Build Daily

Floor

August 12, 2017 18:05

Radiant floor with their hands

click fraud protection

Thanks to technology such as floor heating, the total temperature rises at times in the rooms and the comfort of the person.Warm floors are electric and water.Consider this article details the installation of water sex.

Content

  1. Advantages of installation of water floor with their hands
  2. step by step instructions installation of water floor
  3. Surface preparation
  4. Warming base floor
  5. pipe calculation and distribution
  6. installation of water floor
  7. Video water supplies Installationthe floor with their hands

The most common radiant floor heating installed where it is most needed.For example, in the children's room or bathroom.For the health of the child warm floor - is one of the most important conditions, as children are constantly on him playing with their favorite toys and running around barefoot, until they see the parents, and in the bathroom this technique will not catch a cold after the bath procedures.When you first hear about this technology, the photo of the water floor heating device can be viewed on our website.

Advantages of installation of water floor with their hands

floor heating technology has many advantages.Firstly, you can install radiant floor with their hands under the tiles, parquet, laminate flooring and under any other decoration material.This makes it possible to improve the conditions of residence for everyone.

Secondly, install radiant floor with their hands quite easily, because all you need to know can be found in this article.The main thing - it's strictly follow the instructions and use good materials.

Phased installation instructions water floor

Before proceeding to the reading of this section, carefully read the video installation of water warm floor with their hands on our website.It will help you to focus more clearly in the information, and will perform the work much faster.

If you decide to install radiant floor heating in a private home or apartment, you will need to, first of all, to buy the necessary materials:

  • solution for screed and floor leveling;
  • Waterproofing;
  • Damper tape;
  • foamed polyethylene;
  • insulation material;
  • The system of floor heating.

Surface preparation

At this stage it is necessary to dismantle the old tie, and then carefully align the surface horizontally.Then we laid a layer of waterproofing and anchoring damping tape, which will compensate for thermal expansion during heating.

Warming base floor

To heat, which will go from the heating system, do not go down, you need a good base to insulate the floor.If you plan to use floor heating as a supplement to the main heating system of a private house, the polyethylene foam can be used for warming the surface.If you are installing the system in an apartment, you can use Styrofoam sheets from 20 to 100 mm in thickness.Above the insulation is installed reinforcing mesh, which can be fastened themselves underfloor heating pipes.

calculation and distribution pipes

At this stage it is important to create a plan for placement of pipes in the room.This requires a good scheme of water underfloor heating, which can be found in the article or to calculate their own.To calculate the number of tubes and their distribution is important to know: the power of the boiler system of floor heating, room size, the diameter of the pipe, type of flooring, type of insulation of the room.

Usually pipe underfloor heating system installed "snake", as in the photo, thus achieving maximum results.The most common step in the laying of pipes ranging from 10 to 30 cm. Also, at this stage the collector set, which is placed in a special cabinet.Manifold cabinet can be built into a wall or hidden in furniture.

installation of water floor

Typically, installation and laying of water warm floor with their hands begins with fixing mounting profiles, which have a special slot tubes.It is very important during installation not to pinch the tube, because the system simply just will not work and could cause damage to your property.

The pipe ends must be brought to the collector and attach them using evrokonusnoy system.When pipe laying is completed, it is necessary to make a diagnosis and start the system to check.If all goes well, you can pour the concrete floor and install floor covering.Of course, first you need to wait to screed is completely dry.

Thus, install radiant floor heating in the bathroom, in the nursery, in the bath or bedroom can be quickly and cost-effectively.The main thing - is to carefully follow the instructions and follow the recommendations of the experts!We sincerely hope that we were able to answer your question, how to make the water warm floor with his hands.

Video installation of water warm floor with their hands

Video installation of water warm floor in a private home:

instagram viewer