Build Daily

Miscellaneous

August 12, 2017 18:06

Acrylic , enamel or liner for the restoration of the bath

click fraud protection

If your old cast iron bath has fallen into disrepair and was covered with spots, it is not necessary to buy a new, spending a lot of money on it.Today, there are plenty of opportunities to restore the old plumbing fixtures.Modern materials can restore the original tub attractive.Acrylic, enamel liner and bath restoration - the main methods of its recovery.Let us consider each of these in more detail.

It may look like a renovated old cast iron bath

It may look restored old cast iron bath

use for the restoration of enamel

oldest and most traditional method of restoring old damaged plumbing is to cover it with a new layer of enamel.The disadvantage of this method is its excessive length, which is due to the need for careful preparation of the surface.The very color of the selected type of enamel and shade happening fast enough.Modern enamel is different shades, so little effort, you can get a bath of pink, blue, green or any other color.

In this method, there are undeniable advantages:

  • old enamel bath Painting is the cheapest of all methods.
  • There is no need to conduct any dismantling and removal of the siphon.
  • painting itself does not require much time, in fact, to fully cover the prepared enamel bath will need no more than one hour.

method Cons:

  • Since there is yellowing of the white enamel.
  • Lacquer quite sensitive to shocks.
  • too time-consuming preparatory phase, during which the necessary to remove the old paint with sandpaper.
  • Neither enamel which can not hide the significant surface defects bath.

costs of the restoration with the help of this method can range from 50 to 100 USD, including spending on supplies to eliminate surface defects.

The main steps of the process of restoration enamel bath

main steps of the process of restoration enamel bath

order of restoration following:

  • preparatory work, including cleaning of the surface of the original cover with sandpaper.
  • Covering ground surface primer.
  • bath painting in three layers.It should be remembered that the wait to dry prior to application of the subsequent layer should be 20 minutes.Moreover, the whole process should not stretch more than an hour.Otherwise, the coating will become worthless.
  • For a complete drying of the restored bath required 1 day, but pour the water and start using sanitary appliance is only after five days.

Restored manner bath will serve you faithfully for more than one year.

What are the advantages of acrylic bathtubs liquid

One of the easiest and convenient methods for the restoration of the bath is repair it with acrylic.Today it is the preferred method, since it does not require any special knowledge and skills.Acrylic plastics are a special fluid, which simply spray the inside surface of the bath.Begin to do it from the top along the whole perimeter, gradually decreasing closer to the bottom.

Apply acrylic bathtubs need to edge , so that the liquid spread out on all the surfaces themselves.

Apply acrylic bathtubs need to edge, so that the liquid spread out on all the surfaces themselves.

Pros acrylic method, the following:

  • repair technology is very simple, and plastic drying takes place in just 36 hours.Then use the bathroom already is not limited
  • This method of restoration is very reliable because it does not involve any layer between the cast iron and acrylic.
  • acrylic surface does not yellow over time.It can be processed by any detergent and alkali powders without forming cracks and abrasions.

Cons acrylic coating:

  • Producing restoration is only possible when removing the drain siphon.
  • The color of acrylic should be performed very carefully, because the slightest defects become very visible on the surface after drying.

From an economic point of view, the restoration of the bath procedure with the help of acrylic will cost about the same as in the restoration of the enamel, which is about 50 - 100 USDSince in this case requires the dismantling of the siphon and is likely to be replaced for a new one, this amount should be added and this costs.

acrylic Installation is made in the following order:

  • In the course of the preparatory work is carried out thorough cleaning of the old surface of the bath.
  • dismantles completely drain siphon.
  • painting produced entirely without the use of brushes.You just have to cover the acrylic inner surface of the bath, pouring the plastic on the edges and allowing it to flow down the walls to the bottom.
  • After applying the acrylic need to wait at least 36 hours before full restoration will be finished.After that it is possible to begin to fully utilize the updated bath.

advantages and features of the acrylic liner

There is an even simpler method of restoration of the old baths.For this purpose the insert which accurately reproduces the shape of the inner surface.It is made from the same acrylic.Install the insert in its place there is no difficulty:

  • The old bath is necessary to measure and acquire the acrylic liner that most closely in size and shape to fit your bath.
  • It is inserted into the iron and glued a special assembly foam, which in addition also has insulating properties.
  • taped box filled with water and leave for a day.During this time, the insert takes the form of your bath.

