Instructions for installing mosquito nets to plastic windows with their hands

Sometimes, changing the windows in the house, people are trying to save on the little things.Install mosquito nets on the windows, in general, is considered excessive.But with the onset of the hot and humid summer, the mosquitoes attack, flies and other insects convince the inhabitants of the dwelling in the opposite - to be protected.To restore the comforts of home in this case need to install a grid for plastic windows with their hands.

before taking self-installing mosquito nets for plastic windows, must be ordered from the manufacturer itself grid, of which a great many today.Different models and nets, whose price also varies.Select, at its discretion, the main thing - the right to take measurements.The grid size must be equal to the inner dimension of the window plus margin of 2 cm on each side for mounting.

Tools Required

1. level (up to 50 cm)
2. Pencil drawing markup level
3. screwdriver or a screwdriver to fix the grid on the window, arms, etc.
4. Small screws (2 cm)

Mosquito nets are different purpose, design, appearance.To start, you need to understand what are mosquito nets and how they differ.

Features mosquito nets for plastic windows

1. protection from flying insects.
2. Protection against street garbage, leaves, dust, etc.
3. protection from accidental loss of pets from the open window.

Types nets for plastic windows and how to install them

Framework removable mesh

This model consists of an aluminum frame, the frame, connected with plastic corners and, in fact, most grid of fiberglass sandwiched in with the help of the framepacking cord.These removable mosquito nets are placed in plastic boxes with the outside, do not prevent opening-closing valves.The grid is bisected by a horizontal bar to give greater rigidity.By sealing cord fixed plastic handles simplify the installation and removal of the structure.

Installation Framework removable grid for plastic windows

1. Make markings with a pencil, putting moskitki section width (1.6 cm) from the outer edges of the outer window frame.Spend a continuous line connecting these marks.On the lower level mark will be attached two smaller arm that must be packaged with the grid.
   
2. From the top line markings aside 1,2sm up on both sides.This will be a place for mounting two large brackets.Such padding ensure a comfortable grid installation in the future.
3. Screw using the screwdriver and screws the lower and upper brackets (or corner).
4. Insert the mesh in the upper mounting, carefully pull it out the handles on the sides, and lift.Then please create a grid in the lower corners and the lower the structure down.

grid for plastic windows "antikoshka»

Grid, designed specifically for the protection of pets against accidental loss, mounted on plastic or metal brackets.Frame "antikoshki" made of the same aluminum.Cloth black may be steel, aluminum and polyester with PVC sheath (the most popular).Nets fitted with several impost (reinforcing bars).The process of installation of special protective fabrics identical to installing the frame grids.Only the mounting need to choose steel because the plastic can break if the animal will jump to the window.

Rotary mosquito nets

These nets are usually put on the small screen.With their main ustanovke- attach the magnet and canopies.The process is sometimes complicated by the non-ideal installation of plastic windows themselves (failure to comply with the level of installation of the window can lead to distortion and mosquito nets).

Set rotary mosquito nets

1. Measure with a tape on the frame in place of the alleged fixtures sheds its width (2 cm) + width of the aluminum profile mesh (1.6 cm) = 3.6 cm, carefully rechecking the data sizes inavoid distortions.Put the corresponding pencil marks.
2. Fasten magnet in the middle of the window, sticking his or screwing screws.
3. set appropriately magnets mosquito nets.
4. Check structure for opening and closing.

Roll mosquito net

most popular, but the most expensive model.Such mesh design principle shutters, twisted and held in that position by a cord or a handle and a roller winder.Cloth mesh tight to the frame than effectively protects against the ingress of small insects.These nets are appropriate in the event that you do not have space to store things.After all, they can be hidden in an aluminum box mounted at the top of the window opening.Roller mosquito nets have a frame and snap the retaining strap.

Installing roll mosquito nets

1. Remove the grid frame, exposing the space fasteners.
2. Apply mosquito net to the window, check the installation site, screw.
3. Remove the cover from the retaining strap by moving it up and down to find in attachment.
4. set the bar even around the perimeter of the window.
5. Start grid with twisting arm.
6. Close the bar cover.

Now you know everything you need to know to install mosquito nets to plastic windows.Be of good cheer!And you comfortable summer!