.On it is installed a septic tank, then it scans for the evenness of the structure assembly.After installing in a pit station and its subsequent filling with sand.

5. Next is the pipe dock with the station biological treatment.Using polypropylene solder connection is made to the station of sewer pipes.The connections must be airtight.

6. The final stage will connect the station to the power supply system (a separate machine).It is used to supply a three-core cable plastic corrugation.Further carried out the compressor installation and commissioning of the station.

Using the above instructions, photo and video reports will not be difficult to install a septic tank with his own hands for a private home.But the artist is worth remembering that during the work to follow the exact algorithm and quality control of each stage are required.This will allow owners of private grounds to hold the correct and safe installation of the biological station.

Video installation of a septic tank with his hands