Repair of wooden doors - how to give them a second life ?

repair of wooden doors - the main stages of work

door is an integral part of almost any interior.It reflects the preferences and tastes of the owner of the house, it demonstrates the level of income and the degree of accuracy.Of course, scratched, chipped and has lost its former luster wooden door - not the best decoration of premises.But do not jump to conclusions and to carry it to the dump.Take a closer look, not everything can be so terrible?

Experts say that repair of wooden doors (with rare exceptions) can and should do - something you can disguise, but something profitable and loses possession.However, in a particular case, all work should be carried out in stages.Before starting work, you must carefully remove the door from its hinges!In the first stage, the removal of old protective coating, which is typically made of wood varnish.

If the wood is painted, it will have to make a little more effort, as the paint is well able to absorb it.Removed from the canvas cover and door box to "clean" wood.The second stage is the restoration work - the removal of chips, cracks, scratches.The third stage - the preparation of the product to the finishing (varnishing or new paint).The fourth step is carried out of his painting, and the fifth - to set the desired accessories.

doors Restoration - remove old paint and mask the defects

If your door is covered with lacquer, then to remove it will need regular fine-grained sandpaper.When choosing a high degree of abrasiveness of the material is great risk that you damage the wood, leaving her ugly and deep scratches.If the door is painted, you can use a hair dryer or a building with a chemical agent.When using the dryer construction is necessary to heat the surface of the product so that the paint began to swell and fall behind.At this point, it is easy to remove the hook and with a spatula.

Note: When using chemicals, obey all the data in the manual tips!Otherwise, you may damage the wood .After removal of varnish or paint is necessary to examine the door for cracks, chips or scratches.The detected small defects can be masked in several ways.

So, one of them involves the use of a suitable color fillings, and the second - a special wax.In the first case it is necessary to carefully selecting suitable filler as ideally as it can merge with the color of the door leaf that can be dispensed without finishing painting - will be sufficient to varnish product.In the second case, the wax gently rubbed into the cracks until they are completely filled.

the presence of deep cracks is better to use special wax pencils, matched the color of the wood.

restoration of wooden doors - go to the finish line

After drying wax or putty can start to prepare the surface for painting doors.For this purpose it is necessary to grind all using the same fine grain sandpaper.For convenience, you can use a drill with special grinding nozzles or hand grinder.At this stage, it is not necessary to hurry up, because as a result of the work you need to get the most even surface doors.After sanding with a damp cloth, clean the product from dust and other dirt, let it dry.

Then you can start painting or drawing of a varnish for doors. Remember that all work must be carried out at horizontal canvas that will provide a uniform distribution of the coloring composition or varnish.If you chose to paint, then apply it in two layers with a break for the complete drying of the first layer.All similar actions must be carried out with the door frame and, if it is suitable for use.

Otherwise, you should prepare the base wall at the doorway to the installation of new boxes.The final touch, which provides for the restoration of wooden doors, is to replace the hardware.Thus, at least for your buck, a little time and effort - all of this is that your wooden door regained its attractive appearance.