Scaffolding with their hands

Before starting to erect scaffolding, you need to decide on the material from which they are made, and what kind of forests (more precisely, the method of attachment) to you, in fact, unnecessary.

Today there are two materials from which to fabricate scaffolds with their hands.This is either a tree or metal.Accordingly, constructs may be prepared either metallic or wooden.But if we consider the ways of fastening elements of these forests, the species will be more.It:

defined the varieties, you can proceed to the question - whether to build even the most simple scaffolds with their hands, or is it to trust this occupation masters of their craft.In case your solution is uniquely cost-effective, you can view detailed photos and video ideas on how to quickly and efficiently collect the scaffolding yourself.By the way, there you will find a hint of how they then store, or disassemble this structure, until the next application.

Drawings scaffolding

general need to understand that collecting Scaffold own hands drawings, can greatly facilitate the task.Acting in accordance with the existing scheme, you will quickly cope with the installation.The only thing you need to learn is the fact that all forests are made up of elements such as:

As you can see, scaffolding with their hands to learn and collect is not so difficult.But is it appropriate?Indeed, in most cases, these designs are not any there goats, platforms, and serious construction designed to carry out heavy work at a certain height.

scaffolding assembly instructions

In this case, the forest assembly involves the use of wooden materials, because very few people come to mind in the summer conditions assembles metal scaffolding, unless they are ready-to-assemble elements having smalldimensions.

A wooden scaffolding, made with his own hands, may be useful only for work at a level not exceeding the second floor and is mainly for repair and facade work.Their use in more difficult conditions and can not be simply impossible under high loads, but also dangerous.Nevertheless, that you still do not get confused in the assembly stage, we offer you to use the manual assembly of the simplest designs.

First of all, you should remember approximate values.Namely:

1. distance between the uprights shall not exceed the two - two and a half meters.
2. width of the deck to work should not be less than a meter.
3. total height of the structure shall not exceed six meters.

Now - to work!In order to proceed with the assembly, it is necessary beforehand to prepare all necessary materials.It will:

• boards with a thickness not less than fifty millimeters and a width of not less than one hundred mm.Can they replace the timbers 10x10 or round timber for the abutments and pillars.
• fence boards and struts.Their thickness should be at least thirty millimeters.
• boards for decking and bridges - 50 mm thickness.
• Nails.But do not try to replace them with screws - in this case they are not reliable comrades.

1. Observing all the distances that were indicated slightly higher on all four sides fasten four racks with existing diagonal braces.

2. Secure the jumper boards on the altitude at which you want.

3. On set jumpers secure floorboards.

4. Ensure a reliable guard, beat specially prepared for this board.

5. Install stops.

Now you can proceed to the immediate repair and construction work on your site!

Video fabrication of scaffolds with their hands