This simple restoration is easily made with their own hands, there is no need for special knowledge for it.Terms of Service acrylic liner is approximately 15 years.

Driving liner assembly for acrylic baths

scheme liner assembly for a bath of acrylic

Advantages of this method:

  • bath acrylic liner Recovery allows you to create a much more durable, attractive appearance, durable finish than as a result of normal enamel.
  • Eventually acrylic plastic is not covered with yellow, which allows for a long time to maintain an attractive appearance.
  • After completing the work, we get a perfectly flat surface, hiding under the insert all the bumps and iron deficiencies.
  • No need to somehow especially to prepare the surface of the bath.Old enamel carefully should not be removed, it is sufficient only to remove loose particles and clean them.

The disadvantages of the method include the following:

  • not for each of the old cast-iron bath can be ideally choose the appropriate insert configuration.
  • Acrylic liners are not suitable for installation in a steel bath.Before you begin to repair with the use of acrylic plastic insert, make sure your bath is made of cast iron, not steel or iron lung.
  • Installation need to dismantle the drain trap that is set in place after the work is completed.This process increases the duration and the complexity of repair.
  • liner is installed on a special foam, which, when not used properly, will start just come unstuck.
  • Restoration of this type can only be applied to public baths, which can not wall up into the wall.

plastic insert cost is not very high, but the repair is made up of several stages.Insert itself cost about 80 - 120 USDBut we must still order gager services that accurately calculate what shape and size you need, this procedure is about 10 USDRemoving the drain trap is also not free.If you do not know how to do this, you will have to pay about 15 USDIf the bath is immured in the tile, it requires the dismantling of what else will increase your costs.

Driving removing the geometric dimensions of enamel bath

Driving removing the geometric dimensions of enamel bath

liner installation works should be carried out in the following order:

  • At first surface of the bath is cleaned of visible contamination.
  • dismantle the old drain trap.
  • On the inner surface of the iron bath to apply a special foam, which is glued liner.
  • The bath is poured to the top of the cold water and leave for a day like this.
  • Then the water is drained.
  • cut a hole in the liner under the drain trap, which put in place.

materials that are necessary for the restoration:

  • Suitable acrylic liner.
  • Special adhesive foam.

Features care bath

restored to the restoration carried out has become completely successful, and very old cast iron bath has served the maximum number of years, it is necessary to ensure the correct and competent care of her after the end of the work.

following basic rules are proposed, which will enable you to keep a bath in excellent condition as long as possible:

  • Wash updated capacity is possible only with a soft sponge using a special detergent, soap or quality synthetic laundry detergent.Importantly do not use detergents, as part of which contain various abrasives.
  • for the restoration of the old baths imposed such a restriction, as the ban on soaking in their underwear, because prolonged exposure to detergents can cause harm
  • enamel when using bath intended first is to pour cold water, and only then to dilute it with hot to the desiredtemperature as too hot water is also harmful to the updated cover.
  • Avoid rough strokes and other major mechanical loads and impacts on restored cast-iron bath, as the new coating can rapidly deteriorate.
  • Do not pour in the boiling water bath updated.

If properly follow all the above rules, it carried out the restoration is successful and bath lasts a long time.The minimum term of the renewed use of the bath is at least 10 years.

restore old worn out bath is not so difficult as many believe.This can be done in the usual way, causing a new enamel.However, much more correct today use liquid acrylic or liner.Each method has its advantages and disadvantages, and the choice you make.In any case, the cost of a new bathtub is much higher than the cost of any restoration work of the old appliance.

instagram viewer