Dimensions booth for a German Shepherd and stages of construction

How to build a booth to Shepherd - choose the location for the enclosure

choose the site for the enclosure in place, quite remote from residential homes, commercial buildings, drain wells, roads and toilets.Ideal small hill, protected from the wind and the scorching sun garden trees and thick shrubs.Do not include a shepherd along with other pets or near the stables, pigsties and premises for poultry, as unpleasant odor adversely affects the health of the dog and it is working.

lodges are of two types: classic and upgraded.The familiar and common option - a one structure.Another type of dog kennel is a room with a vestibule.Booths for Shepherds with their hands most often built on the second version and is considered the most appropriate for its content.

materials and dimensions of the booth for German Shepherd

most suitable material for the construction of high-quality pine wood is considered.High-quality booth for Shepherd, the dimensions of which are listed below, collected from bars and sheathed with plywood.Site joints are sewn by a narrow plinth that reliably protect against deformation of the material.Next, consider how to build a booth for Shepherd, in which it will be warm and cozy.In order to properly determine the size of the structure, you need to take your measurements with a dog:

• measure the area which it occupies during sleep - this is the minimum size of the booth;
• withers height serve as a benchmark to determine the height of the kennel.

Experienced breeders are recommended for the construction of booths for German Shepherd adhere to the following sizes:

• width - 1350 mm;
• depth - 1000 mm;
• height - 950 mm.

manhole Dimensions:

• width - 400 mm;
• height - 600 mm.

To build a wooden hut used by an ordinary carpenter's tool that exists in any host, namely a hammer, hacksaw, measuring tape, chisel, screwdriver, carpenter Area, screws, nails.Next, we describe in more detail, how to make a booth for Shepherd .

How do aviary Shepherd - technical advice

you already know from the previous text that you need to build high-quality pine sticks from which the frame is constructed.Plywood paneling, it is desirable to do on both sides.

As the insulation is best to use foam.Gender stack of sturdy planks of 40 mm thickness.The roof is hinged - so much easier to do regular cleaning and disinfection of the kennel.Ready house is set on a wooden board inside the enclosure, the construction of the rules you will learn in the next section.

Now is the time to consider, how to make an enclosure for Shepherd , as well as its optimal size.A well-built indoor enclosure securely covers the dog from the rain, wind, heat and cold at any time of the year.The optimal size of the enclosure for the German Shepherd is from 8 to 10 m2.Paul made from thick boards or asphalt is laid.In order to provide a clear view of the dog, one side of the fence must be equipped with a grid of steel tubes.All metal parts of the structure is coated with primer.

remaining erecting boundary walls of corrugated board, edged boards or flat slate.Also it is possible to recommend to use a wooden panel with a thickness of not less than 1 inch, assembled from grooved boards and treated with an antiseptic solution.The roof is made of lean-type edging board, as a roofing material is profiled or roofing material.The door to the cage set from the front.