Build Daily

Windows And Glazing

August 12, 2017 18:06

How to remove the glazing from the frame

click fraud protection

Modern window constructions are means of protecting the premises from heat loss and pollution, they provide reliable soundproofing and comfortable environment.

Content

  • for removal of glass
  • Replacing glass in
    • plastic frame Preparation for dismantling
    • Pre-disassembly window
    • process of withdrawal glass
  • Replacing the glass in a wooden frame

most fragile element of the window is glazed.It is susceptible to mechanical and physical damage, a consequence which it is necessary to replace or repair the glass.In order to make the work does not always need to call a specialist, you need only to know how to remove the glazed .

for removal of glass

Tom to remove the glazing of the window frame, as a rule, preceded by a number of significant motifs.Consider the main ones:

  1. Broken glass - this is the most compelling reason why you need to remove and replace the damaged glass sheet.
  2. antifrost or fogging of the window - this is a sign that the glazing has lost tightness properties and in need of repair or replacement.
  3. Decrease sound-proof characteristics, which leads to the discomfort of people living in the area.

in the wake of the way you tap the base to replace the old structure, you need to pick a new product based on the type, glass thickness, coating and their quantity.However, the primary task - to remove the glazing.This process, despite the apparent simplicity, yet has a number of subtleties that should be considered separately.

001

Replacing the glass in a plastic frame

vast majority of consumers chooses plastic windows, the dismantling of which has its own characteristics.This window has a high strength, wear resistance, ensures ease of operation and maintenance, as well as ease of maintenance.But when disassembling this design focuses on the removal of glass.

Preparations for dismantling

At the initial examination of the damaged windows, as a rule, there is an opinion that is quite difficult to make out of metal and plastic window from a technical point of view.However, there is a proven and simple method, which should not be abused to avoid damaging the mechanisms.

should adhere to the requirements and regulations for handling glass seizure, carried out each step in sequence.In addition, special fixing materials, tools and equipment, in order to avoid unpleasant consequences must be used.So, to remove the glass, you will need to prepare the following:

  • suckers of rubber;
  • ax;
  • protective gloves;
  • spatula;
  • screwdriver in the set;
  • knife.

002

Pre-disassembly window

Before you remove the glazing should be disassembled construction Plastic windows, making the action as much as possible carefully and neatly.The sequence works as follows:

  1. Initially, you must remove the special retainer rod of the top hinge of the window.
  2. then remove it from the opening.At the same time be extremely careful, because the unit design is lightweight and not very convenient for the holding hand.Better bring another assistant or to prepare special grips, the use of which will not allow the fall of the transoms, glass breakage or sash.
  3. remove the plastic frame slowly and carefully lower the floor and leaned it against the wall.
  4. then proceed to dismantle the fittings with sash.To do this, unscrew the locking hardware and unscrew the locking mechanism.
  5. window handles must be removed only by using a special screwdriver, which coincides with the cross section of the fastening element.

Important! order to maximize beskhlopotno to put in place a new glazed structure extracted, it is recommended to put all accessories in series, as you use it.This will keep each element, without the risk of loss, and visually indicate the way back the installation of a new product in the window frame.

003

process of withdrawal glass

After the preparatory work and disassembly window structure, you can begin to dismantle the glass.The sequence of actions is as follows:

  1. Initially, you need to prepare a knife or an ax - not too spicy, but not blunt, to provide insight into the narrow gap.
  2. then tip the tool to the glazing between the fixing frame and glazing bead, along the vertical seam.Actions to be performed with the utmost care not to leave chips and scratches on the glass cloth to complete the work.
  3. necessary to press once on the entire length of the blade, so that he could get to the desired location and push the bead at least 1 mm.

1

  1. slowly turning the handle, pull the window sash from the bead.Spend a similar effect with the entire frame.
  2. In the wake behind it, moving along the plane of the glass, remove the hand attachment member.In this case it is not necessary to pull it toward you.
  3. Similarly, repeat the process with the lower horizontal Shtaps.
  1. Then proceed to the dismantling of vertical glazing bead, and followed him, and the upper horizontal.Change this sequence is not desirable because the glass may fall earlier than necessary and be damaged.

2

  1. Then gently pry the top edge of the glass cloth and gently tilt it toward you.
  2. Now you can extract the glass, holding it with both hands on the vertical edges.
  3. IGU unframed carefully tip the wall.

3

recommendations to the process:

  • for uniform punching design is advisable to use simple household brush or towel;
  • to remove glazing without much difficulty, it should be gently press down on the canvas on the outside, slightly tilting it towards you;
  • place where will be placed withdrawn glazed need to prepare in advance - on the floor lay a cardboard sheet or blanket.

004

Replacing the glass in a wooden frame

windows in wooden frames have the features installation, implying the presence of a glazing bead optional silicone layer.Therefore, removing the structure would have to cut the sealant holding the glazing from a possible loss.

Important! glazing beads themselves are usually made of wood, like the rest of the window frame.They are fixed by means of special pins, which are quite difficult to remove without special tools.For this reason, work on dismantling must be carried out very carefully to avoid damaging the components.

For high quality of removal and replacement of glass in a wooden frame should be prepared such tools:

  • air gun for pouring sealant;
  • spatulas;
  • shpilkozabivatel necessary to bend the studs themselves;
  • gloves;
  • compressor.

5

process of extracting from a wooden glass window structure occurs in the following sequence:

  1. Initially glazing beads must be removed by means of special plastic blades.Actions should be done carefully so as not to damage the paintwork of the frame.
  2. Remove the protective layer of sealant, using a construction knife.
  3. lightly pressing on the upper edge of the glass, remove it, knocking over.It is advisable to use vacuum suction cups, to avoid falling glass from his hands.
  4. Thoroughly clean the grooves and the frame of various contaminants and the old silicone layer.
  5. Carefully check the structure for mechanical damage or the appearance of moldy fungus.As necessary, perform restoration work, seal the chips and cracks.
  6. docking place the new glass must be treated silicone layer on the outside of the window.

Guide to the rules regarding the dismantling of the glazing shown in movies:

instagram viewer