Folding table with his hands

Folding table - it is convenient and practical thing, indispensable in many situations.Folding tables are ideal for small apartments and houses, as it does not only save space, but can easily be transformed into a large dining table if needed.Picnic Table sofa will fit easily in the car and give the outdoors comfort and convenience.The advantage of this furniture in the fact that to make a folding table with his hands is not difficult.Needed only drawings, materials, tools and desire.

Some information about Folding tables

Speciesdesigns, there are many folding tables.Depending on the functionality of their different appearance and size.But it integrates all design solutions one detail - the height is always greater than the fold-out part, or table just does not work out.Ready table decorated with a variety of ways, appropriate to its purpose.For example, paint or decorate decoupage in any color.

Apply folding tables in various spheres of life.They are used as the units for portable trade, use them on picnics, set in the cottages as a seasonal dining table in the open air, often buy such furniture in the apartment, which the area is insufficient to establish a fixed dining table for large numbers of people.

In accordance with the scope, tables vary by type of material.For outdoor use are ideal structures made of aluminum with a top made of plastic.These materials do not corrode, but weigh little, which facilitates their transport.But in the house of this furniture will not look very appropriate.It is better to opt for a tabletop made from natural tree, veneer or laminated fiberboard, with wooden frame.

tables also differ in the form of table-top - a rectangle, circle, oval or square.The most common tables with tops in the form of a rectangle, as this form of the most versatile and easy to use and storage of the table.used wood, aluminum or steel for table legs.If the legs of the table are arranged in parallel, such a structure has a lower stiffness, but to sit at the table is not very convenient.Crossed legs make the table maximum stability.

legs folding tables attached permanently or made removable.Sometimes they are equipped with threaded height adjustment, it is very convenient for outdoor folding tables, as it gives the opportunity to adjust the horizontal level countertop.When planning to make a folding table with his hands, the drawings should be studied carefully and choose the design of not only the largest countertops and design, but also on the carcass characteristics, in particular, on the intended location of legs.

If you need a folding kitchen table, the ideal material for it is a wood or laminated fiberboard and frame construction - parallel to each other's feet.Tables of such material will last long in the building, with the proviso that it will not spread too much.These materials allow you to create especially beautiful furniture, it is therefore recommended as a basis for the domestic interior.But as a picnic table or garden table optimally suit of lacquered plywood.It does not saturate with moisture and does not deteriorate when used outdoors.Feet in this case must be placed crosswise to the table can be easily folded and did not break from frequent use.

Picnic table with his hands

Outdoors even more pleasant and comfortable, if you do not sit on the damp ground, and sit comfortably behind a small fold-out picnic table.The same goes for fishing trips and any trips out of town.Made this furniture is quite simple.First we need to see the drawings in order to better study the structure, which will be made on a folding table.Photography and design the necessary elements are located below.Dimensions in the drawings, if desired, any other change that are needed in view of all proportions.

table design is simple and does not require complex manipulation and a large number of accessories.manufacturing algorithm looks like this:

1. on the circular saw to cut all the bars.Their size and number indicated in the photo with the drawings.If there is a circular saw, it is replaced by a conventional or any other convenient instrument.
2. Make countertop from any convenient material - lacquered plywood or wood.Table tops covered with several layers of varnish, as it is this element of the table takes the brunt of water while on the street.Moreover, such a tabletop is easier to launder from different spots.
3. harvested Go back to the bars.All saw cut they need to cover skirting tape.Jigsaws round sticks for legs and supports grazing.In the presence of these elements with the polishers is cut at right angles and then smoothed by machine.
4. When all the parts are ready to begin the process of bonding together.To begin, connected to each other and support legs.Then on the table markup is applied to fasteners.Mounting of parts is carried out by means of screws for wood to 35 mm in diameter.
5. All items of the table are numbered, make out, grind their irregularities and treated with varnish.Now the table is collected definitively.

This design involves whole countertop.It is very convenient to use, as the table in less moving parts, the less likely that over time it will lose its stability.But such a transformation table varies in size only by the folding legs, which makes it not very compact.For transport in a car with a small luggage better fit design with a two-part table top.Does this table is also quite simple:

1. worktop is made for this purpose, two pieces of equal size plywood.Dimensions 340h500 mm.
2. Make a 4 foot section of the bars 40h20 mm.Each leg drilled two holes measuring 6 mm is selected for penetration of the bolt head.Planting bolt is chosen in such a way that they were on the outside of the table.
3. Do crossbar 4 500 mm for the main frame.This item will be placed on the table, and serve as the main edge of the table rigidity.Holes are drilled into the crossbar by the same rules as for the legs.2 Do
4. crossbar to the legs, the length of 380 mm.
5. All the parts are assembled, focusing on the figure.

