Doors for the dressing room : features selection and installation

Few nowadays surprise dressing room, be it in the elite apartment or in the old "Khrushchev".Its presence - not just a fad, but the realization of a desire to get rid of bulky cabinets to hide things that are used infrequently, and do not throw rises hand, and simply arrange things and shoes.And as the theater begins with a hanger, and dressing room starts from the door.After all, it must not only be functional, but also appropriate to surrounding interior.

Which to choose a door to dressing room

currently, there is a great range of doors for the dressing rooms.If you choose, you can get confused: Whether to install sliding doors in the dressing room, or should buy folding doors, and can simply install partition?It is important to understand that the door systems installed in the event that dressing room is a separate room, and the partition when dressing for the highlighted part of the room.And of course, if the dressing room door will not be in harmony with the general style apartments or rooms, they will look ridiculous and alien.

To dressing room door could fit into any style of home design and designers from different manufacturers have tried their best.Choose between a door in monochrome design, frosted or translucent glass covered with white paint and a variety of other original finishes.At the same time the door for walk-in wardrobe is not only beautiful, they are distinguished by their quality and durability of use.

Swing doors in the dressing room

prerequisite for installation of swing door should be free space in the zone of its opening.In addition, to save space in the dressing room, opening the door would be best to install so that they open outwards.

Such a door system refers to a classic: for installation in the wardrobe perfect ordinary interior doors.They have a number of advantages:

• economy;
• durability of operation;
• good compatibility with the overall interior design;
• when opening gives a good overview of the dressing room;
• large selection of materials and design style.

For relative disadvantages of this door system can be ranked:

• standardization;
• need additional space (especially the two-step model).

The most common designs are swing doors, panel-mounted (solid shield with a thickness of 3-4 cm, which is lined on both sides).Most of these models are covered with sheets or MDF shaped panels.The most expensive doors are pasted over with veneer, acquiring resemblance to natural wood.It is noteworthy that the choice of color is up to the buyer until the exclusive.

Framework hinged doors have an original design ideas and are made of precious wood.Additionally, they can be decorated with stained-glass windows, the unusual accents or tinted windows.

At its core, these doors are a frame which inside is filled with paneled panels (as well as glass and various elements).

The combined system of swing doors used Compound elements such as siding, piping or filling, as well as switchboards fabric with a variety of accents for decoration.

Massive doors made of wood (oak, beech or cherry) are particularly robust and durable, but require special care and are expensive.But the glass structure of swing doors, though not very practical, but it provides a great opportunity to design experiments.

sliding door for walk-in wardrobe

sliding door design is most suitable for small areas, because the door leaf moves left - right.In addition, they have a number of other advantages:

• security - this is especially important in the case if a family has children and pets (can not fear accidentally pinched fingers or paws, and even out of the wardrobe if you accidentally close a door will not belabor);
• ease of installation;
• large variety of door sizes (up to the non-standard);
• in case of failure of any element of its design easily replaced.

When selecting sliding doors need to be considered and their drawbacks:

• higher cost compared to the swinging structures;
• because of gaps easily pass unwanted odors (especially important if the dressing room is located near the kitchen);
• fragility of design sliding doors, which leads to their failure;
• when moving along the guide rails publish a small, but still noise that can interfere with sleep of other residents in the adjoining room;
• limited viewing dressing room.

system sliding door wardrobe includes:

• sturdy frame;
• sliding mechanism consisting of aluminum extrusions, rollers and bearings (it closes decorative elements for aesthetic reasons);
• door panels, which are made of various materials, and differ greatly in style;
• accessories, including a set of fasteners and handles;
• set trims.

Despite the fact that the choice of materials of construction for sliding doors, large, most often use glass and wooden structures.Nowadays more and more popular mirror doors.They, as well as on conventional glass can cause a beautiful painting, sandblasting and fusing pattern (one of the most popular techniques of creating stained glass).Mirrored surfaces may be made of tempered glass and laminated safety glass (laminated glass), which greatly improves their durability.Plastic is most often used in the interiors of youth (plain translucent or tinted).

Some potential buyers confuse the sliding door sill, which is formed from the lower guide.This inconvenience can be avoided by stopping the choice on a curtain system that is attached only at the top.Thus it is necessary to consider that such a system requires a perfect level floor and ceiling.

Maybe you are interested in the system of "smart threshold": when you close the door threshold is lowered built from the groove of the door leaf, and when opening the threshold automatically rises (which will cut off the penetration of odors in the dressing room).

