Air oven homemade

design of bath furnace

As such furnaces have a number of disadvantages: increased fuel consumption due to rapid cooling of the metal, uneven heat distribution from the oven, as well as the availability of specialized equipment for the manufacture of construction.

• The furnace, which burns fuel
• blower used for the appearance of traction and the accumulation of ash
• reservoir rocks, which are cooled
• irons made of cast iron, where the fuel is directly and burned
• water tank located abovestones
• pipe for discharging smoke

stove manufacturing process for steam

to produce stoves home-made, it is necessary to have available large-diameter pipes or metal sheets, the thickness of which must be at least 8 mm.Pipes are more suitable material in order to make the stove as weld metal is quite difficult.

diameter tubes used should be more than 500 mm.For the next phase of the two pieces of useful length of 900 mm and 600 mm.Because of the long portion will be made firebox, ash pit and the tank, and of a short - heating water tank.

To produce ash pit, the bottom section of pipe is a hole that settling small door.The air needed to keep the fire will go through it.

Over podduvalom furnace is, the bottom of which is formed grates, which are on the stands, is welded directly to the pipe.Furnace also desirable to provide a door, wherein the material thickness can be 2-3 mm.

located above the tank, which contains stones.To the bottom of the tube is welded from steel, there is a hole for the chimney.The very carefully welded pipe to the bottom in order to prevent the penetration of smoke into the bath room.

heating water tank

From pipe length of 0.6 m., Which is hermetically welded bottom and is made with a hole similar to the fixed chimney is the tank to heat the water.This design is equipped with a cover which consists of two parts.Just to the wall of the tub faucet attached to drain the hot water.

The finished product is in the steam room or waiting room.The second option is more convenient to use the oven itself.It is important to remember that if the walls in the bath wood, their distance from the stove should be more than 1m.As the oven must be placed on a stand of concrete.

Air oven homemade - the most cost-effective solution for saunas, because they are the simplest in construction and operation, have a small cost and weight advantages.