Finishing openings of doors with their hands

Finish doorways - is a relatively new trend in interior design that is dictated by the desire of homeowners arrange accommodation in an original way.

opportunities to realize a great variety conceived today as the construction market is filled variative finishing materials.And all that remains is the owner of the house - to show a little imagination and perseverance.Design tips in this article will help determine the design idea of ​​the doorway, to move away from the banal notion of "casing-door."

choice of the form of the opening

Experts distinguish several forms of finishing openings doors.To decide on the best option, you must take into account the height of the ceiling in the room, the style of the interior in the room, the width of the doorway, and so on. Some of the design harmoniously look only in the low areas, but for others it is necessary to expand the space.Let us consider in more detail the basic shape of the opening for the door.

portal

This design is the easiest to implement, since it implies an opening in the "U" shape of the letters.Often, for the implementation of this form is necessary to completely remove the door leaf, box dismantle, clean all the structural elements on the surface finish and execute by any method.Most often, homeowners are using:

• wooden materials;
• plastic panels;
• stone;
• polyurethane moldings;
• clinker.

in this form will be harmonious look any decor.In addition, the portal is an optimal solution for the finishing of the door opening without a door, which serves as a connecting structure.

Arched design

This is the most interesting form for the doorway to the design point of view.In addition, the arch has a wide variation of performance decorative and wearable openings in the narrow corridors of the home.This form allows you to visually expand the space, "facilitate" the interior and give it originality.

Among the most popular ideas for the decoration of arch can be distinguished are:

1. classic form - this option is suitable for rooms with ceilings, which reach heights of over 3 meters.The correct radius of the opening should be equal to half the width of the entire recess.For example, if the width of the door leaf is 90 cm, while the arch will occupy at least 45 cm from the top edges of the structure.
2. arched opening in the Art Nouveau style - is the best option for the finishing of interior dveri.Pri opening such a constructive solution of the bending radius must be greater than the width of the opening, and corners can be executed as sharp and with rounded edges.
3. Romance - a kind of arch arch has a direct in the middle of the opening, which is rounded off at the edges of the structure.Thus, it resembles the portal, only a delicate, smooth edges.

There are also other forms of arches, which are less popular and more labor-intensive by: asymmetry with an emphasis on one side, trapezoid, ellipse, etc.

way to finish the opening

after.how the homeowner decided on the form of the doorway, you must choose a suitable decoration material and decoration style.It should take into account the harmonious combination with the overall design of the room, as this is a continuation of the design style of the interior.Consider the most interesting ways to trim.

Stone clearance

This option finishes doorway entrance dveriyavlyaetsya the most popular among home owners.This is logical, because the artificial or natural material has such advantages as:

• a wide variety of decorative elements;
• high resistance to mechanical and chemical influences;
• originality and the ability to experiment with different types of material;
• versatility as a stone in harmony, both with opening the front door, so and interior designs.

finish principle this material is similar to laying technology tiles.The only difference is that the stone is not required to use a special adhesive composition, which is prepared from a dry mix and water.For stone decor can be used "liquid nails" glue or sealant, which can be purchased at any hardware store.

opening the door trim artificial stone is done in the sequence of actions:

1. Initially, you need to prepare the surface.To do this, remove the remnants of the old topcoat, align existing irregularities and indentations, and zashpatlevat cracks and wall defects.
2. You can then proceed to the primer surface treatment, which will increase the adhesion of glue and wall coverings.
3. Pre-lay and group decorative stone tiles, the material was ready to commit.
4. If some parts do not correspond to the size of the opening, cut them and oshkurte edge using coarse sandpaper.
5. Then apply glue to the wall.If you use an adhesive composition of the "liquid nails", then it is applied directly on each stone tiles.
6. attach stone to the surface and press firmly by hand.Starting work should be from the bottom corner of the opening.If the door is opening, then it is necessary to step back from the edge of a width which later takes casing.
7. If the door leaf in the construction is not provided, then in the corners of the slope stone tiles Apply a maximum close to each other.
8. Depending on the type of decorative material can leave or not to leave gaps between the fragments, which are then filled with grout.
9. At the end of the process of processed stone elements with a stiff brush to remove excess mortar and dust.

Technology decorative stone laying is presented on video:

trim plastic panels

as decoration doorway suitable decoration material such as plastic panels.They can mimic a variety of tree structure, stone, marble, and have a wide variation of colors.Decorating opening panels allows us to emphasize the severity of the outlines of the opening, creating a contrast with the interior decoration of the room's walls.

Other features trim panels include the following:

• visual extension of the doorway and lift the ceiling;
• material is practical to use, easy to care for them and clean;
• panels have a long life, and are not exposed to mechanical factors.

fastening technology plastic fragments beskhlopotnaya enough.To fix the panels must be:

1. Conduct a pre-cleaning surface.
2. Process primer opening.
3. then applied to the desired part of the wall "liquid nails" and press tightly against the panel arms.
4. Wait until the glue has dried and cleaned with a dry cloth the excess composition.

Making polyurethane moldings

No less popular method of decoration doorways with their hands is decorated with stucco.In this practical embodiment is a polyurethane composition which is externally identical to plaster, but it is more practical and tough.This finish is appropriate for the design of wide doorways, especially in rooms with high ceilings.Among the other advantages of the material can be identified as follows:

• practicality in operation;
• ease of care;
• versatility for finishing any surface;
• opportunity to paint in any color.

Important! worth carefully calculate the dimensions of the decorative elements, if the finish is carried out in a narrow room.Otherwise, the stucco may clutter and "heavy with" space.

finishing ceramic tiles

often finishing internal openings dvereyproizvoditsya using clinker.This material is commonly used for outdoor decoration of the facade, however, to create a certain style ceramic tiles can be laid around the interior doors doorway.Among the main features of the material it is worth noting the following:

• clinker is extremely resistant to the effects of physical and mechanical nature;
• has a long service life;
• no need to care for.

Thus, with the help of decorating the doorway can be given a living space of originality and make a reality of bold ideas.Stick to brevity in the decoration and consider the options of space to make the most practical and aesthetic opening.