Species sliding system door

Folding doors conventionally divided into:

• door-book for the dressing room, the mechanism of which consists of two parts: Part 1 loops mounted on the box, and the 2nd is equipped with a roller and moves onguide;
• folding doors consist of several sections connected by hinges, which are open just added.

-in Sliding Doors for the dressing room long been loved by our compatriots for their durability and reliability in operation.In the dressing room door is most often installed, consisting of a single leaf, which moves through the guide rollers.Experts say that if the rollers and the guide will consist of different materials, it is the less noisy the whole structure.And if the complete brush seal will be present (it is set on the perimeter of the door opening), then this will delay the penetration of unwanted flavors.However, this design does not allow the door to put furniture and other interior items tightly to the wall, along which moves the door leaf.

door-case is a hidden system of sliding design.Door leaf disappears into the wall or plasterboard box.Such a system does not need a floor guide.The uniformity of leaf movements contribute floor controller and the lower guide profile, which are hidden under the canvas itself and absolutely not visible from the outside.Doors-case looks very aesthetically pleasing, but the installation of a door system is the most complex and time-consuming.

Roto-door equipped with a unique mechanism that allows you to open the door from both themselves and for themselves.In this case the door leaf is rotated on the axis and remains within the opening.Undoubtedly, such a system will surprise with their originality, and also in the dressing room and from it you can carry things, even if your hands are busy.

-tech doors are made in a very modern style, and on the principle of action in something reminiscent of the door-case.However, the sliding mechanism of this system does not require the installation of hidden - on the contrary, its stylish elements emphasize the surrounding interior.Door leaves of this design are made of metal, tempered glass and other modern materials.Moreover, an additional advantage is that the installation of such doors to the dressing does not take much time and effort.A wall panels and telescopic trims decorate allow opening of any depth.Also, the owners of this modern system deservedly appreciate its silence.

few detached from all kinds of door systems stand radius the door (or radial).Most of these doors are sliding.Their peculiarity lies in the fact that the door leaves are curved (convex, concave, oval, round or combined).Radius doors to the dressing rooms are made only under the client order, and have a correspondingly high price.When ordering such an unusual door system, you can specify the desired radius of curvature, size, material and color.Such wardrobe doors with their hands is unlikely to succeed to install - it takes a lot of precise measurements and calculations.

sliding doors to dressing room with his hands

When purchased the entire set of the door system, it is possible to start the installation (for example, sliding doors).

1. Get started with the marking should be places where rail will be fixed.
2. Next fastened top rail with screws to the doorway or ceiling.
3. lower guide (if it is provided in the structure), you should not rush to fix.At first she just applied to the floor parallel to the upper track.
4. in the upper groove of the guide track is inserted into the roller mechanism door coupe.
5. lower rollers pressing fingers to drive inside the door leaf (there is a spring mechanism), and then set the bottom of the guide groove.
6. Using a builder's level, the canvas in the opening exhibit.And then, a pencil to note the exact location of the lower track.
7. door leaf is removed and installed by marking the bottom rail.And how to install the door leaf is repeated.
8. After installing the fabric necessary to make adjustment sliding doors.To do this, twist the hex adjustment screw (located on the lower side profile of the door).
9. Then proceed to gluing the end of the brush-boot on the side of the surface profile.
10. At the end of the device exhibited fixing spontaneous opening of the door-coupe (stop-positioners).

Over time, during the operation may need a little adjusting and minor repairs: you can return it to its place

• should be inspected periodically guide, did not come out if she from the "nest" (using a conventional hammer and wedge);
• if you notice deformation roller, simply replace it with a new one;
• possible violation of regulations, then again use the hexagon and tighten up an adjusting screw;
• clean from dirt guide, and they last much longer;
• durability and promotes the use of lubricants to the roller mechanism and the guides.

can be done with due skill and desire the door to the dressing room alone.It is recommended to opt for those materials that are easily treatable.Because the manufacture, for example, a mirror door leaf will be impossible without special equipment and skills.The same applies to safety glass.Therefore it is best for the independent production of door leaf suitable natural wood inexpensive breeds (pine, poplar or apple).And to insert, you can use plastic, acrylic glass or even specially made sheets of paper (you can easily paint the thematic patterns).

How to install sliding doors in the dressing room: video

doors to dressing room: photos