Another handy and compact version of the picnic table - a table-suitcase.In this case, do not just add up the legs and table top and the table is going to present a suitcase with a handle, which is convenient to transport, even by public transport.To produce such a table will need:

• 2 sizes 50x60 cm sheet of plywood;
• 4 timber size 44 cm;
• 2 timber measuring 60 cm;
• 4 beam of 52 cm;
• screws - 30 pcs;
• nails - 50 units;
• suitcase handle or doorknob;
• 2 loops of 60 mm;
• 2 suitcases latch;
• furniture screws to secure the legs.

table assembly algorithm:

1. to start going to the frame.Make two frames of the same size - 50x60 cm, fasten them with screws.The finished frame is similar to a small low box.
2. on frame screws securing the hinges so as to connect both boxes with each other.
3. At point 4 equidistant holes for legs, they should be 1 mm larger than the diameter of screws purchased furniture.Next are marked places for holes on the legs and immediately drilled.Now
4. legs are bolted to the frame and checked the stability and symmetry of the entire structure.With
5. end frame is screwed handle and latch, the table is ready.To disassemble the table of this design, it is necessary to unscrew the legs, put them in a box and close it like a suitcase.

table processing any of the structures described above is carried out the same way - it is treated with stain, varnish or paint.This will not only improve the appearance, but also extend the service life.The beauty of the product will also give a slightly different structure countertops.The above described manufacturing algorithm table with top made of a single piece of wood or plywood, but if you make it out stuffed after a certain period rails, then this table will look much more interesting.

mechanism of folding in the table-suitcase modernized with stabilizers, which are screwed legs.The whole structure is connected to each other, the legs are arranged so that they are easily went beyond the inner edge of the frame.Now construction going without loosening of individual elements.

Dining table folding his hands

Produce easy not only to the picnic table, and a beautiful functional home furniture, such as a fold-out dining table.The manufacturing process is not a big deal.The most time consuming and forces step will be to make all the details, and he himself is going to table quickly and easily.You only need to have on hand drawing.

1. A - tabletop size parts - 700h670h20 mm.It is necessary to make 2 pieces, the recommended material -. Hollow panels.
2. B - table top, the size of the details - 700h200h20 mm.It is necessary to produce 1 piece recommended material -. Blockboard.
3. B - table leg size - 720h190h20 mm.It is necessary to make 2 pieces.
4. F - side-bar size - 638h190h20 mm.It is necessary to produce 1 piece.
5. D - podstole size - 628h190h20 mm.It is necessary to produce 1 piece.
6. E - timber frame horizontal size - 500h40h25 mm.It is necessary to make 4 pieces.
7. F - timber frame vertical size - 500h40h25 mm.It is necessary to make 2 pieces.
8. W - movable leg size - 720h40h25 mm.It is necessary to make 2 pieces.
9. And - Piano hinges, you need 4 pieces.

table manufacture Algorithm:

1. to start all saw cut on the parts to be processed edge.
2. Assembly begins mounting the central part of the movable leg, bars vertical and horizontal position.In the diagram, these parts are designated by letters H, M and E. Mounting by means of the deaf straight spines.
3. assemble countertop, for this it is attached leg, drawer side and podstole.In the diagram, these parts are designated by the letters B, D and E.
4. -round detachable spikes fixed to the ends of the legs of the cover (B).
5. design of movable legs and a frame equipped at the end of the elastic button or metal, and then attached thereto piano hinges.
6. table assembly is completed, it is now only need to varnish or other means of their choice.

How to choose a folding table

main parameter when choosing a folding table - its intended functionality.Tables are large and small, equipped with folding chairs or without them.If you plan to use a table for a large number of people or set it as a fixed street furniture for the summer season in the country, it is better to opt for a table with a top made of aluminum and steel frame.This table will withstand a considerable load and accommodate a large number of people.Often these designs are completed with a cover, which will become a convenient tool for safe storage of the table.

Buffet If you plan to use and rarely for a small company, the model will suit medium size wood or aluminum.For outdoor use it is best to opt for the second option.The design of the folding table is one of the most important factors - its small size and weight.Since the folding table is most often used for trips, it is necessary to fit easily in the trunk of a car.

most often used to make tables material - wood, steel or aluminum.Each has pros and cons.Aluminum weighs little and is not subject to corrosion, but by itself is very soft and short-lived.Steel is solid and reliable, but is afraid of water.Wood requires care and protection from external influences, while its weight is greater than that of aluminum.